French drain cost in Dothan, AL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (60 linear ft)
- $510 – $1,800
- Per linear ft
- $8.55 – $30
- before permit
- Versus US midpoint
- −14%
- US $1,350
- Rank of 300 metros
- #293
- 1 = most expensive
If you want to install a French drain in Dothan, plan on $510 to $1,800 for 60 linear ft, all in. Per linear ft, that is $8.55 to $30 for materials and labor, with the permit on top. The local midpoint runs 14% lower than the national one. Construction laborers earn a median of $15.39 an hour in the Dothan area, 32% below the US median of $22.66.
Estimate your french drain cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 60 linear ft in Dothan, AL, standard level
$900 to $1,400
About $15 to $23.50 per linear ft before permits. Labor is about 46% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $490 | $760 |
| Labor | $410 | $650 |
| Permits and fees | $0 | $0 |
| Total | $900 | $1,400 |
Cost breakdown for 60 linear ft in Dothan, AL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $280 | $620 | $970 | 54% |
| Labor | $240 | $530 | $830 | 46% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $510 | $1,150 | $1,800 | 100% |
Why Dothan prices look the way they do
We price the labor side from BLS wage data for 3 trades: construction laborers at 50%, operating engineers and other construction equipment operators at 30%, pipelayers at 20%. Weighted together, Dothan wages are 0.76 times the national level. Labor makes up about 46% of the midpoint estimate (52% at national prices).
On the materials line, the BEA goods price index for the Dothan metro is 96.4 (US = 100). The midpoint materials bill for 60 linear ft comes to $620, compared with $650 at national prices. Permit and inspection fees are scaled by the broader index (83.8) and land at $0 to $0.
Data note: 20% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Dothan. The wage table below marks each row.
Dothan against nearby metros and the rest of Alabama
Same job, same size (60 linear ft), priced for the nearest metros. Crestview is the priciest of the group at $1,250. Albany is the cheapest at $1,150.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Dothan, ALthis page | $510 – $1,800 | $1,150 | |
| Panama City, FL70 miles | $550 – $1,950 | $1,250 | +8% |
| Crestview, FL70 miles | $560 – $1,950 | $1,250 | +10% |
| Albany, GA85 miles | $510 – $1,800 | $1,150 | level |
| Auburn, AL85 miles | $530 – $1,850 | $1,200 | +3% |
| Columbus, GA90 miles | $530 – $1,850 | $1,200 | +3% |
| Alabama (statewide) | $530 – $1,850 | $1,200 | +3% |
| United States | $600 – $2,100 | $1,350 | +17% |
Across 300 US metros, Dothan comes in at #293 from the top. The priciest is San Francisco, CA at $1,900; the cheapest is McAllen, TX at $1,100 (midpoints, 60 linear ft). Statewide, Dothan is 3% below the Alabama figure.
Other Alabama metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Birmingham, AL | 520,290 jobs | $550 – $1,950 | $1,250 | +7% |
| Huntsville, AL | 266,650 jobs | $540 – $1,900 | $1,200 | +5% |
| Mobile, AL | 172,550 jobs | $530 – $1,850 | $1,200 | +3% |
| Montgomery, AL | 165,550 jobs | $530 – $1,850 | $1,200 | +2% |
| Tuscaloosa, AL | 108,460 jobs | $530 – $1,850 | $1,200 | +3% |
| Daphne, AL | 87,120 jobs | $540 – $1,900 | $1,200 | +4% |
Cities with a workforce like Dothan's
Big cities and small ones price differently, so here is Dothan against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Decatur, AL | 61,240 jobs | $540 – $1,900 | $1,200 | +4% |
| Sheboygan, WI | 60,630 jobs | $670 – $2,350 | $1,500 | +30% |
| Santa Fe, NM | 61,770 jobs | $560 – $1,950 | $1,250 | +8% |
| Jonesboro, AR | 60,620 jobs | $510 – $1,800 | $1,150 | level |
Dothan labor market for French drain
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Dothan is 0.76 times the national level.
Construction laborers (47-2061), 50% of the weighting: a median of $15.39 an hour, 32% below the US median of $22.66. The middle half of them earn between $12.40 and $18.76 an hour. About 600 work in the metro. That is 98.8 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
For operating engineers and other construction equipment operators (47-2073, weighted 30%) the local median is $22.66 an hour, which is 21% below the national $28.78. The middle half of them earn between $18.22 and $26.45 an hour. BLS counts 200 of them working in the area, 32.9 for every 10,000 jobs (US: 30.7), so the local bench is about average.
