Front door cost in Bridgeport, CT
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 door)
- $510 – $2,500
- Per door
- $513 – $2,477
- before permit
- Versus US midpoint
- Level
- US $1,500
- Rank of 300 metros
- #76
- 1 = most expensive
Local price for a new front door in the Bridgeport area: $510 to $2,500 for 1 door. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Building materials run about 3% below the US average here (BEA goods price index 97.3).
Estimate your front door cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 door in Bridgeport, CT, standard level
$1,100 to $1,900
About $1,102 to $1,888 per door before permits. Labor is about 28% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $720 | $1,400 |
| Labor | $380 | $470 |
| Permits and fees | $0 | $0 |
| Total | $1,100 | $1,900 |
Cost breakdown for 1 door in Bridgeport, CT
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $190 | $1,050 | $1,950 | 72% |
| Labor | $320 | $420 | $530 | 28% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $510 | $1,500 | $2,500 | 100% |
Why Bridgeport prices look the way they do
We price the labor side from BLS wage data for 2 trades: carpenters at 85%, general maintenance and repair workers at 15%. Weighted together, Bridgeport wages are 1.06 times the national level. Labor makes up about 28% of the midpoint estimate (27% at national prices).
Materials are scaled with BEA's regional price parity for goods. Bridgeport is at 97.3 against 100 for the US, so a materials line of $1,100 nationally becomes $1,050 here (midpoint, 1 door). Permits follow the all-items index of 106.9: $0 to $0.
Planning more than one job in Bridgeport?
Jobs that often go together with front door are priced below at their usual sizes, using the same Bridgeport wage and price inputs. Compared with national midpoints, patio door comes out highest (+3%) and window replacement lowest (+1%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Storm door | 1 door | $360 – $960 | +1% |
| Patio door | 1 door | $610 – $6,150 | +3% |
| Window replacement | 10 windows | $4,550 – $15,100 | +1% |
| Garage door | 1 door | $720 – $3,750 | +2% |
Is Bridgeport cheap or dear? The local comparison
Same job, same size (1 door), priced for the nearest metros. New York is the priciest of the group at $1,700. Waterbury is the cheapest at $1,500.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Bridgeport, CTthis page | $510 – $2,500 | $1,500 | |
| Waterbury, CT25 miles | $500 – $2,450 | $1,500 | −1% |
| New Haven, CT30 miles | $520 – $2,500 | $1,500 | +1% |
| Poughkeepsie, NY40 miles | $540 – $2,750 | $1,650 | +9% |
| New York, NY40 miles | $590 – $2,800 | $1,700 | +14% |
| Hartford, CT55 miles | $520 – $2,500 | $1,500 | +1% |
| Connecticut (statewide) | $520 – $2,500 | $1,500 | level |
| United States | $500 – $2,500 | $1,500 | level |
Out of the 300 metros we cover, Bridgeport ranks #76 for the cost of this job (#1 is the most expensive). Statewide, Bridgeport is 0% below the Connecticut figure.
Elsewhere in Connecticut
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Hartford, CT | 599,770 jobs | $520 – $2,500 | $1,500 | +1% |
| New Haven, CT | 281,410 jobs | $520 – $2,500 | $1,500 | +1% |
| Waterbury, CT | 160,710 jobs | $500 – $2,450 | $1,500 | −1% |
| Norwich, CT | 126,450 jobs | $510 – $2,500 | $1,500 | level |
Metros of a similar size
Big cities and small ones price differently, so here is Bridgeport against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Albuquerque, NM | 404,700 jobs | $490 – $2,400 | $1,450 | −3% |
| Des Moines, IA | 404,130 jobs | $490 – $2,400 | $1,450 | −4% |
| Madison, WI | 408,070 jobs | $510 – $2,400 | $1,450 | −3% |
| Columbia, SC | 394,200 jobs | $440 – $2,350 | $1,400 | −7% |
Who does the work: Bridgeport trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Bridgeport the blend is 1.06.
