French drain cost in Atlanta, GA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (60 linear ft)
- $570 – $2,000
- Per linear ft
- $9.45 – $33
- before permit
- Versus US midpoint
- −6%
- US $1,350
- Rank of 300 metros
- #198
- 1 = most expensive
If you want to install a French drain in Atlanta, plan on $570 to $2,000 for 60 linear ft, all in. Per linear ft, that is $9.45 to $33 for materials and labor, with the permit on top. The local midpoint runs 6% lower than the national one. Construction laborers earn a median of $20.20 an hour in the Atlanta area, 11% below the US median of $22.66.
Estimate your french drain cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 60 linear ft in Atlanta, GA, standard level
$990 to $1,550
About $16.50 to $26 per linear ft before permits. Labor is about 49% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $510 | $800 |
| Labor | $480 | $760 |
| Permits and fees | $0 | $0 |
| Total | $990 | $1,550 |
Cost breakdown for 60 linear ft in Atlanta, GA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $290 | $650 | $1,000 | 51% |
| Labor | $280 | $620 | $970 | 49% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $570 | $1,250 | $2,000 | 100% |
What is behind the Atlanta number
Labor is 49% of the midpoint bill here, against 52% nationally. The mix of trades behind this job is construction laborers (50%), operating engineers and other construction equipment operators (30%), pipelayers (20%). We weight each trade's local median wage by that share and compare it with the national median. In Atlanta the blended ratio comes out at 0.89.
On the materials line, the BEA goods price index for the Atlanta metro is 100.4 (US = 100). The midpoint materials bill for 60 linear ft comes to $650, compared with $650 at national prices. Permit and inspection fees are scaled by the broader index (100.1) and land at $0 to $0.
Cost by quality level and size in Atlanta
Three bands are cut from the same cited range and localized for Atlanta wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$570 to $1,150
Shallow yard drain, easy digging
Standard
$990 to $1,550
Standard drain with fabric, gravel and a pop-up outlet
Premium
$1,400 to $2,000
Deep or long drain, hard soil, dry well or sump discharge
| Size | Basic | Standard | Premium |
|---|---|---|---|
| short run (30 linear ft) | $280 – $570 | $500 – $780 | $710 – $990 |
| side yard (60 linear ft) | $570 – $1,150 | $990 – $1,550 | $1,400 – $2,000 |
| long run (120 linear ft) | $1,150 – $2,250 | $2,000 – $3,100 | $2,850 – $3,950 |
French drain: what moves the price in Atlanta
Exterior versus interior
A shallow exterior French drain is $10-$35 per linear foot; an interior basement drain is $40-$85 per foot, or $4,000-$17,000 installed (HomeGuide).
Where the water goes
A sump pump adds $500-$1,800 and a dry well $50-$3,000+. Discharging to a storm drain can mean extra permit fees.
Depth and soil
Rocky or clay soil and long trenches raise excavation time.
Climate in Atlanta: timing your French drain job
We use NOAA's 1991-2020 climate normals for Atlanta Fulton Co Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
August through June is the stretch where digging, grading and setting material in the ground runs into the fewest weather problems in Atlanta (11 of 12 months). July has an average daytime high of 90°F or more.
Atlanta gets about 48 inches of precipitation in a normal year. The wettest months are February, March and July (5.0 inches in July). Inside the workable window, September and October are the driest, at 3.4 and 3.6 inches. The station averages about 54 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 54 | 34 | 4.3 | Workable |
| Feb | 58 | 37 | 4.3 | Workable |
| Mar | 66 | 43 | 4.5 | Workable |
| Apr | 74 | 50 | 3.6 | Workable |
| May | 81 | 58 | 3.6 | Workable |
| Jun | 87 | 67 | 3.8 | Workable |
| Jul | 90 | 70 | 5.0 | Hot |
| Aug | 89 | 69 | 4.0 | Workable |
| Sep | 84 | 63 | 3.4 | Workable |
| Oct | 75 | 51 | 3.6 | Workable |
| Nov | 64 | 41 | 3.8 | Workable |
| Dec | 56 | 36 | 4.2 | Workable |
What nearby projects cost in Atlanta
Because every project leans on different trades, Atlanta's wage level does not move all prices equally. Against the US midpoint, sod installation runs −1% and gravel driveway −7%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Retaining wall | 200 sq ft of wall face | $6,600 – $12,900 | −5% |
| Gravel driveway | 1,000 sq ft | $2,300 – $9,500 | −7% |
| Sod installation | 1,500 sq ft | $1,500 – $3,250 | −1% |
| Concrete slab | 400 sq ft | $2,250 – $4,900 | −6% |
| Sprinkler system | 4,000 sq ft of lawn | $3,750 – $9,450 | −6% |
| Inground pool | 450 sq ft | $33,900 – $106,000 | −6% |
Atlanta labor market for French drain
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Atlanta is 0.89 times the national level.
Construction laborers (47-2061), 50% of the weighting: a median of $20.20 an hour, 11% below the US median of $22.66. The middle half of them earn between $17.61 and $23.07 an hour. About 16,460 work in the metro. That is 57.0 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
For operating engineers and other construction equipment operators (47-2073, weighted 30%) the local median is $23.77 an hour, which is 17% below the national $28.78. The middle half of them earn between $22.23 and $28.47 an hour. BLS counts 8,360 of them working in the area, 28.9 for every 10,000 jobs (US: 30.7), so the local bench is about average.
