Front door cost in Hagerstown, MD
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 door)
- $470 – $2,400
- Per door
- $474 – $2,397
- before permit
- Versus US midpoint
- −4%
- US $1,500
- Rank of 300 metros
- #140
- 1 = most expensive
Local price for a new front door in the Hagerstown area: $470 to $2,400 for 1 door. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 4% lower than the US figure. Building materials run about 4% below the US average here (BEA goods price index 96.4).
Estimate your front door cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 door in Hagerstown, MD, standard level
$1,050 to $1,800
About $1,051 to $1,820 per door before permits. Labor is about 26% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $710 | $1,400 |
| Labor | $340 | $410 |
| Permits and fees | $0 | $0 |
| Total | $1,050 | $1,800 |
Cost breakdown for 1 door in Hagerstown, MD
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $190 | $1,050 | $1,950 | 74% |
| Labor | $280 | $380 | $470 | 26% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $470 | $1,450 | $2,400 | 100% |
Where the Hagerstown price comes from
We price the labor side from BLS wage data for 2 trades: carpenters at 85%, general maintenance and repair workers at 15%. Weighted together, Hagerstown wages are 0.94 times the national level. Labor makes up about 26% of the midpoint estimate (27% at national prices).
Materials are scaled with BEA's regional price parity for goods. Hagerstown is at 96.4 against 100 for the US, so a materials line of $1,100 nationally becomes $1,050 here (midpoint, 1 door). Permits follow the all-items index of 94.2: $0 to $0.
The best months for front door in Hagerstown
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Hagerstown 1 E (in the city). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Hagerstown are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Hagerstown gets about 44 inches of precipitation in a normal year. The wettest months are March, May and September (4.8 inches in September). Inside the workable window, October and November are the driest, at 3.4 and 2.9 inches. The station averages about 32 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 40 | 22 | 3.2 | Cold |
| Feb | 44 | 25 | 2.7 | Cold |
| Mar | 53 | 32 | 3.9 | Workable |
| Apr | 65 | 41 | 3.9 | Workable |
| May | 74 | 53 | 4.3 | Workable |
| Jun | 83 | 62 | 3.4 | Workable |
| Jul | 86 | 66 | 3.7 | Workable |
| Aug | 85 | 65 | 3.7 | Workable |
| Sep | 78 | 56 | 4.8 | Workable |
| Oct | 66 | 45 | 3.4 | Workable |
| Nov | 54 | 34 | 2.9 | Workable |
| Dec | 44 | 27 | 3.7 | Cold |
Specs and site conditions that change a Hagerstown bid
Frame
Frame repair adds $75-$200+; rebuilding the opening for a new size costs $7-$20 per linear foot for framing.
Paint
Painting an unfinished door adds $125-$225; door and trim together are $150-$400.
Door material
Basic steel doors run about $200-$600 for the door; fiberglass and wood go to $2,000 (HomeGuide).
Who does the work: Hagerstown trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Hagerstown the blend is 0.94.
Carpenters (47-2031), 85% of the weighting: a median of $27.21 an hour, 7% below the US median of $29.12. The middle half of them earn between $21.25 and $29.80 an hour. About 350 work in the metro. That is 32.7 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For general maintenance and repair workers (49-9071, weighted 15%) the local median is $22.94 an hour, which is 4% below the national $23.84. The middle half of them earn between $17.77 and $29.15 an hour. BLS counts 1,060 of them working in the area, 98.9 for every 10,000 jobs (US: 98.4), so the local bench is about average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $30 to the midpoint estimate; the 25th percentile takes off about $70. That is a swing of roughly 4.8% to 2.1% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Hagerstown-Martinsburg has 107,170 jobs in total (BLS, May 2025), ranking 195th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 85% | $21.25 | $27.21 | $29.80 | $29.12 | 0.93 | metro |
| General maintenance and repair workers (49-9071) | 15% | $17.77 | $22.94 | $29.15 | $23.84 | 0.96 | metro |
| Blended | 100% | 0.94 | |||||
Is Hagerstown cheap or dear? The local comparison
Of the five closest metros, 1 is cheaper than Hagerstown. Winchester is the lowest at about $1,400 (midpoint, 1 door), 30 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Hagerstown, MDthis page | $470 – $2,400 | $1,450 | |
| Chambersburg, PA30 miles | $460 – $2,450 | $1,450 | +1% |
| Winchester, VA30 miles | $450 – $2,350 | $1,400 | −2% |
| Washington, DC55 miles | $520 – $2,600 | $1,550 | +9% |
| Altoona, PA65 miles | $480 – $2,500 | $1,500 | +3% |
| York, PA70 miles | $510 – $2,500 | $1,500 | +6% |
| Maryland (statewide) | $520 – $2,550 | $1,550 | +7% |
| United States | $500 – $2,500 | $1,500 | +4% |
Out of the 300 metros we cover, Hagerstown ranks #140 for the cost of this job (#1 is the most expensive). Statewide, Hagerstown is 7% below the Maryland figure.
