Hardwood flooring cost in Greenville, SC
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (500 sq ft)
- $5,000 – $11,400
- Per sq ft
- $10 – $23
- before permit
- Versus US midpoint
- −9%
- US $9,000
- Rank of 300 metros
- #213
- 1 = most expensive
Greenville homeowners pay roughly $5,000 to $11,400 to install hardwood flooring at 500 sq ft, or $10 to $23 per sq ft (permit not included). Against the US midpoint, Greenville is 9% lower. Carpenters earn a median of $24.08 an hour in the Greenville area, 17% below the US median of $29.12.
Estimate your hardwood flooring cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 500 sq ft in Greenville, SC, standard level
$6,950 to $9,500
About $14 to $19 per sq ft before permits. Labor is about 38% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,200 | $5,900 |
| Labor | $2,750 | $3,600 |
| Permits and fees | $0 | $0 |
| Total | $6,950 | $9,500 |
Cost breakdown for 500 sq ft in Greenville, SC
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,900 | $5,050 | $7,250 | 62% |
| Labor | $2,100 | $3,150 | $4,200 | 38% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $5,000 | $8,200 | $11,400 | 100% |
Where the Greenville price comes from
The wage side of the estimate leans on carpenters, who do 70% of the hours on a typical job. Their local median is $24.08 an hour. Add the other trades involved and the blended wage index for Greenville is 0.84 (US = 1.00), which puts labor at 38% of the total.
On the materials line, the BEA goods price index for the Greenville metro is 96.3 (US = 100). The midpoint materials bill for 500 sq ft comes to $5,050, compared with $5,250 at national prices. Permit and inspection fees are scaled by the broader index (93.3) and land at $0 to $0.
Data note: 30% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Greenville. The wage table below marks each row.
Cost by quality level and size in Greenville
Three bands are cut from the same cited range and localized for Greenville wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$5,000 to $7,600
Standard solid oak, simple layout
Standard
$6,950 to $9,500
Wider planks or a better grade, some stairs
Premium
$8,850 to $11,400
Exotic species, herringbone or complex layout
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one room (200 sq ft) | $2,000 – $3,050 | $2,750 – $3,800 | $3,550 – $4,600 |
| main floor (500 sq ft) | $5,000 – $7,600 | $6,950 – $9,500 | $8,850 – $11,400 |
| whole house (1,200 sq ft) | $12,000 – $18,200 | $16,600 – $22,800 | $21,300 – $27,500 |
Specs and site conditions that change a Greenville bid
Solid versus engineered
Solid hardwood is $11-$25 per sq ft installed and engineered hardwood is $9-$20 (HomeGuide).
Materials and labor
Materials are $6-$15 per sq ft and installation labor adds $3-$10 per sq ft.
Layout
Room shape, stairs and installation method change the labor side.
Planning more than one job in Greenville?
Because every project leans on different trades, Greenville's wage level does not move all prices equally. Against the US midpoint, kitchen remodel runs −6% and bathroom remodel −12%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Laminate flooring | 500 sq ft | $1,750 – $6,350 | −10% |
| Tile flooring | 200 sq ft | $2,000 – $9,150 | −10% |
| Kitchen remodel | 120 sq ft | $17,300 – $29,500 | −6% |
| Bathroom remodel | 45 sq ft | $4,150 – $20,500 | −12% |
Greenville against nearby metros and the rest of South Carolina
Same job, same size (500 sq ft), priced for the nearest metros. Augusta is the priciest of the group at $8,550. Athens is the cheapest at $7,900.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Greenville, SCthis page | $5,000 – $11,400 | $8,200 | |
| Spartanburg, SC35 miles | $5,050 – $11,500 | $8,300 | +1% |
| Asheville, NC65 miles | $5,050 – $11,600 | $8,350 | +1% |
| Athens, GA70 miles | $4,800 – $11,000 | $7,900 | −4% |
| Gainesville, GA85 miles | $4,850 – $11,100 | $8,000 | −3% |
| Augusta, GA90 miles | $5,200 – $11,800 | $8,550 | +4% |
| South Carolina (statewide) | $5,000 – $11,500 | $8,250 | level |
| United States | $5,500 – $12,500 | $9,000 | +9% |
Across 300 US metros, Greenville comes in at #213 from the top. The priciest is Honolulu, HI at $11,500; the cheapest is Brownsville, TX at $7,300 (midpoints, 500 sq ft). Statewide, Greenville is 0% below the South Carolina figure.
