Hardwood flooring cost in Macon, GA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (500 sq ft)
- $4,700 – $10,900
- Per sq ft
- $9.40 – $21.50
- before permit
- Versus US midpoint
- −14%
- US $9,000
- Rank of 300 metros
- #286
- 1 = most expensive
Local price for a hardwood floor in the Macon area: $4,700 to $10,900 for 500 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 14% lower than the US figure. Carpenters earn a median of $20.03 an hour in the Macon area, 31% below the US median of $29.12.
Estimate your hardwood flooring cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 500 sq ft in Macon, GA, standard level
$6,550 to $9,000
About $13 to $18 per sq ft before permits. Labor is about 35% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,200 | $5,900 |
| Labor | $2,350 | $3,100 |
| Permits and fees | $0 | $0 |
| Total | $6,550 | $9,000 |
Cost breakdown for 500 sq ft in Macon, GA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,900 | $5,050 | $7,200 | 65% |
| Labor | $1,800 | $2,700 | $3,650 | 35% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $4,700 | $7,800 | $10,900 | 100% |
What is behind the Macon number
We price the labor side from BLS wage data for 2 trades: carpenters at 70%, floor layers (except carpet, wood and hard tiles) at 30%. Weighted together, Macon wages are 0.73 times the national level. Labor makes up about 35% of the midpoint estimate (42% at national prices).
Materials are scaled with BEA's regional price parity for goods. Macon is at 96.3 against 100 for the US, so a materials line of $5,250 nationally becomes $5,050 here (midpoint, 500 sq ft). Permits follow the all-items index of 88.5: $0 to $0.
Data note: 30% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Macon. The wage table below marks each row.
Related projects, priced for Macon
Jobs that often go together with hardwood floor are priced below at their usual sizes, using the same Macon wage and price inputs. Compared with national midpoints, kitchen remodel comes out highest (−8%) and laminate flooring lowest (−16%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Laminate flooring | 500 sq ft | $1,650 – $5,950 | −16% |
| Tile flooring | 200 sq ft | $2,100 – $9,300 | −8% |
| Kitchen remodel | 120 sq ft | $17,100 – $29,100 | −8% |
| Bathroom remodel | 45 sq ft | $4,150 – $20,600 | −12% |
Is Macon cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 500 sq ft range from $7,650 to $8,400 across Macon and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Macon, GAthis page | $4,700 – $10,900 | $7,800 | |
| Warner Robins, GA25 miles | $4,850 – $11,100 | $8,000 | +3% |
| Atlanta, GA70 miles | $5,100 – $11,700 | $8,400 | +8% |
| Columbus, GA70 miles | $4,800 – $11,100 | $7,950 | +2% |
| Athens, GA80 miles | $4,800 – $11,000 | $7,900 | +2% |
| Albany, GA85 miles | $4,600 – $10,700 | $7,650 | −2% |
| Georgia (statewide) | $5,000 – $11,500 | $8,250 | +6% |
| United States | $5,500 – $12,500 | $9,000 | +16% |
Out of the 300 metros we cover, Macon ranks #286 for the cost of this job (#1 is the most expensive). Statewide, Macon is 6% below the Georgia figure.
Elsewhere in Georgia
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Atlanta, GA | 2,889,670 jobs | $5,100 – $11,700 | $8,400 | +8% |
| Augusta, GA | 231,930 jobs | $5,200 – $11,800 | $8,550 | +10% |
| Savannah, GA | 198,360 jobs | $4,800 – $11,000 | $7,900 | +2% |
| Columbus, GA | 116,380 jobs | $4,800 – $11,100 | $7,950 | +2% |
| Gainesville, GA | 103,870 jobs | $4,850 – $11,100 | $8,000 | +3% |
| Athens, GA | 95,800 jobs | $4,800 – $11,000 | $7,900 | +2% |
Metros of a similar size
Big cities and small ones price differently, so here is Macon against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Fort Smith, AR | 95,560 jobs | $4,550 – $10,600 | $7,550 | −3% |
| Barnstable, MA | 94,110 jobs | $6,000 – $13,500 | $9,750 | +25% |
| Athens, GA | 95,800 jobs | $4,800 – $11,000 | $7,900 | +2% |
| Billings, MT | 93,800 jobs | $5,100 – $11,600 | $8,350 | +7% |
Why two Macon quotes can differ
Permit
Flooring rarely needs a permit, so no permit fee is included in this estimate.
