Skip to content
CostLocal

Attic insulation cost in St. George, UT

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (1,000 sq ft)
$910 – $3,700
Per sq ft
$0.90 – $3.70
before permit
Versus US midpoint
−8%
US $2,500
Rank of 300 metros
#284
1 = most expensive

St. George homeowners pay roughly $910 to $3,700 to insulate an attic at 1,000 sq ft, or $0.90 to $3.70 per sq ft (permit not included). Against the US midpoint, St. George is 8% lower. Insulation workers, floor, ceiling and wall earn a median of $19.27 an hour in the St. George area, 18% below the US median of $23.62.

Estimate your attic insulation cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Higher R-value with air sealing around fixtures

Estimated cost for 1,000 sq ft in St. George, UT, standard level

$1,750 to $2,850

About $1.75 to $2.85 per sq ft before permits. Labor is about 33% of the bill.

Cost breakdown
PartLowHigh
Materials$1,100$1,950
Labor$630$900
Permits and fees$0$0
Total$1,750$2,850
Save and get a PDF report

Cost breakdown for 1,000 sq ft in St. George, UT

Part of the jobLowMidpointHighShare
Materials$480$1,550$2,60067%
Labor$420$760$1,10033%
Permits and fees$0$0$00%
Total$910$2,300$3,700100%

What is behind the St. George number

We price the labor side from BLS wage data for 2 trades: insulation workers, floor, ceiling and wall at 80%, construction laborers at 20%. Weighted together, St. George wages are 0.85 times the national level. Labor makes up about 33% of the midpoint estimate (36% at national prices). BLS does not publish this trade for the metro, so we used the Utah statewide median.

On the materials line, the BEA goods price index for the St. George metro is 96.4 (US = 100). The midpoint materials bill for 1,000 sq ft comes to $1,550, compared with $1,600 at national prices. Permit and inspection fees are scaled by the broader index (97.3) and land at $0 to $0.

Data note: 80% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in St. George. The wage table below marks each row.

Is St. George cheap or dear? The local comparison

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 1,000 sq ft range from $2,250 to $2,400 across St. George and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
St. George, UTthis page$910 – $3,700$2,300
Lake Havasu City, AZ110 miles$870 – $3,600$2,250−3%
Las Vegas, NV110 miles$960 – $3,850$2,400+4%
Flagstaff, AZ135 miles$920 – $3,750$2,350+1%
Prescott Valley, AZ190 miles$920 – $3,750$2,350+1%
Provo, UT190 miles$910 – $3,700$2,300level
Utah (statewide)$910 – $3,700$2,300level
United States$1,000 – $4,000$2,500+8%

Across 300 US metros, St. George comes in at #284 from the top. The priciest is San Francisco, CA at $3,150; the cheapest is Morgantown, WV at $2,250 (midpoints, 1,000 sq ft). Statewide, St. George is 0% below the Utah figure.

Other Utah metros

Utah metros compared with St. George
MetroSizeRangeMidpointvs. here
Salt Lake City, UT826,210 jobs$910 – $3,700$2,300level
Provo, UT304,660 jobs$910 – $3,700$2,300level
Ogden, UT271,370 jobs$900 – $3,700$2,300−1%
Logan, UT66,800 jobs$910 – $3,700$2,300level

Cities with a workforce like St. George's

Big cities and small ones price differently, so here is St. George against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Panama City, FL90,610 jobs$960 – $3,850$2,400+4%
Medford, OR89,060 jobs$1,200 – $4,650$2,900+27%
Bellingham, WA91,390 jobs$1,200 – $4,600$2,900+26%
Florence, SC89,060 jobs$960 – $3,850$2,400+4%

Why two St. George quotes can differ

  • Removing old insulation

    Old, wet or pest-damaged insulation has to come out first, at extra cost.

  • Type of insulation

    Blown-in is $0.90-$2.40 per sq ft and loose-fill is $1.00-$2.50 installed; spray foam costs more (HomeGuide).

  • Job size

    Small attics start around $500 and large ones go up to $6,000 (HomeGuide).

Pick a size, pick a tier: attic insulation pricing in St. George

Three bands are cut from the same cited range and localized for St. George wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.

