French drain cost in Racine, WI
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (60 linear ft)
- $700 – $2,450
- Per linear ft
- $11.50 – $41
- before permit
- Versus US midpoint
- +17%
- US $1,350
- Rank of 300 metros
- #36
- 1 = most expensive
Local price for a French drain in the Racine area: $700 to $2,450 for 60 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 17% higher than the US figure. Construction laborers earn a median of $26.11 an hour in the Racine area, 15% above the US median of $22.66.
Estimate your french drain cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 60 linear ft in Racine, WI, standard level
$1,250 to $1,950
About $20.50 to $32 per linear ft before permits. Labor is about 62% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $470 | $740 |
| Labor | $760 | $1,200 |
| Permits and fees | $0 | $0 |
| Total | $1,250 | $1,950 |
Cost breakdown for 60 linear ft in Racine, WI
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $270 | $610 | $950 | 38% |
| Labor | $430 | $970 | $1,500 | 62% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $700 | $1,600 | $2,450 | 100% |
Why Racine prices look the way they do
Labor is 62% of the midpoint bill here, against 52% nationally. The mix of trades behind this job is construction laborers (50%), operating engineers and other construction equipment operators (30%), pipelayers (20%). We weight each trade's local median wage by that share and compare it with the national median. In Racine the blended ratio comes out at 1.38.
Materials are scaled with BEA's regional price parity for goods. Racine is at 93.8 against 100 for the US, so a materials line of $650 nationally becomes $610 here (midpoint, 60 linear ft). Permits follow the all-items index of 96.0: $0 to $0.
Data note: 20% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Racine. The wage table below marks each row.
Specs and site conditions that change a Racine bid
Crawl space drains
A crawl space French drain is $2,000-$8,000 installed.
Exterior versus interior
A shallow exterior French drain is $10-$35 per linear foot; an interior basement drain is $40-$85 per foot, or $4,000-$17,000 installed (HomeGuide).
Where the water goes
A sump pump adds $500-$1,800 and a dry well $50-$3,000+. Discharging to a storm drain can mean extra permit fees.
Cost by quality level and size in Racine
The cited range is split into basic, standard and premium bands, then scaled to Racine. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from short run (30 linear ft) to long run (120 linear ft).
Basic
$700 to $1,400
Shallow yard drain, easy digging
Standard
$1,250 to $1,950
Standard drain with fabric, gravel and a pop-up outlet
Premium
$1,750 to $2,450
Deep or long drain, hard soil, dry well or sump discharge
| Size | Basic | Standard | Premium |
|---|---|---|---|
| short run (30 linear ft) | $350 – $700 | $610 – $960 | $880 – $1,250 |
| side yard (60 linear ft) | $700 – $1,400 | $1,250 – $1,950 | $1,750 – $2,450 |
| long run (120 linear ft) | $1,400 – $2,800 | $2,450 – $3,850 | $3,500 – $4,900 |
Who does the work: Racine trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Racine the blend is 1.38.
For construction laborers (47-2061, weighted 50%) the local median is $26.11 an hour, which is 15% above the national $22.66. The middle half of them earn between $21.83 and $33.66 an hour. BLS counts 540 of them working in the area, 70.8 for every 10,000 jobs (US: 70.5), so the local bench is about average.
Operating engineers and other construction equipment operators (47-2073), 30% of the weighting: a median of $43.43 an hour, 51% above the US median of $28.78. The middle half of them earn between $33.27 and $44.81 an hour. About 280 work in the metro. That is 36.7 per 10,000 jobs, compared with 30.7 nationally, which suggests plenty of local crews to bid.
Pipelayers (47-2151) carry 20% of the labor weighting. BLS does not publish this trade for the Racine metro, so we used the Wisconsin statewide median: $41.77 an hour against $23.56 for the US. The middle half of them earn between $38.94 and $44.98 an hour.
A quick sensitivity check: moving the lead trade (construction laborers) from the median to the 75th percentile wage adds about $120 to the midpoint estimate; the 25th percentile takes off about $65. That is a swing of roughly 4.2% to 7.4% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Racine-Mount Pleasant has 76,280 jobs in total (BLS, May 2025), ranking 243rd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 50% | $21.83 | $26.11 | $33.66 | $22.66 | 1.15 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $33.27 | $43.43 | $44.81 | $28.78 | 1.51 | metro |
| Pipelayers (47-2151) | 20% | $38.94 | $41.77 | $44.98 | $23.56 | 1.77 | state |
| Blended | 100% | 1.38 | |||||
Racine against nearby metros and the rest of Wisconsin
Same job, same size (60 linear ft), priced for the nearest metros. Chicago is the priciest of the group at $1,650. Sheboygan is the cheapest at $1,500.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Racine, WIthis page | $700 – $2,450 | $1,600 | |
| Milwaukee, WI10 miles | $700 – $2,450 | $1,600 | level |
| Kenosha, WI15 miles | $700 – $2,450 | $1,550 | −1% |
| Sheboygan, WI65 miles | $670 – $2,350 | $1,500 | −5% |
| Janesville, WI65 miles | $670 – $2,350 | $1,500 | −5% |
| Chicago, IL70 miles | $740 – $2,600 | $1,650 | +6% |
| Wisconsin (statewide) | $690 – $2,400 | $1,550 | −2% |
| United States | $600 – $2,100 | $1,350 | −14% |
Out of the 300 metros we cover, Racine ranks #36 for the cost of this job (#1 is the most expensive). Statewide, Racine is 2% above the Wisconsin figure.