Solid versus engineered
Solid hardwood is $11-$25 per sq ft installed and engineered hardwood is $9-$20 (HomeGuide).
Materials and labor
Materials are $6-$15 per sq ft and installation labor adds $3-$10 per sq ft.
Who does the work: Macon trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Macon the blend is 0.73.
Carpenters (47-2031), 70% of the weighting: a median of $20.03 an hour, 31% below the US median of $29.12. The middle half of them earn between $16.47 and $27.05 an hour. About 70 work in the metro. That is 7.4 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
Floor layers (except carpet, wood and hard tiles) (47-2042) carry 30% of the labor weighting. BLS does not publish this trade for the Macon metro, so we used the Georgia statewide median: $22.13 an hour against $27.15 for the US. The middle half of them earn between $19.77 and $28.58 an hour.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $630 to the midpoint estimate; the 25th percentile takes off about $320. That is a swing of roughly 4.1% to 8.1% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Macon-Bibb County has 95,030 jobs in total (BLS, May 2025), ranking 211th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 70% | $16.47 | $20.03 | $27.05 | $29.12 | 0.69 | metro |
| Floor layers (except carpet, wood and hard tiles) (47-2042) | 30% | $19.77 | $22.13 | $28.58 | $27.15 | 0.82 | state |
| Blended | 100% | 0.73 | |||||
Pick a size, pick a tier: hardwood flooring pricing in Macon
The cited range is split into basic, standard and premium bands, then scaled to Macon. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one room (200 sq ft) to whole house (1,200 sq ft).
Basic
$4,700 to $7,150
Standard solid oak, simple layout
Standard
$6,550 to $9,000
Wider planks or a better grade, some stairs
Premium
$8,400 to $10,900
Exotic species, herringbone or complex layout
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one room (200 sq ft) | $1,900 – $2,850 | $2,600 – $3,600 | $3,350 – $4,350 |
| main floor (500 sq ft) | $4,700 – $7,150 | $6,550 – $9,000 | $8,400 – $10,900 |
| whole house (1,200 sq ft) | $11,300 – $17,200 | $15,700 – $21,600 | $20,100 – $26,000 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,550 to $9,000 for Macon, GA is attached.
Detailed hardwood flooring report for Macon, GA, $9
Multi-page report for Macon, GA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Hardwood flooring in Macon: your questions
+How much does it cost to install hardwood flooring in Macon?
For 500 sq ft, expect $4,700 to $10,900 in the Macon area. A standard-spec job lands at $6,550 to $9,000. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for hardwood floor in Macon?
About $9.40 to $21.50 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $11 to $25.
+Is hardwood floor cheaper in Macon or Warner Robins?
Warner Robins is 25 miles away. The midpoint for 500 sq ft there is $8,000, which is 3% more than Macon ($7,800). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Macon?
About 35% at the midpoint, or $2,700 out of $7,800. Materials are 65% and permits 0%. Nationally, labor is 42%.
+What would main floor (500 sq ft) cost in Macon?
$4,700 to $10,900. Pick a different size in the estimator above to get your own number.
+Does hardwood floor need a permit in Macon?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Macon area (our national range of $0 to $0 scaled by the local price level).
+Is Macon expensive for hardwood floor compared with the rest of Georgia?
Macon is 6% below the Georgia statewide estimate ($8,250 at the midpoint). We cover 10 metros in Georgia; see the state page to compare them.
+What do carpenters earn in Macon?
The BLS median is $20.03 an hour in the Macon area, compared with $29.12 nationally. The 25th to 75th percentile range is $16.47 to $27.05.
+What do basic and premium hardwood floor work cost in Macon?
For 500 sq ft, basic work runs $4,700 to $7,150 and premium work $8,400 to $10,900. Basic means: standard solid oak, simple layout. Premium means: exotic species, herringbone or complex layout.
Hardwood flooring near Macon
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.