Basic

$910 to $2,050

Blown-in fiberglass or cellulose to code R-value

Standard

$1,750 to $2,850

Higher R-value with air sealing around fixtures

Premium

$2,600 to $3,700

Spray foam or heavy air sealing, hard-to-reach attic

Cost by size and quality level
SizeBasicStandardPremium
small attic (600 sq ft)$540 – $1,200$1,050 – $1,700$1,550 – $2,200
average attic (1,000 sq ft)$910 – $2,050$1,750 – $2,850$2,600 – $3,700
large attic (1,800 sq ft)$1,650 – $3,650$3,150 – $5,150$4,650 – $6,650

Related projects, priced for St. George

Because every project leans on different trades, St. George's wage level does not move all prices equally. Against the US midpoint, window replacement runs −7% and vinyl siding −10%.

Related projects with local prices
ProjectSizeRangevs. US
Roof replacement2,000 sq ft of roof$5,650 – $11,700−7%
Metal roof2,000 sq ft of roof$9,150 – $30,000−8%
Vinyl siding2,100 sq ft of wall$7,550 – $22,700−10%
Window replacement10 windows$4,150 – $14,000−7%
Gutters160 linear ft$1,200 – $3,900−7%

Local wages behind the labor line

Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for St. George is 0.85 times the national level.

Insulation workers, floor, ceiling and wall (47-2131) carry 80% of the labor weighting. BLS does not publish this trade for the St. George metro, so we used the Utah statewide median: $19.27 an hour against $23.62 for the US. The middle half of them earn between $17.44 and $24.06 an hour.

Construction laborers (47-2061), 20% of the weighting: a median of $21.96 an hour, 3% below the US median of $22.66. The middle half of them earn between $18.37 and $23.78 an hour. About 1,500 work in the metro. That is 165.7 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.

Quotes come from real crews, not medians. If the insulation workers, floor, ceiling and wall on your job are paid at the 75th percentile ($24.06 an hour) instead of the median, the labor line grows by about $150. At the 25th percentile ($17.44) it shrinks by about $55. The total moves by 6.3% or 2.4%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 90,500 jobs in the St. George area. That makes it the 219th largest of the 300 metros we cover, with 0.06% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Insulation workers, floor, ceiling and wall (47-2131)80%$17.44$19.27$24.06$23.620.82state
Construction laborers (47-2061)20%$18.37$21.96$23.78$22.660.97metro
Blended100%0.85

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,750 to $2,850 for St. George, UT is attached.

Detailed attic insulation report for St. George, UT, $9

Multi-page report for St. George, UT: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Attic insulation in St. George: your questions

+How much does it cost to insulate an attic in St. George?

For 1,000 sq ft, expect $910 to $3,700 in the St. George area. A standard-spec job lands at $1,750 to $2,850. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for attic insulation in St. George?

About $0.90 to $3.70 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $1 to $4.

+Is attic insulation cheaper in St. George or Lake Havasu City?

Lake Havasu City is 110 miles away. The midpoint for 1,000 sq ft there is $2,250, which is 3% less than St. George ($2,300). Wage and materials indexes both feed that gap.

+How much of the bill is labor in St. George?

About 33% at the midpoint, or $760 out of $2,300. Materials are 67% and permits 0%. Nationally, labor is 36%.

+What would average attic (1,000 sq ft) cost in St. George?

$910 to $3,700. Pick a different size in the estimator above to get your own number.

+Does attic insulation need a permit in St. George?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the St. George area (our national range of $0 to $0 scaled by the local price level).

+Is St. George expensive for attic insulation compared with the rest of Utah?

St. George is 0% below the Utah statewide estimate ($2,300 at the midpoint). We cover 5 metros in Utah; see the state page to compare them.

+What do insulation workers, floor, ceiling and wall earn in St. George?

BLS has no published metro figure here, so we use the statewide median of $19.27 an hour, compared with $23.62 nationally. The 25th to 75th percentile range is $17.44 to $24.06.

+What do basic and premium attic insulation work cost in St. George?

For 1,000 sq ft, basic work runs $910 to $2,050 and premium work $2,600 to $3,700. Basic means: blown-in fiberglass or cellulose to code R-value. Premium means: spray foam or heavy air sealing, hard-to-reach attic.

Attic insulation near St. George

Attic insulation: all pricesAttic insulation in UtahAll projects in St. GeorgeUtah cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's $0.50-$1.30 per sq ft insulation labor, matched low-to-low and high-to-high.