Skip to content
CostLocal

Attic insulation cost in Fayetteville, NC

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (1,000 sq ft)
$930 – $3,750
Per sq ft
$0.95 – $3.75
before permit
Versus US midpoint
−6%
US $2,500
Rank of 300 metros
#261
1 = most expensive

Local price for attic insulation in the Fayetteville area: $930 to $3,750 for 1,000 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 6% lower than the US figure. Insulation workers, floor, ceiling and wall earn a median of $20.67 an hour in the Fayetteville area, 12% below the US median of $23.62.

Estimate your attic insulation cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Higher R-value with air sealing around fixtures

Estimated cost for 1,000 sq ft in Fayetteville, NC, standard level

$1,800 to $2,900

About $1.80 to $2.90 per sq ft before permits. Labor is about 34% of the bill.

Cost breakdown
PartLowHigh
Materials$1,100$1,950
Labor$660$940
Permits and fees$0$0
Total$1,800$2,900
Save and get a PDF report

Cost breakdown for 1,000 sq ft in Fayetteville, NC

Part of the jobLowMidpointHighShare
Materials$480$1,550$2,60066%
Labor$440$800$1,15034%
Permits and fees$0$0$00%
Total$930$2,350$3,750100%

Where the Fayetteville price comes from

We price the labor side from BLS wage data for 2 trades: insulation workers, floor, ceiling and wall at 80%, construction laborers at 20%. Weighted together, Fayetteville wages are 0.89 times the national level. Labor makes up about 34% of the midpoint estimate (36% at national prices). BLS does not publish this trade for the metro, so we used the North Carolina statewide median.

Materials are scaled with BEA's regional price parity for goods. Fayetteville is at 96.6 against 100 for the US, so a materials line of $1,600 nationally becomes $1,550 here (midpoint, 1,000 sq ft). Permits follow the all-items index of 92.0: $0 to $0.

Data note: 80% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Fayetteville. The wage table below marks each row.

Related projects, priced for Fayetteville

Jobs that often go together with attic insulation are priced below at their usual sizes, using the same Fayetteville wage and price inputs. Compared with national midpoints, window replacement comes out highest (−8%) and vinyl siding lowest (−11%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Roof replacement2,000 sq ft of roof$5,550 – $11,500−8%
Metal roof2,000 sq ft of roof$8,950 – $29,700−9%
Vinyl siding2,100 sq ft of wall$7,500 – $22,500−11%
Window replacement10 windows$4,100 – $13,900−8%
Gutters160 linear ft$1,150 – $3,850−8%

How Fayetteville compares

Of the five closest metros, 2 are cheaper than Fayetteville. Wilmington is the lowest at about $2,250 (midpoint, 1,000 sq ft), 75 miles away.

Comparison with nearby areas
AreaRangeMidpointvs. here
Fayetteville, NCthis page$930 – $3,750$2,350
Raleigh, NC60 miles$950 – $3,850$2,400+2%
Durham, NC65 miles$930 – $3,800$2,350level
Burlington, NC75 miles$920 – $3,750$2,350level
Wilmington, NC75 miles$890 – $3,650$2,250−3%
Florence, SC75 miles$960 – $3,850$2,400+3%
North Carolina (statewide)$930 – $3,750$2,350level
United States$1,000 – $4,000$2,500+7%

Out of the 300 metros we cover, Fayetteville ranks #261 for the cost of this job (#1 is the most expensive). Statewide, Fayetteville is 0% below the North Carolina figure.

Elsewhere in North Carolina

North Carolina metros compared with Fayetteville
MetroSizeRangeMidpointvs. here
Charlotte, NC1,358,370 jobs$940 – $3,800$2,350+1%
Raleigh, NC743,120 jobs$950 – $3,850$2,400+2%
Greensboro, NC365,410 jobs$950 – $3,800$2,400+2%
Durham, NC344,020 jobs$930 – $3,800$2,350level
Winston, NC271,980 jobs$880 – $3,650$2,250−4%
Wilmington, NC191,280 jobs$890 – $3,650$2,250−3%

Metros of a similar size

Big cities and small ones price differently, so here is Fayetteville against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
South Bend, IN131,670 jobs$1,000 – $4,000$2,500+7%
Olympia, WA130,300 jobs$1,250 – $4,750$3,000+28%
College Station, TX134,040 jobs$940 – $3,750$2,350+1%
Waco, TX129,860 jobs$950 – $3,750$2,350+1%

Who does the work: Fayetteville trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Fayetteville the blend is 0.89.

