French drain cost in Gulfport, MS
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (60 linear ft)
- $540 – $1,850
- Per linear ft
- $8.90 – $31
- before permit
- Versus US midpoint
- −11%
- US $1,350
- Rank of 300 metros
- #262
- 1 = most expensive
If you want to install a French drain in Gulfport, plan on $540 to $1,850 for 60 linear ft, all in. Per linear ft, that is $8.90 to $31 for materials and labor, with the permit on top. The local midpoint runs 11% lower than the national one. Construction laborers earn a median of $18.69 an hour in the Gulfport area, 18% below the US median of $22.66.
Estimate your french drain cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 60 linear ft in Gulfport, MS, standard level
$940 to $1,450
About $15.50 to $24.50 per linear ft before permits. Labor is about 48% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $480 | $760 |
| Labor | $450 | $710 |
| Permits and fees | $0 | $0 |
| Total | $940 | $1,450 |
Cost breakdown for 60 linear ft in Gulfport, MS
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $280 | $620 | $970 | 52% |
| Labor | $260 | $580 | $900 | 48% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $540 | $1,200 | $1,850 | 100% |
Where the Gulfport price comes from
Labor is 48% of the midpoint bill here, against 52% nationally. The mix of trades behind this job is construction laborers (50%), operating engineers and other construction equipment operators (30%), pipelayers (20%). We weight each trade's local median wage by that share and compare it with the national median. In Gulfport the blended ratio comes out at 0.83.
On the materials line, the BEA goods price index for the Gulfport metro is 96.2 (US = 100). The midpoint materials bill for 60 linear ft comes to $620, compared with $650 at national prices. Permit and inspection fees are scaled by the broader index (90.0) and land at $0 to $0.
French drain: what moves the price in Gulfport
Exterior versus interior
A shallow exterior French drain is $10-$35 per linear foot; an interior basement drain is $40-$85 per foot, or $4,000-$17,000 installed (HomeGuide).
Where the water goes
A sump pump adds $500-$1,800 and a dry well $50-$3,000+. Discharging to a storm drain can mean extra permit fees.
Depth and soil
Rocky or clay soil and long trenches raise excavation time.
Gulfport labor market for French drain
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Gulfport is 0.83 times the national level.
Construction laborers (47-2061), 50% of the weighting: a median of $18.69 an hour, 18% below the US median of $22.66. The middle half of them earn between $16.86 and $22.67 an hour. About 1,090 work in the metro. That is 68.9 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
For operating engineers and other construction equipment operators (47-2073, weighted 30%) the local median is $23.42 an hour, which is 19% below the national $28.78. The middle half of them earn between $19.05 and $27.50 an hour. BLS counts 510 of them working in the area, 32.2 for every 10,000 jobs (US: 30.7), so the local bench is about average.
Pipelayers (47-2151), 20% of the weighting: a median of $20.16 an hour, 14% below the US median of $23.56. The middle half of them earn between $18.59 and $24.05 an hour. About 50 work in the metro. That is 3.2 per 10,000 jobs, compared with 2.1 nationally, which suggests plenty of local crews to bid.
Quotes come from real crews, not medians. If the construction laborers on your job are paid at the 75th percentile ($22.67 an hour) instead of the median, the labor line grows by about $60. At the 25th percentile ($16.86) it shrinks by about $30. The total moves by 5.1% or 2.4%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 158,310 jobs in the Gulfport-Biloxi area. That makes it the 149th largest of the 300 metros we cover, with 0.10% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 50% | $16.86 | $18.69 | $22.67 | $22.66 | 0.82 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $19.05 | $23.42 | $27.50 | $28.78 | 0.81 | metro |
| Pipelayers (47-2151) | 20% | $18.59 | $20.16 | $24.05 | $23.56 | 0.86 | metro |
| Blended | 100% | 0.83 | |||||
What nearby projects cost in Gulfport
Because every project leans on different trades, Gulfport's wage level does not move all prices equally. Against the US midpoint, sprinkler system runs −8% and concrete slab −13%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Retaining wall | 200 sq ft of wall face | $6,100 – $12,100 | −11% |
| Gravel driveway | 1,000 sq ft | $2,200 – $9,100 | −11% |
| Sod installation | 1,500 sq ft | $1,300 – $2,900 | −12% |
| Concrete slab | 400 sq ft | $2,100 – $4,550 | −13% |
| Sprinkler system | 4,000 sq ft of lawn | $3,700 – $9,250 | −8% |
| Inground pool | 450 sq ft | $32,200 – $101,000 | −11% |
Is Gulfport cheap or dear? The local comparison
Of the five closest metros, 3 are cheaper than Gulfport. Hattiesburg is the lowest at about $1,150 (midpoint, 60 linear ft), 50 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Gulfport, MSthis page | $540 – $1,850 | $1,200 | |
| Mobile, AL50 miles | $530 – $1,850 | $1,200 | −1% |
| Hattiesburg, MS50 miles | $520 – $1,850 | $1,150 | −2% |
| Slidell, LA55 miles | $530 – $1,850 | $1,200 | −1% |
| Daphne, AL75 miles | $540 – $1,900 | $1,200 | level |
| New Orleans, LA90 miles | $550 – $1,900 | $1,250 | +2% |
| Mississippi (statewide) | $530 – $1,850 | $1,200 | −1% |
| United States | $600 – $2,100 | $1,350 | +12% |
Across 300 US metros, Gulfport comes in at #262 from the top. The priciest is San Francisco, CA at $1,900; the cheapest is McAllen, TX at $1,100 (midpoints, 60 linear ft). Statewide, Gulfport is 1% above the Mississippi figure.
