French drain cost in New Haven, CT
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (60 linear ft)
- $670 – $2,350
- Per linear ft
- $11 – $39
- before permit
- Versus US midpoint
- +11%
- US $1,350
- Rank of 300 metros
- #74
- 1 = most expensive
Local price for a French drain in the New Haven area: $670 to $2,350 for 60 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 11% higher than the US figure. Construction laborers earn a median of $29.02 an hour in the New Haven area, 28% above the US median of $22.66.
Estimate your french drain cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 60 linear ft in New Haven, CT, standard level
$1,150 to $1,850
About $19.50 to $30.50 per linear ft before permits. Labor is about 58% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $490 | $770 |
| Labor | $680 | $1,050 |
| Permits and fees | $0 | $0 |
| Total | $1,150 | $1,850 |
Cost breakdown for 60 linear ft in New Haven, CT
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $280 | $630 | $980 | 42% |
| Labor | $390 | $870 | $1,350 | 58% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $670 | $1,500 | $2,350 | 100% |
What is behind the New Haven number
Labor is 58% of the midpoint bill here, against 52% nationally. The mix of trades behind this job is construction laborers (50%), operating engineers and other construction equipment operators (30%), pipelayers (20%). We weight each trade's local median wage by that share and compare it with the national median. In New Haven the blended ratio comes out at 1.24.
Materials are scaled with BEA's regional price parity for goods. New Haven is at 97.3 against 100 for the US, so a materials line of $650 nationally becomes $630 here (midpoint, 60 linear ft). Permits follow the all-items index of 104.6: $0 to $0.
Data note: 20% of the labor weighting for this project uses a national median because BLS has no published metro figure for that trade in New Haven. The wage table below marks each row.
What nearby projects cost in New Haven
Jobs that often go together with French drain are priced below at their usual sizes, using the same New Haven wage and price inputs. Compared with national midpoints, gravel driveway comes out highest (+14%) and concrete slab lowest (+6%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Retaining wall | 200 sq ft of wall face | $8,000 – $14,500 | +10% |
| Gravel driveway | 1,000 sq ft | $2,850 – $11,600 | +14% |
| Sod installation | 1,500 sq ft | $1,650 – $3,600 | +9% |
| Concrete slab | 400 sq ft | $2,650 – $5,500 | +6% |
| Sprinkler system | 4,000 sq ft of lawn | $4,500 – $11,300 | +13% |
| Inground pool | 450 sq ft | $40,800 – $127,000 | +13% |
New Haven: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to New Haven. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from short run (30 linear ft) to long run (120 linear ft).
Basic
$670 to $1,350
Shallow yard drain, easy digging
Standard
$1,150 to $1,850
Standard drain with fabric, gravel and a pop-up outlet
Premium
$1,650 to $2,350
Deep or long drain, hard soil, dry well or sump discharge
| Size | Basic | Standard | Premium |
|---|---|---|---|
| short run (30 linear ft) | $330 – $670 | $580 – $920 | $830 – $1,150 |
| side yard (60 linear ft) | $670 – $1,350 | $1,150 – $1,850 | $1,650 – $2,350 |
| long run (120 linear ft) | $1,350 – $2,650 | $2,350 – $3,650 | $3,350 – $4,650 |
The best months for French drain in New Haven
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, New Haven Tweed Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For digging, grading and setting material in the ground, the comfortable months in New Haven are April through November: 8 of 12. Outside them, January, February, March and December have an average overnight low at or below freezing (32°F).
In January, February, March and December the average low is at or below freezing, which means frozen ground and slower digging, compaction and sod or stone placement. NOAA counts about 102 days a year with a low at or below 32°F at this station.
New Haven gets about 42 inches of precipitation in a normal year. The wettest months are April, September and October (4.2 inches in April). Inside the workable window, July and November are the driest, at 3.4 and 3.1 inches. The station averages about 6 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 38 | 23 | 2.7 | Cold |
| Feb | 40 | 24 | 2.8 | Cold |
| Mar | 47 | 30 | 3.7 | Cold |
| Apr | 58 | 39 | 4.2 | Workable |
| May | 68 | 49 | 3.5 | Workable |
| Jun | 76 | 59 | 3.5 | Workable |
| Jul | 82 | 66 | 3.4 | Workable |
| Aug | 81 | 65 | 3.5 | Workable |
| Sep | 75 | 57 | 4.0 | Workable |
| Oct | 64 | 46 | 3.8 | Workable |
| Nov | 53 | 36 | 3.1 | Workable |
| Dec | 44 | 29 | 3.5 | Cold |
Specs and site conditions that change a New Haven bid
Exterior versus interior
A shallow exterior French drain is $10-$35 per linear foot; an interior basement drain is $40-$85 per foot, or $4,000-$17,000 installed (HomeGuide).
Where the water goes
A sump pump adds $500-$1,800 and a dry well $50-$3,000+. Discharging to a storm drain can mean extra permit fees.
Depth and soil
Rocky or clay soil and long trenches raise excavation time.