Pipelayers (47-2151), 20% of the weighting: a median of $22.86 an hour, in line with the US median of $23.56. The middle half of them earn between $19.40 and $26.67 an hour. About 1,000 work in the metro. That is 3.5 per 10,000 jobs, compared with 2.1 nationally, which suggests plenty of local crews to bid.
Quotes come from real crews, not medians. If the construction laborers on your job are paid at the 75th percentile ($23.07 an hour) instead of the median, the labor line grows by about $45. At the 25th percentile ($17.61) it shrinks by about $40. The total moves by 3.5% or 3.1%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 2,889,670 jobs in the Atlanta-Sandy Springs-Roswell area. That makes it the 8th largest of the 300 metros we cover, with 1.86% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 50% | $17.61 | $20.20 | $23.07 | $22.66 | 0.89 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $22.23 | $23.77 | $28.47 | $28.78 | 0.83 | metro |
| Pipelayers (47-2151) | 20% | $19.40 | $22.86 | $26.67 | $23.56 | 0.97 | metro |
| Blended | 100% | 0.89 | |||||
Atlanta against nearby metros and the rest of Georgia
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 60 linear ft range from $1,150 to $1,250 across Atlanta and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Atlanta, GAthis page | $570 – $2,000 | $1,250 | |
| Gainesville, GA50 miles | $530 – $1,850 | $1,200 | −6% |
| Athens, GA70 miles | $530 – $1,850 | $1,200 | −7% |
| Macon, GA70 miles | $540 – $1,900 | $1,200 | −4% |
| Dalton, GA80 miles | $520 – $1,800 | $1,150 | −9% |
| Warner Robins, GA95 miles | $540 – $1,900 | $1,200 | −5% |
| Georgia (statewide) | $550 – $1,900 | $1,250 | −3% |
| United States | $600 – $2,100 | $1,350 | +6% |
Across 300 US metros, Atlanta comes in at #198 from the top. The priciest is San Francisco, CA at $1,900; the cheapest is McAllen, TX at $1,100 (midpoints, 60 linear ft). Statewide, Atlanta is 3% above the Georgia figure.
Other Georgia metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Augusta, GA | 231,930 jobs | $540 – $1,900 | $1,200 | −5% |
| Savannah, GA | 198,360 jobs | $540 – $1,900 | $1,200 | −5% |
| Columbus, GA | 116,380 jobs | $530 – $1,850 | $1,200 | −7% |
| Gainesville, GA | 103,870 jobs | $530 – $1,850 | $1,200 | −6% |
| Athens, GA | 95,800 jobs | $530 – $1,850 | $1,200 | −7% |
| Macon, GA | 95,030 jobs | $540 – $1,900 | $1,200 | −4% |
Cities with a workforce like Atlanta's
Big cities and small ones price differently, so here is Atlanta against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Philadelphia, PA | 2,897,830 jobs | $640 – $2,250 | $1,450 | +13% |
| Miami, FL | 2,819,940 jobs | $590 – $2,050 | $1,350 | +4% |
| Washington, DC | 3,136,190 jobs | $630 – $2,200 | $1,400 | +11% |
| Boston, MA | 2,703,890 jobs | $710 – $2,500 | $1,600 | +25% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $990 to $1,550 for Atlanta, GA is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Atlanta, GA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
French drain in Atlanta: your questions
+How much does it cost to install a French drain in Atlanta?
For 60 linear ft, expect $570 to $2,000 in the Atlanta area. A standard-spec job lands at $990 to $1,550. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for French drain in Atlanta?
About $9.45 to $33 per linear ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $10 to $35.
+Is French drain cheaper in Atlanta or Gainesville?
Gainesville is 50 miles away. The midpoint for 60 linear ft there is $1,200, which is 6% less than Atlanta ($1,250). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Atlanta?
About 49% at the midpoint, or $620 out of $1,250. Materials are 51% and permits 0%. Nationally, labor is 52%.
+What would side yard (60 linear ft) cost in Atlanta?
$570 to $2,000. Pick a different size in the estimator above to get your own number.
+Does French drain need a permit in Atlanta?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Atlanta area (our national range of $0 to $0 scaled by the local price level).
+Is Atlanta expensive for French drain compared with the rest of Georgia?
Atlanta is 3% above the Georgia statewide estimate ($1,250 at the midpoint). We cover 10 metros in Georgia; see the state page to compare them.
+What do construction laborers earn in Atlanta?
The BLS median is $20.20 an hour in the Atlanta area, compared with $22.66 nationally. The 25th to 75th percentile range is $17.61 to $23.07.
+What do basic and premium French drain work cost in Atlanta?
For 60 linear ft, basic work runs $570 to $1,150 and premium work $1,400 to $2,000. Basic means: shallow yard drain, easy digging. Premium means: deep or long drain, hard soil, dry well or sump discharge.
+When is the best time to install a French drain in Atlanta?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are August through June. September and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
French drain near Atlanta
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a French Drain Cost? (2026) (accessed November 4, 2026)
- Cost to Renovate: Renovation Labor Report 2026: Where the Money Goes (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = 48% of the installed price, from Cost to Renovate's mid-range 'Outdoor Living' category split (44% labor, 48% materials). It is a category average, not a French-drain figure, so the materials line here is a rough one.