Other South Carolina metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Columbia, SC | 394,200 jobs | $4,950 – $11,300 | $8,150 | −1% |
| Charleston, SC | 394,170 jobs | $5,050 – $11,500 | $8,300 | +1% |
| Spartanburg, SC | 165,150 jobs | $5,050 – $11,500 | $8,300 | +1% |
| Myrtle Beach, SC | 146,260 jobs | $4,950 – $11,300 | $8,100 | −1% |
| Florence, SC | 89,060 jobs | $5,000 – $11,400 | $8,200 | level |
| Hilton Head, SC | 81,920 jobs | $4,950 – $11,400 | $8,200 | −1% |
Cities with a workforce like Greenville's
Big cities and small ones price differently, so here is Greenville against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| New Orleans, LA | 445,550 jobs | $4,800 – $11,000 | $7,950 | −4% |
| Knoxville, TN | 424,600 jobs | $5,050 – $11,500 | $8,250 | level |
| Honolulu, HI | 446,380 jobs | $7,100 – $15,900 | $11,500 | +40% |
| Baton Rouge, LA | 409,690 jobs | $5,000 – $11,400 | $8,150 | −1% |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Greenville is 0.84 times the national level.
For carpenters (47-2031, weighted 70%) the local median is $24.08 an hour, which is 17% below the national $29.12. The middle half of them earn between $21.49 and $29.52 an hour. BLS counts 1,340 of them working in the area, 30.8 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Floor layers (except carpet, wood and hard tiles) (47-2042) carry 30% of the labor weighting. BLS does not publish this trade for the Greenville metro, so we used the South Carolina statewide median: $23.97 an hour against $27.15 for the US. The middle half of them earn between $20.49 and $26.23 an hour.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($29.52 an hour) instead of the median, the labor line grows by about $490. At the 25th percentile ($21.49) it shrinks by about $230. The total moves by 6.0% or 2.8%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 434,900 jobs in the Greenville-Anderson-Greer area. That makes it the 58th largest of the 300 metros we cover, with 0.28% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 70% | $21.49 | $24.08 | $29.52 | $29.12 | 0.83 | metro |
| Floor layers (except carpet, wood and hard tiles) (47-2042) | 30% | $20.49 | $23.97 | $26.23 | $27.15 | 0.88 | state |
| Blended | 100% | 0.84 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,950 to $9,500 for Greenville, SC is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Greenville, SC: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Hardwood flooring in Greenville: your questions
+How much does it cost to install hardwood flooring in Greenville?
For 500 sq ft, expect $5,000 to $11,400 in the Greenville area. A standard-spec job lands at $6,950 to $9,500. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for hardwood floor in Greenville?
About $10 to $23 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $11 to $25.
+Is hardwood floor cheaper in Greenville or Spartanburg?
Spartanburg is 35 miles away. The midpoint for 500 sq ft there is $8,300, which is 1% more than Greenville ($8,200). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Greenville?
About 38% at the midpoint, or $3,150 out of $8,200. Materials are 62% and permits 0%. Nationally, labor is 42%.
+What would main floor (500 sq ft) cost in Greenville?
$5,000 to $11,400. Pick a different size in the estimator above to get your own number.
+Does hardwood floor need a permit in Greenville?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Greenville area (our national range of $0 to $0 scaled by the local price level).
+Is Greenville expensive for hardwood floor compared with the rest of South Carolina?
Greenville is 0% below the South Carolina statewide estimate ($8,250 at the midpoint). We cover 7 metros in South Carolina; see the state page to compare them.
+What do carpenters earn in Greenville?
The BLS median is $24.08 an hour in the Greenville area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.49 to $29.52.
+What do basic and premium hardwood floor work cost in Greenville?
For 500 sq ft, basic work runs $5,000 to $7,600 and premium work $8,850 to $11,400. Basic means: standard solid oak, simple layout. Premium means: exotic species, herringbone or complex layout.
Hardwood flooring near Greenville
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.