French drain cost in Columbia, MO
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (60 linear ft)
- $610 – $2,150
- Per linear ft
- $10 – $35.50
- before permit
- Versus US midpoint
- +2%
- US $1,350
- Rank of 300 metros
- #124
- 1 = most expensive
Local price for a French drain in the Columbia area: $610 to $2,150 for 60 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Construction laborers earn a median of $27.31 an hour in the Columbia area, 21% above the US median of $22.66.
Estimate your french drain cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 60 linear ft in Columbia, MO, standard level
$1,050 to $1,700
About $18 to $28 per linear ft before permits. Labor is about 56% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $470 | $750 |
| Labor | $590 | $930 |
| Permits and fees | $0 | $0 |
| Total | $1,050 | $1,700 |
Cost breakdown for 60 linear ft in Columbia, MO
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $270 | $610 | $950 | 44% |
| Labor | $340 | $760 | $1,200 | 56% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $610 | $1,350 | $2,150 | 100% |
Where the Columbia price comes from
Labor is 56% of the midpoint bill here, against 52% nationally. The mix of trades behind this job is construction laborers (50%), operating engineers and other construction equipment operators (30%), pipelayers (20%). We weight each trade's local median wage by that share and compare it with the national median. In Columbia the blended ratio comes out at 1.09.
Materials are scaled with BEA's regional price parity for goods. Columbia is at 94.2 against 100 for the US, so a materials line of $650 nationally becomes $610 here (midpoint, 60 linear ft). Permits follow the all-items index of 89.4: $0 to $0.
Data note: 20% of the labor weighting for this project uses a national median because BLS has no published metro figure for that trade in Columbia. The wage table below marks each row.
Cost by quality level and size in Columbia
The cited range is split into basic, standard and premium bands, then scaled to Columbia. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from short run (30 linear ft) to long run (120 linear ft).
Basic
$610 to $1,200
Shallow yard drain, easy digging
Standard
$1,050 to $1,700
Standard drain with fabric, gravel and a pop-up outlet
Premium
$1,550 to $2,150
Deep or long drain, hard soil, dry well or sump discharge
| Size | Basic | Standard | Premium |
|---|---|---|---|
| short run (30 linear ft) | $310 – $610 | $530 – $840 | $760 – $1,050 |
| side yard (60 linear ft) | $610 – $1,200 | $1,050 – $1,700 | $1,550 – $2,150 |
| long run (120 linear ft) | $1,200 – $2,450 | $2,150 – $3,350 | $3,050 – $4,250 |
Specs and site conditions that change a Columbia bid
Crawl space drains
A crawl space French drain is $2,000-$8,000 installed.
Exterior versus interior
A shallow exterior French drain is $10-$35 per linear foot; an interior basement drain is $40-$85 per foot, or $4,000-$17,000 installed (HomeGuide).
Where the water goes
A sump pump adds $500-$1,800 and a dry well $50-$3,000+. Discharging to a storm drain can mean extra permit fees.
Planning more than one job in Columbia?
Jobs that often go together with French drain are priced below at their usual sizes, using the same Columbia wage and price inputs. Compared with national midpoints, retaining wall comes out highest (+3%) and sod installation lowest (−3%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Retaining wall | 200 sq ft of wall face | $7,450 – $13,600 | +3% |
| Gravel driveway | 1,000 sq ft | $2,550 – $10,300 | +1% |
| Sod installation | 1,500 sq ft | $1,450 – $3,200 | −3% |
| Concrete slab | 400 sq ft | $2,450 – $5,150 | −1% |
| Sprinkler system | 4,000 sq ft of lawn | $3,950 – $9,900 | −1% |
| Inground pool | 450 sq ft | $36,800 – $115,000 | +2% |
The best months for French drain in Columbia
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Columbia U Of M (in the city). They are 30-year averages, so any one year can run hotter, colder or wetter.
For digging, grading and setting material in the ground, the comfortable months in Columbia are March through November: 9 of 12. Outside them, January, February and December have an average overnight low at or below freezing (32°F).
In January, February and December the average low is at or below freezing, which means frozen ground and slower digging, compaction and sod or stone placement. NOAA counts about 93 days a year with a low at or below 32°F at this station.
Columbia gets about 45 inches of precipitation in a normal year, including roughly 17 inches of snow. The wettest months are April, May and June (5.2 inches in May). Inside the workable window, March and November are the driest, at 3.2 and 3.0 inches. The station averages about 41 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 39 | 23 | 2.4 | Cold |
| Feb | 45 | 27 | 2.3 | Cold |
| Mar | 56 | 36 | 3.2 | Workable |
| Apr | 67 | 46 | 4.8 | Workable |
| May | 76 | 56 | 5.2 | Workable |
| Jun | 85 | 65 | 5.1 | Workable |
| Jul | 89 | 69 | 4.6 | Workable |
| Aug | 88 | 67 | 4.1 | Workable |
| Sep | 80 | 59 | 4.3 | Workable |
| Oct | 68 | 47 | 3.5 | Workable |
| Nov | 55 | 37 | 3.0 | Workable |
| Dec | 44 | 27 | 2.2 | Cold |
Who does the work: Columbia trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Columbia the blend is 1.09.