Other Mississippi metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Jackson, MS | 270,730 jobs | $530 – $1,850 | $1,200 | −1% |
| Hattiesburg, MS | 62,230 jobs | $520 – $1,850 | $1,150 | −2% |
Cities with a workforce like Gulfport's
Big cities and small ones price differently, so here is Gulfport against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Youngstown, OH | 160,160 jobs | $630 – $2,200 | $1,400 | +17% |
| Eugene, OR | 157,710 jobs | $640 – $2,250 | $1,450 | +20% |
| Waterbury, CT | 160,710 jobs | $650 – $2,300 | $1,450 | +22% |
| Brownsville, TX | 157,450 jobs | $510 – $1,800 | $1,150 | −5% |
Gulfport: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Gulfport wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$540 to $1,050
Shallow yard drain, easy digging
Standard
$940 to $1,450
Standard drain with fabric, gravel and a pop-up outlet
Premium
$1,350 to $1,850
Deep or long drain, hard soil, dry well or sump discharge
| Size | Basic | Standard | Premium |
|---|---|---|---|
| short run (30 linear ft) | $270 – $540 | $470 – $740 | $670 – $940 |
| side yard (60 linear ft) | $540 – $1,050 | $940 – $1,450 | $1,350 – $1,850 |
| long run (120 linear ft) | $1,050 – $2,150 | $1,850 – $2,950 | $2,700 – $3,750 |
Climate in Gulfport: timing your French drain job
We use NOAA's 1991-2020 climate normals for Gulfport - Biloxi Ap (in the city). These are 30-year monthly averages, not forecasts.
September through June is the stretch where digging, grading and setting material in the ground runs into the fewest weather problems in Gulfport (10 of 12 months). July and August have an average daytime high of 90°F or more.
Gulfport gets about 63 inches of precipitation in a normal year. The wettest months are June, July and August (7.2 inches in July). Inside the workable window, October and November are the driest, at 3.7 and 4.0 inches. The station averages about 69 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 61 | 42 | 4.9 | Workable |
| Feb | 65 | 46 | 4.4 | Workable |
| Mar | 70 | 52 | 5.2 | Workable |
| Apr | 77 | 58 | 5.5 | Workable |
| May | 84 | 66 | 4.7 | Workable |
| Jun | 89 | 73 | 6.9 | Workable |
| Jul | 90 | 75 | 7.2 | Hot |
| Aug | 91 | 75 | 6.5 | Hot |
| Sep | 88 | 71 | 5.2 | Workable |
| Oct | 80 | 60 | 3.7 | Workable |
| Nov | 70 | 49 | 4.0 | Workable |
| Dec | 64 | 45 | 4.5 | Workable |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $940 to $1,450 for Gulfport, MS is attached.
Detailed french drain report for Gulfport, MS, $9
Multi-page report for Gulfport, MS: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
French drain in Gulfport: your questions
+How much does it cost to install a French drain in Gulfport?
For 60 linear ft, expect $540 to $1,850 in the Gulfport area. A standard-spec job lands at $940 to $1,450. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for French drain in Gulfport?
About $8.90 to $31 per linear ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $10 to $35.
+Is French drain cheaper in Gulfport or Mobile?
Mobile is 50 miles away. The midpoint for 60 linear ft there is $1,200, which is 1% less than Gulfport ($1,200). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Gulfport?
About 48% at the midpoint, or $580 out of $1,200. Materials are 52% and permits 0%. Nationally, labor is 52%.
+What would side yard (60 linear ft) cost in Gulfport?
$540 to $1,850. Pick a different size in the estimator above to get your own number.
+Does French drain need a permit in Gulfport?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Gulfport area (our national range of $0 to $0 scaled by the local price level).
+Is Gulfport expensive for French drain compared with the rest of Mississippi?
Gulfport is 1% above the Mississippi statewide estimate ($1,200 at the midpoint). We cover 3 metros in Mississippi; see the state page to compare them.
+What do construction laborers earn in Gulfport?
The BLS median is $18.69 an hour in the Gulfport area, compared with $22.66 nationally. The 25th to 75th percentile range is $16.86 to $22.67.
+What do basic and premium French drain work cost in Gulfport?
For 60 linear ft, basic work runs $540 to $1,050 and premium work $1,350 to $1,850. Basic means: shallow yard drain, easy digging. Premium means: deep or long drain, hard soil, dry well or sump discharge.
+When is the best time to install a French drain in Gulfport?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through June. October and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
French drain near Gulfport
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a French Drain Cost? (2026) (accessed November 4, 2026)
- Cost to Renovate: Renovation Labor Report 2026: Where the Money Goes (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = 48% of the installed price, from Cost to Renovate's mid-range 'Outdoor Living' category split (44% labor, 48% materials). It is a category average, not a French-drain figure, so the materials line here is a rough one.