Insulation workers, floor, ceiling and wall (47-2131) carry 80% of the labor weighting. BLS does not publish this trade for the Fayetteville metro, so we used the North Carolina statewide median: $20.67 an hour against $23.62 for the US. The middle half of them earn between $17.49 and $23.07 an hour.

For construction laborers (47-2061, weighted 20%) the local median is $21.03 an hour, which is 7% below the national $22.66. The middle half of them earn between $17.31 and $23.41 an hour. BLS counts 600 of them working in the area, 45.7 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.

A quick sensitivity check: moving the lead trade (insulation workers, floor, ceiling and wall) from the median to the 75th percentile wage adds about $75 to the midpoint estimate; the 25th percentile takes off about $95. That is a swing of roughly 4.1% to 3.1% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Fayetteville has 131,430 jobs in total (BLS, May 2025), ranking 166th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Insulation workers, floor, ceiling and wall (47-2131)80%$17.49$20.67$23.07$23.620.88state
Construction laborers (47-2061)20%$17.31$21.03$23.41$22.660.93metro
Blended100%0.89

Attic insulation: what moves the price in Fayetteville

  • Type of insulation

    Blown-in is $0.90-$2.40 per sq ft and loose-fill is $1.00-$2.50 installed; spray foam costs more (HomeGuide).

  • Job size

    Small attics start around $500 and large ones go up to $6,000 (HomeGuide).

  • Air sealing and fixture damming

    Sealing gaps and damming around recessed lights are part of what moves the price within a type.

Fayetteville: what basic, standard and premium work costs

The cited range is split into basic, standard and premium bands, then scaled to Fayetteville. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small attic (600 sq ft) to large attic (1,800 sq ft).

Basic

$930 to $2,050

Blown-in fiberglass or cellulose to code R-value

Standard

$1,800 to $2,900

Higher R-value with air sealing around fixtures

Premium

$2,650 to $3,750

Spray foam or heavy air sealing, hard-to-reach attic

Cost by size and quality level
SizeBasicStandardPremium
small attic (600 sq ft)$560 – $1,250$1,050 – $1,750$1,600 – $2,250
average attic (1,000 sq ft)$930 – $2,050$1,800 – $2,900$2,650 – $3,750
large attic (1,800 sq ft)$1,650 – $3,700$3,200 – $5,250$4,750 – $6,750

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,800 to $2,900 for Fayetteville, NC is attached.

Take this estimate with you: PDF report, $9

The report lays out the attic insulation numbers for Fayetteville, NC line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Attic insulation in Fayetteville: your questions

+How much does it cost to insulate an attic in Fayetteville?

For 1,000 sq ft, expect $930 to $3,750 in the Fayetteville area. A standard-spec job lands at $1,800 to $2,900. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for attic insulation in Fayetteville?

About $0.95 to $3.75 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $1 to $4.

+Is attic insulation cheaper in Fayetteville or Raleigh?

Raleigh is 60 miles away. The midpoint for 1,000 sq ft there is $2,400, which is 2% more than Fayetteville ($2,350). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Fayetteville?

About 34% at the midpoint, or $800 out of $2,350. Materials are 66% and permits 0%. Nationally, labor is 36%.

+What would average attic (1,000 sq ft) cost in Fayetteville?

$930 to $3,750. Pick a different size in the estimator above to get your own number.

+Does attic insulation need a permit in Fayetteville?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Fayetteville area (our national range of $0 to $0 scaled by the local price level).

+Is Fayetteville expensive for attic insulation compared with the rest of North Carolina?

Fayetteville is 0% below the North Carolina statewide estimate ($2,350 at the midpoint). We cover 11 metros in North Carolina; see the state page to compare them.

+What do insulation workers, floor, ceiling and wall earn in Fayetteville?

BLS has no published metro figure here, so we use the statewide median of $20.67 an hour, compared with $23.62 nationally. The 25th to 75th percentile range is $17.49 to $23.07.

+What do basic and premium attic insulation work cost in Fayetteville?

For 1,000 sq ft, basic work runs $930 to $2,050 and premium work $2,650 to $3,750. Basic means: blown-in fiberglass or cellulose to code R-value. Premium means: spray foam or heavy air sealing, hard-to-reach attic.

Attic insulation near Fayetteville

Attic insulation: all pricesAttic insulation in North CarolinaAll projects in FayettevilleNorth Carolina cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's $0.50-$1.30 per sq ft insulation labor, matched low-to-low and high-to-high.