For construction laborers (47-2061, weighted 50%) the local median is $27.31 an hour, which is 21% above the national $22.66. The middle half of them earn between $21.64 and $37.38 an hour. BLS counts 470 of them working in the area, 43.6 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
Operating engineers and other construction equipment operators (47-2073), 30% of the weighting: a median of $27.29 an hour, 5% below the US median of $28.78. The middle half of them earn between $22.80 and $39.45 an hour. About 310 work in the metro. That is 28.8 per 10,000 jobs, compared with 30.7 nationally, so the supply of crews looks typical.
Pipelayers (47-2151) carry 20% of the labor weighting. BLS does not publish this trade for the Columbia metro, so we used the national median: $23.56 an hour against $23.56 for the US. The middle half of them earn between $21.15 and $29.52 an hour.
A quick sensitivity check: moving the lead trade (construction laborers) from the median to the 75th percentile wage adds about $160 to the midpoint estimate; the 25th percentile takes off about $90. That is a swing of roughly 6.4% to 11.4% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Columbia has 107,680 jobs in total (BLS, May 2025), ranking 194th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 50% | $21.64 | $27.31 | $37.38 | $22.66 | 1.21 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $22.80 | $27.29 | $39.45 | $28.78 | 0.95 | metro |
| Pipelayers (47-2151) | 20% | $21.15 | $23.56 | $29.52 | $23.56 | 1.00 | US |
| Blended | 100% | 1.09 | |||||
How Columbia compares
Same job, same size (60 linear ft), priced for the nearest metros. St. Louis is the priciest of the group at $1,550. Springfield is the cheapest at $1,300.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Columbia, MOthis page | $610 – $2,150 | $1,350 | |
| Jefferson City, MO35 miles | $640 – $2,250 | $1,450 | +4% |
| Kansas City, MO100 miles | $600 – $2,100 | $1,350 | −2% |
| Springfield, MO115 miles | $580 – $2,000 | $1,300 | −6% |
| St. Louis, MO120 miles | $690 – $2,400 | $1,550 | +13% |
| Springfield, IL165 miles | $690 – $2,400 | $1,550 | +12% |
| Missouri (statewide) | $620 – $2,200 | $1,400 | +2% |
| United States | $600 – $2,100 | $1,350 | −2% |
Out of the 300 metros we cover, Columbia ranks #124 for the cost of this job (#1 is the most expensive). Statewide, Columbia is 2% below the Missouri figure.
Elsewhere in Missouri
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| St. Louis, MO | 1,341,320 jobs | $690 – $2,400 | $1,550 | +13% |
| Kansas City, MO | 1,096,110 jobs | $600 – $2,100 | $1,350 | −2% |
| Springfield, MO | 223,030 jobs | $580 – $2,000 | $1,300 | −6% |
| Joplin, MO | 87,190 jobs | $580 – $2,050 | $1,300 | −5% |
| Jefferson City, MO | 80,220 jobs | $640 – $2,250 | $1,450 | +4% |
Metros of a similar size
Big cities and small ones price differently, so here is Columbia against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Bend, OR | 108,240 jobs | $670 – $2,350 | $1,500 | +9% |
| Hagerstown, MD | 107,170 jobs | $570 – $2,000 | $1,300 | −7% |
| Tuscaloosa, AL | 108,460 jobs | $530 – $1,850 | $1,200 | −13% |
| Champaign, IL | 105,500 jobs | $670 – $2,350 | $1,500 | +11% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,050 to $1,700 for Columbia, MO is attached.
Detailed french drain report for Columbia, MO, $9
Multi-page report for Columbia, MO: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
French drain in Columbia: your questions
+How much does it cost to install a French drain in Columbia?
For 60 linear ft, expect $610 to $2,150 in the Columbia area. A standard-spec job lands at $1,050 to $1,700. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for French drain in Columbia?
About $10 to $35.50 per linear ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $10 to $35.
+Is French drain cheaper in Columbia or Jefferson City?
Jefferson City is 35 miles away. The midpoint for 60 linear ft there is $1,450, which is 4% more than Columbia ($1,350). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Columbia?
About 56% at the midpoint, or $760 out of $1,350. Materials are 44% and permits 0%. Nationally, labor is 52%.
+What would side yard (60 linear ft) cost in Columbia?
$610 to $2,150. Pick a different size in the estimator above to get your own number.
+Does French drain need a permit in Columbia?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Columbia area (our national range of $0 to $0 scaled by the local price level).
+Is Columbia expensive for French drain compared with the rest of Missouri?
Columbia is 2% below the Missouri statewide estimate ($1,400 at the midpoint). We cover 6 metros in Missouri; see the state page to compare them.
+What do construction laborers earn in Columbia?
The BLS median is $27.31 an hour in the Columbia area, compared with $22.66 nationally. The 25th to 75th percentile range is $21.64 to $37.38.
+What do basic and premium French drain work cost in Columbia?
For 60 linear ft, basic work runs $610 to $1,200 and premium work $1,550 to $2,150. Basic means: shallow yard drain, easy digging. Premium means: deep or long drain, hard soil, dry well or sump discharge.
+When is the best time to install a French drain in Columbia?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
French drain near Columbia
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a French Drain Cost? (2026) (accessed November 4, 2026)
- Cost to Renovate: Renovation Labor Report 2026: Where the Money Goes (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = 48% of the installed price, from Cost to Renovate's mid-range 'Outdoor Living' category split (44% labor, 48% materials). It is a category average, not a French-drain figure, so the materials line here is a rough one.