Elsewhere in Maryland
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Baltimore, MD | 1,356,680 jobs | $510 – $2,550 | $1,550 | +7% |
| Lexington Park, MD | 70,650 jobs | $510 – $2,500 | $1,500 | +5% |
Metros of a similar size
Big cities and small ones price differently, so here is Hagerstown against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Columbia, MO | 107,680 jobs | $470 – $2,350 | $1,400 | −2% |
| Champaign, IL | 105,500 jobs | $520 – $2,450 | $1,450 | +3% |
| Bend, OR | 108,240 jobs | $520 – $2,600 | $1,550 | +9% |
| St. Cloud, MN | 103,920 jobs | $500 – $2,400 | $1,450 | +2% |
What nearby projects cost in Hagerstown
Jobs that often go together with front door are priced below at their usual sizes, using the same Hagerstown wage and price inputs. Compared with national midpoints, window replacement comes out highest (−4%) and storm door lowest (−5%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Storm door | 1 door | $330 – $910 | −5% |
| Patio door | 1 door | $580 – $5,750 | −4% |
| Window replacement | 10 windows | $4,300 – $14,400 | −4% |
| Garage door | 1 door | $670 – $3,550 | −4% |
Hagerstown: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Hagerstown. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from single entry door to front and side doors.
Basic
$470 to $1,250
Basic steel door, same size opening
Standard
$1,050 to $1,800
Fiberglass door with sidelight trim or glass
Premium
$1,650 to $2,400
Wood or custom door, frame work needed
| Size | Basic | Standard | Premium |
|---|---|---|---|
| single entry door | $470 – $1,250 | $1,050 – $1,800 | $1,650 – $2,400 |
| front and side doors | $950 – $2,500 | $2,100 – $3,650 | $3,250 – $4,800 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,050 to $1,800 for Hagerstown, MD is attached.
A detailed PDF report of this estimate, $9
The report lays out the front door numbers for Hagerstown, MD line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Front door in Hagerstown: your questions
+How much does it cost to replace a front door in Hagerstown?
For 1 door, expect $470 to $2,400 in the Hagerstown area. A standard-spec job lands at $1,050 to $1,800. Small jobs usually cost more per door and large ones less.
+What is the price per door for front door in Hagerstown?
About $474 to $2,397 per door for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $500 to $2,500.
+Is front door cheaper in Hagerstown or Chambersburg?
Chambersburg is 30 miles away. The midpoint for 1 door there is $1,450, which is 1% more than Hagerstown ($1,450). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Hagerstown?
About 26% at the midpoint, or $380 out of $1,450. Materials are 74% and permits 0%. Nationally, labor is 27%.
+What would front and side doors cost in Hagerstown?
$950 to $4,800. Pick a different size in the estimator above to get your own number.
+Does front door need a permit in Hagerstown?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Hagerstown area (our national range of $0 to $0 scaled by the local price level).
+Is Hagerstown expensive for front door compared with the rest of Maryland?
Hagerstown is 7% below the Maryland statewide estimate ($1,550 at the midpoint). We cover 3 metros in Maryland; see the state page to compare them.
+What do carpenters earn in Hagerstown?
The BLS median is $27.21 an hour in the Hagerstown area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.25 to $29.80.
+What do basic and premium front door work cost in Hagerstown?
For 1 door, basic work runs $470 to $1,250 and premium work $1,650 to $2,400. Basic means: basic steel door, same size opening. Premium means: wood or custom door, frame work needed.
+When is the best time to replace a front door in Hagerstown?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. October and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Front door near Hagerstown
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Front Door Replacement Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = HomeGuide's door prices, from about $200 for a basic steel door to $2,000 for higher-end fiberglass or wood.