Skip to content
CostLocal

French drain cost in Kentucky

Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.

Statewide range (60 linear ft)
$590 – $2,100
Per linear ft
$9.90 – $34.50
before permit
Versus US midpoint
−1%
US $1,350
Metros covered
3

What does it cost to install a French drain in Kentucky? Plan on $590 to $2,100 for 60 linear ft. Wages (1.01x the US blend), materials (price index 96.0) and permit costs (90.2) put the state below the national midpoint by 1%.

Inside Kentucky, the metros we cover range from $1,300 (Bowling Green) to $1,350 (Louisville) at the midpoint. Pick your closest city in the table for a tighter number.

Estimate your french drain cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Standard drain with fabric, gravel and a pop-up outlet

Estimated cost for 60 linear ft in Kentucky (statewide), standard level

$1,050 to $1,650

About $17.50 to $27 per linear ft before permits. Labor is about 53% of the bill.

Cost breakdown
PartLowHigh
Materials$480$760
Labor$550$870
Permits and fees$0$0
Total$1,050$1,650
Save and get a PDF report

Cost breakdown for 60 linear ft in Kentucky

Part of the jobLowMidpointHighShare
Materials$280$620$97047%
Labor$320$710$1,10053%
Permits and fees$0$0$00%
Total$590$1,350$2,100100%

Kentucky against its neighbors

Kentucky ranks 31 of 51 (the 50 states plus DC) for French drain, where 1 is the most expensive. The costliest is Hawaii at $1,850 and the cheapest Arkansas at $1,150, both for 60 linear ft at the midpoint. Kentucky sits at $1,350. The five states closest by workforce center are listed below.

States near Kentucky, same project and size
StateDistanceRangeMidpointvs. here
Indiana140 miles away$660 – $2,300$1,500+11%
Tennessee170 miles away$570 – $2,000$1,250−5%
Ohio210 miles away$650 – $2,250$1,450+9%
West Virginia220 miles away$550 – $1,950$1,250−7%
Illinois280 miles away$720 – $2,500$1,600+21%

French drain: what moves the price in Kentucky

  • Exterior versus interior

    A shallow exterior French drain is $10-$35 per linear foot; an interior basement drain is $40-$85 per foot, or $4,000-$17,000 installed (HomeGuide).

  • Where the water goes

    A sump pump adds $500-$1,800 and a dry well $50-$3,000+. Discharging to a storm drain can mean extra permit fees.

  • Depth and soil

    Rocky or clay soil and long trenches raise excavation time.

  • Crawl space drains

    A crawl space French drain is $2,000-$8,000 installed.

When Kentucky weather lets you install

Season matters for French drain. For each Kentucky metro below we took NOAA's 1991-2020 monthly normals from the nearest suitable station and counted comfortable months for digging and ground work.

Louisville has the longest comfortable season of the metros we cover in Kentucky at 9 months (March through November); Bowling Green has the shortest at 8 (March through June and August through November). Rainfall runs from 48 inches a year in Louisville to 50 inches in Bowling Green.

We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.

Climate by metro (NOAA 1991-2020 normals)
MetroJan avg low °FJul avg high °FPrecip (in/yr)Comfortable months
Louisville2889489: March through November
Lexington2587509: March through November
Bowling Green2890508: March through June and August through November

Which Kentucky city is cheapest for French drain?

2 of the 3 metros sit above the statewide midpoint of $1,350, and the top-to-bottom gap is 2%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.

MetroRange (60 linear ft)Midpointvs. state
Louisville, KY$600 – $2,100$1,350+1%
Lexington, KY$600 – $2,100$1,350+1%
Bowling Green, KY$580 – $2,050$1,300−1%

Quality levels and sizes in Kentucky

The cited range is cut into three overlapping bands (basic, standard and premium) and scaled to statewide Kentucky wages and prices. The grid prices the same bands at 3 common sizes.

Basic

$590 to $1,200

Shallow yard drain, easy digging

Standard

$1,050 to $1,650

Standard drain with fabric, gravel and a pop-up outlet

Premium

$1,500 to $2,100

Deep or long drain, hard soil, dry well or sump discharge

Cost by size and quality level
SizeBasicStandardPremium
short run (30 linear ft)$300 – $590$520 – $820$740 – $1,050
side yard (60 linear ft)$590 – $1,200$1,050 – $1,650$1,500 – $2,100
long run (120 linear ft)$1,200 – $2,350$2,100 – $3,250$2,950 – $4,150

Other Kentucky jobs that often go with French drain

The table prices neighboring jobs at their usual sizes using statewide Kentucky wages and prices. Against national midpoints, sprinkler system comes out highest (−3%) and concrete slab lowest (−6%), because each job leans on different trades.