Carpenters (47-2031), 85% of the weighting: a median of $30.39 an hour, 4% above the US median of $29.12. The middle half of them earn between $27.19 and $37.89 an hour. About 1,100 work in the metro. That is 27.2 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For general maintenance and repair workers (49-9071, weighted 15%) the local median is $27.64 an hour, which is 16% above the national $23.84. The middle half of them earn between $21.65 and $33.70 an hour. BLS counts 2,410 of them working in the area, 59.6 for every 10,000 jobs (US: 98.4), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $90 to the midpoint estimate; the 25th percentile takes off about $35. That is a swing of roughly 2.5% to 5.9% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Bridgeport-Stamford-Danbury has 404,180 jobs in total (BLS, May 2025), ranking 63rd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 85% | $27.19 | $30.39 | $37.89 | $29.12 | 1.04 | metro |
| General maintenance and repair workers (49-9071) | 15% | $21.65 | $27.64 | $33.70 | $23.84 | 1.16 | metro |
| Blended | 100% | 1.06 | |||||
Why two Bridgeport quotes can differ
Door material
Basic steel doors run about $200-$600 for the door; fiberglass and wood go to $2,000 (HomeGuide).
Double doors
A double front door costs $1,500-$6,500+ installed; the doors alone are $1,200-$5,000.
Frame
Frame repair adds $75-$200+; rebuilding the opening for a new size costs $7-$20 per linear foot for framing.
The best months for front door in Bridgeport
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Bridgeport Sikorsky Mem Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Bridgeport are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Bridgeport gets about 44 inches of precipitation in a normal year, including roughly 34 inches of snow. The wettest months are March, April and August (4.2 inches in April). Inside the workable window, July and November are the driest, at 3.3 and 3.1 inches. The station averages about 9 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 38 | 24 | 3.2 | Cold |
| Feb | 41 | 26 | 3.1 | Cold |
| Mar | 47 | 32 | 4.1 | Workable |
| Apr | 58 | 42 | 4.2 | Workable |
| May | 68 | 52 | 3.6 | Workable |
| Jun | 78 | 62 | 3.8 | Workable |
| Jul | 83 | 68 | 3.3 | Workable |
| Aug | 82 | 67 | 4.0 | Workable |
| Sep | 75 | 60 | 4.0 | Workable |
| Oct | 64 | 48 | 3.8 | Workable |
| Nov | 54 | 38 | 3.1 | Workable |
| Dec | 44 | 30 | 4.0 | Cold |
Bridgeport: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Bridgeport. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from single entry door to front and side doors.
Basic
$510 to $1,300
Basic steel door, same size opening
Standard
$1,100 to $1,900
Fiberglass door with sidelight trim or glass
Premium
$1,700 to $2,500
Wood or custom door, frame work needed
| Size | Basic | Standard | Premium |
|---|---|---|---|
| single entry door | $510 – $1,300 | $1,100 – $1,900 | $1,700 – $2,500 |
| front and side doors | $1,050 – $2,600 | $2,200 – $3,800 | $3,400 – $4,950 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,100 to $1,900 for Bridgeport, CT is attached.
A detailed PDF report of this estimate, $9
The report lays out the front door numbers for Bridgeport, CT line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Front door in Bridgeport: your questions
+How much does it cost to replace a front door in Bridgeport?
For 1 door, expect $510 to $2,500 in the Bridgeport area. A standard-spec job lands at $1,100 to $1,900. Small jobs usually cost more per door and large ones less.
+What is the price per door for front door in Bridgeport?
About $513 to $2,477 per door for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $500 to $2,500.
+Is front door cheaper in Bridgeport or Waterbury?
Waterbury is 25 miles away. The midpoint for 1 door there is $1,500, which is 1% less than Bridgeport ($1,500). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Bridgeport?
About 28% at the midpoint, or $420 out of $1,500. Materials are 72% and permits 0%. Nationally, labor is 27%.
+What would front and side doors cost in Bridgeport?
$1,050 to $4,950. Pick a different size in the estimator above to get your own number.
+Does front door need a permit in Bridgeport?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Bridgeport area (our national range of $0 to $0 scaled by the local price level).
+Is Bridgeport expensive for front door compared with the rest of Connecticut?
Bridgeport is 0% below the Connecticut statewide estimate ($1,500 at the midpoint). We cover 5 metros in Connecticut; see the state page to compare them.
+What do carpenters earn in Bridgeport?
The BLS median is $30.39 an hour in the Bridgeport area, compared with $29.12 nationally. The 25th to 75th percentile range is $27.19 to $37.89.
+What do basic and premium front door work cost in Bridgeport?
For 1 door, basic work runs $510 to $1,300 and premium work $1,700 to $2,500. Basic means: basic steel door, same size opening. Premium means: wood or custom door, frame work needed.
+When is the best time to replace a front door in Bridgeport?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. July and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Front door near Bridgeport
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Front Door Replacement Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = HomeGuide's door prices, from about $200 for a basic steel door to $2,000 for higher-end fiberglass or wood.