Elsewhere in Wisconsin
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Milwaukee, WI | 820,780 jobs | $700 – $2,450 | $1,600 | level |
| Madison, WI | 408,070 jobs | $700 – $2,450 | $1,550 | level |
| Green Bay, WI | 174,550 jobs | $690 – $2,400 | $1,550 | −2% |
| Appleton, WI | 124,230 jobs | $710 – $2,450 | $1,600 | +1% |
| Oshkosh, WI | 93,750 jobs | $670 – $2,350 | $1,500 | −4% |
| Eau Claire, WI | 86,060 jobs | $690 – $2,400 | $1,550 | −1% |
Metros of a similar size
Big cities and small ones price differently, so here is Racine against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Napa, CA | 77,860 jobs | $740 – $2,600 | $1,650 | +5% |
| Warner Robins, GA | 76,050 jobs | $540 – $1,900 | $1,200 | −23% |
| Chico, CA | 78,220 jobs | $700 – $2,450 | $1,600 | level |
| Kenosha, WI | 75,450 jobs | $700 – $2,450 | $1,550 | −1% |
The best months for French drain in Racine
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Racine Batten Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For digging, grading and setting material in the ground, the comfortable months in Racine are April through October: 7 of 12. Outside them, January, February, March, November and December have an average overnight low at or below freezing (32°F).
In January, February, March, November and December the average low is at or below freezing, which means frozen ground and slower digging, compaction and sod or stone placement. NOAA counts about 126 days a year with a low at or below 32°F at this station.
Racine gets about 32 inches of precipitation in a normal year. The wettest months are April, May and June (4.0 inches in June). Inside the workable window, July and October are the driest, at 2.9 and 2.9 inches. The station averages about 7 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 31 | 16 | 1.3 | Cold |
| Feb | 34 | 19 | 1.1 | Cold |
| Mar | 43 | 28 | 2.1 | Cold |
| Apr | 54 | 37 | 3.7 | Workable |
| May | 66 | 46 | 3.5 | Workable |
| Jun | 76 | 57 | 4.0 | Workable |
| Jul | 81 | 63 | 2.9 | Workable |
| Aug | 80 | 63 | 3.4 | Workable |
| Sep | 73 | 55 | 3.2 | Workable |
| Oct | 61 | 43 | 2.9 | Workable |
| Nov | 47 | 32 | 2.2 | Cold |
| Dec | 36 | 22 | 1.6 | Cold |
Related projects, priced for Racine
Jobs that often go together with French drain are priced below at their usual sizes, using the same Racine wage and price inputs. Compared with national midpoints, gravel driveway comes out highest (+13%) and sod installation lowest (−1%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Retaining wall | 200 sq ft of wall face | $8,100 – $14,500 | +10% |
| Gravel driveway | 1,000 sq ft | $2,850 – $11,500 | +13% |
| Sod installation | 1,500 sq ft | $1,500 – $3,250 | −1% |
| Concrete slab | 400 sq ft | $2,550 – $5,300 | +3% |
| Sprinkler system | 4,000 sq ft of lawn | $4,400 – $11,000 | +10% |
| Inground pool | 450 sq ft | $40,600 – $126,500 | +12% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,250 to $1,950 for Racine, WI is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Racine, WI: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
French drain in Racine: your questions
+How much does it cost to install a French drain in Racine?
For 60 linear ft, expect $700 to $2,450 in the Racine area. A standard-spec job lands at $1,250 to $1,950. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for French drain in Racine?
About $11.50 to $41 per linear ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $10 to $35.
+Is French drain cheaper in Racine or Milwaukee?
Milwaukee is 10 miles away. The midpoint for 60 linear ft there is $1,600, which is 0% more than Racine ($1,600). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Racine?
About 62% at the midpoint, or $970 out of $1,600. Materials are 38% and permits 0%. Nationally, labor is 52%.
+What would side yard (60 linear ft) cost in Racine?
$700 to $2,450. Pick a different size in the estimator above to get your own number.
+Does French drain need a permit in Racine?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Racine area (our national range of $0 to $0 scaled by the local price level).
+Is Racine expensive for French drain compared with the rest of Wisconsin?
Racine is 2% above the Wisconsin statewide estimate ($1,550 at the midpoint). We cover 12 metros in Wisconsin; see the state page to compare them.
+What do construction laborers earn in Racine?
The BLS median is $26.11 an hour in the Racine area, compared with $22.66 nationally. The 25th to 75th percentile range is $21.83 to $33.66.
+What do basic and premium French drain work cost in Racine?
For 60 linear ft, basic work runs $700 to $1,400 and premium work $1,750 to $2,450. Basic means: shallow yard drain, easy digging. Premium means: deep or long drain, hard soil, dry well or sump discharge.
+When is the best time to install a French drain in Racine?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through October. July and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
French drain near Racine
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a French Drain Cost? (2026) (accessed November 4, 2026)
- Cost to Renovate: Renovation Labor Report 2026: Where the Money Goes (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = 48% of the installed price, from Cost to Renovate's mid-range 'Outdoor Living' category split (44% labor, 48% materials). It is a category average, not a French-drain figure, so the materials line here is a rough one.