Related projects with local prices
ProjectSizeRangevs. US
Retaining wall200 sq ft of wall face$6,800 – $12,900−4%
Gravel driveway1,000 sq ft$2,400 – $9,800−4%
Sod installation1,500 sq ft$1,450 – $3,150−5%
Concrete slab400 sq ft$2,300 – $4,900−6%
Sprinkler system4,000 sq ft of lawn$3,900 – $9,700−3%
Inground pool450 sq ft$34,800 – $109,000−3%

Kentucky labor market for French drain

Statewide wages come from BLS's state-level estimates, which blend big cities with small towns and rural areas. 3 trades drive the labor line for this job, and the weighted ratio against the national wage level is 1.01 for Kentucky.

Construction laborers (47-2061), 50% of the weighting: a median of $21.98 an hour, 3% below the US median of $22.66. The middle half of them earn between $18.13 and $24.06 an hour. About 13,280 work in the state. That is 66.4 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.

For operating engineers and other construction equipment operators (47-2073, weighted 30%) the local median is $27.78 an hour, which is 3% below the national $28.78. The middle half of them earn between $23.58 and $31.59 an hour. BLS counts 7,050 of them working in the state, 35.2 for every 10,000 jobs (US: 30.7), so the local bench is about average.

Pipelayers (47-2151), 20% of the weighting: a median of $28.28 an hour, 20% above the US median of $23.56. The middle half of them earn between $25.91 and $28.29 an hour. About 60 work in the state. That is 0.3 per 10,000 jobs, compared with 2.1 nationally, so expect fewer local crews to bid.

A crew paid at the 75th percentile for construction laborers ($24.06 an hour) would add about $30 to the statewide midpoint; one at the 25th percentile ($18.13) would take off about $60. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.

BLS counts 2,000,360 jobs across Kentucky (May 2025), which is 1.3% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Construction laborers (47-2061)50%$18.13$21.98$24.06$22.660.97state
Operating engineers and other construction equipment operators (47-2073)30%$23.58$27.78$31.59$28.780.97state
Pipelayers (47-2151)20%$25.91$28.28$28.29$23.561.20state
Blended100%1.01

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,050 to $1,650 for Kentucky is attached.

Detailed french drain report for Kentucky, $9

The report lays out the french drain numbers for Kentucky line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

French drain in Kentucky: your questions

+How much does it cost to install a French drain in Kentucky?

$590 to $2,100 for 60 linear ft, using statewide wages and prices. Metro areas inside Kentucky can sit above or below that.

+Which city in Kentucky is cheapest for French drain?

Bowling Green at about $1,300 (midpoint, 60 linear ft). The priciest is Louisville at $1,350.

+Is French drain cheaper in Kentucky than the US average?

It is 1% cheaper: $1,350 against $1,350 for 60 linear ft at the midpoint.

+What share of the price is labor in Kentucky?

About 53% ($710). Materials are 47%. Statewide labor for this job is weighted 1.01x the national wage level.

+What do construction laborers earn in Kentucky?

The BLS statewide median is $21.98 an hour, against $22.66 for the US. The 25th to 75th percentile range is $18.13 to $24.06.

+Where does Kentucky rank for French drain costs?

31st most expensive of 51 (the 50 states plus DC) at the midpoint, $1,350 for 60 linear ft. Rank 1 is the costliest.

+What do basic and premium French drain work cost in Kentucky?

For 60 linear ft, basic work runs $590 to $1,200 and premium work $1,500 to $2,100. Basic means: shallow yard drain, easy digging. Premium means: deep or long drain, hard soil, dry well or sump discharge.

+Does the season matter for French drain in Kentucky?

Yes where winters or summers are hard. Of the Kentucky metros we cover, Louisville has the most comfortable months (9 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.

French drain by city in Kentucky

French drain: all pricesKentucky cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = 48% of the installed price, from Cost to Renovate's mid-range 'Outdoor Living' category split (44% labor, 48% materials). It is a category average, not a French-drain figure, so the materials line here is a rough one.