Is New Haven cheap or dear? The local comparison
Same job, same size (60 linear ft), priced for the nearest metros. Springfield is the priciest of the group at $1,500. Norwich is the cheapest at $1,400.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| New Haven, CTthis page | $670 – $2,350 | $1,500 | |
| Waterbury, CT20 miles | $650 – $2,300 | $1,450 | −2% |
| Bridgeport, CT30 miles | $670 – $2,350 | $1,500 | level |
| Hartford, CT30 miles | $650 – $2,250 | $1,450 | −3% |
| Norwich, CT40 miles | $620 – $2,150 | $1,400 | −7% |
| Springfield, MA60 miles | $670 – $2,350 | $1,500 | +1% |
| Connecticut (statewide) | $660 – $2,300 | $1,500 | −1% |
| United States | $600 – $2,100 | $1,350 | −10% |
Out of the 300 metros we cover, New Haven ranks #74 for the cost of this job (#1 is the most expensive). Statewide, New Haven is 1% above the Connecticut figure.
Elsewhere in Connecticut
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Hartford, CT | 599,770 jobs | $650 – $2,250 | $1,450 | −3% |
| Bridgeport, CT | 404,180 jobs | $670 – $2,350 | $1,500 | level |
| Waterbury, CT | 160,710 jobs | $650 – $2,300 | $1,450 | −2% |
| Norwich, CT | 126,450 jobs | $620 – $2,150 | $1,400 | −7% |
Metros of a similar size
Big cities and small ones price differently, so here is New Haven against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Lexington, KY | 286,910 jobs | $600 – $2,100 | $1,350 | −11% |
| Reno, NV | 275,680 jobs | $640 – $2,250 | $1,450 | −3% |
| Portland, ME | 288,480 jobs | $610 – $2,150 | $1,400 | −8% |
| Fayetteville, AR | 275,180 jobs | $530 – $1,850 | $1,200 | −21% |
Who does the work: New Haven trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For New Haven the blend is 1.24.
For construction laborers (47-2061, weighted 50%) the local median is $29.02 an hour, which is 28% above the national $22.66. The middle half of them earn between $23.36 and $35.51 an hour. BLS counts 1,220 of them working in the area, 43.4 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
Operating engineers and other construction equipment operators (47-2073), 30% of the weighting: a median of $38.38 an hour, 33% above the US median of $28.78. The middle half of them earn between $32.92 and $50.03 an hour. About 450 work in the metro. That is 16.0 per 10,000 jobs, compared with 30.7 nationally, so expect fewer local crews to bid.
Pipelayers (47-2151) carry 20% of the labor weighting. BLS does not publish this trade for the New Haven metro, so we used the national median: $23.56 an hour against $23.56 for the US. The middle half of them earn between $21.15 and $29.52 an hour.
A quick sensitivity check: moving the lead trade (construction laborers) from the median to the 75th percentile wage adds about $100 to the midpoint estimate; the 25th percentile takes off about $90. That is a swing of roughly 5.8% to 6.7% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
New Haven has 281,410 jobs in total (BLS, May 2025), ranking 91st by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 50% | $23.36 | $29.02 | $35.51 | $22.66 | 1.28 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $32.92 | $38.38 | $50.03 | $28.78 | 1.33 | metro |
| Pipelayers (47-2151) | 20% | $21.15 | $23.56 | $29.52 | $23.56 | 1.00 | US |
| Blended | 100% | 1.24 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,150 to $1,850 for New Haven, CT is attached.
Take this estimate with you: PDF report, $9
The report lays out the french drain numbers for New Haven, CT line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
French drain in New Haven: your questions
+How much does it cost to install a French drain in New Haven?
For 60 linear ft, expect $670 to $2,350 in the New Haven area. A standard-spec job lands at $1,150 to $1,850. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for French drain in New Haven?
About $11 to $39 per linear ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $10 to $35.
+Is French drain cheaper in New Haven or Waterbury?
Waterbury is 20 miles away. The midpoint for 60 linear ft there is $1,450, which is 2% less than New Haven ($1,500). Wage and materials indexes both feed that gap.
+How much of the bill is labor in New Haven?
About 58% at the midpoint, or $870 out of $1,500. Materials are 42% and permits 0%. Nationally, labor is 52%.
+What would side yard (60 linear ft) cost in New Haven?
$670 to $2,350. Pick a different size in the estimator above to get your own number.
+Does French drain need a permit in New Haven?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the New Haven area (our national range of $0 to $0 scaled by the local price level).
+Is New Haven expensive for French drain compared with the rest of Connecticut?
New Haven is 1% above the Connecticut statewide estimate ($1,500 at the midpoint). We cover 5 metros in Connecticut; see the state page to compare them.
+What do construction laborers earn in New Haven?
The BLS median is $29.02 an hour in the New Haven area, compared with $22.66 nationally. The 25th to 75th percentile range is $23.36 to $35.51.
+What do basic and premium French drain work cost in New Haven?
For 60 linear ft, basic work runs $670 to $1,350 and premium work $1,650 to $2,350. Basic means: shallow yard drain, easy digging. Premium means: deep or long drain, hard soil, dry well or sump discharge.
+When is the best time to install a French drain in New Haven?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through November. July and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
French drain near New Haven
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a French Drain Cost? (2026) (accessed November 4, 2026)
- Cost to Renovate: Renovation Labor Report 2026: Where the Money Goes (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = 48% of the installed price, from Cost to Renovate's mid-range 'Outdoor Living' category split (44% labor, 48% materials). It is a category average, not a French-drain figure, so the materials line here is a rough one.