Pipelayers (47-2151) carry 20% of the labor weighting. BLS does not publish this trade for the Dothan metro, so we used the Alabama statewide median: $21.42 an hour against $23.56 for the US. The middle half of them earn between $17.52 and $23.90 an hour.
Quotes come from real crews, not medians. If the construction laborers on your job are paid at the 75th percentile ($18.76 an hour) instead of the median, the labor line grows by about $50. At the 25th percentile ($12.40) it shrinks by about $45. The total moves by 4.5% or 4.0%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 60,720 jobs in the Dothan area. That makes it the 284th largest of the 300 metros we cover, with 0.04% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 50% | $12.40 | $15.39 | $18.76 | $22.66 | 0.68 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $18.22 | $22.66 | $26.45 | $28.78 | 0.79 | metro |
| Pipelayers (47-2151) | 20% | $17.52 | $21.42 | $23.90 | $23.56 | 0.91 | state |
| Blended | 100% | 0.76 | |||||
What nearby projects cost in Dothan
Because every project leans on different trades, Dothan's wage level does not move all prices equally. Against the US midpoint, sod installation runs −11% and sprinkler system −15%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Retaining wall | 200 sq ft of wall face | $5,950 – $11,900 | −13% |
| Gravel driveway | 1,000 sq ft | $2,100 – $8,650 | −15% |
| Sod installation | 1,500 sq ft | $1,350 – $2,900 | −11% |
| Concrete slab | 400 sq ft | $2,100 – $4,500 | −14% |
| Sprinkler system | 4,000 sq ft of lawn | $3,400 – $8,450 | −15% |
| Inground pool | 450 sq ft | $30,600 – $95,900 | −15% |
Climate in Dothan: timing your French drain job
We use NOAA's 1991-2020 climate normals for Dothan Rgnl Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
September through May is the stretch where digging, grading and setting material in the ground runs into the fewest weather problems in Dothan (9 of 12 months). June, July and August have an average daytime high of 90°F or more.
Dothan gets about 54 inches of precipitation in a normal year. The wettest months are June, July and August (6.2 inches in August). Inside the workable window, May and October are the driest, at 2.9 and 2.7 inches. The station averages about 89 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 62 | 40 | 4.8 | Workable |
| Feb | 66 | 43 | 4.8 | Workable |
| Mar | 73 | 49 | 4.7 | Workable |
| Apr | 79 | 55 | 4.8 | Workable |
| May | 87 | 64 | 2.9 | Workable |
| Jun | 91 | 71 | 5.1 | Hot |
| Jul | 93 | 73 | 6.0 | Hot |
| Aug | 92 | 72 | 6.2 | Hot |
| Sep | 88 | 67 | 3.3 | Workable |
| Oct | 81 | 57 | 2.7 | Workable |
| Nov | 71 | 47 | 3.9 | Workable |
| Dec | 64 | 42 | 4.8 | Workable |
Why two Dothan quotes can differ
Where the water goes
A sump pump adds $500-$1,800 and a dry well $50-$3,000+. Discharging to a storm drain can mean extra permit fees.
Depth and soil
Rocky or clay soil and long trenches raise excavation time.
Crawl space drains
A crawl space French drain is $2,000-$8,000 installed.
Cost by quality level and size in Dothan
Three bands are cut from the same cited range and localized for Dothan wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$510 to $1,050
Shallow yard drain, easy digging
Standard
$900 to $1,400
Standard drain with fabric, gravel and a pop-up outlet
Premium
$1,300 to $1,800
Deep or long drain, hard soil, dry well or sump discharge
| Size | Basic | Standard | Premium |
|---|---|---|---|
| short run (30 linear ft) | $260 – $510 | $450 – $710 | $640 – $900 |
| side yard (60 linear ft) | $510 – $1,050 | $900 – $1,400 | $1,300 – $1,800 |
| long run (120 linear ft) | $1,050 – $2,050 | $1,800 – $2,850 | $2,550 – $3,600 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $900 to $1,400 for Dothan, AL is attached.
Detailed french drain report for Dothan, AL, $9
Multi-page report for Dothan, AL: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
French drain in Dothan: your questions
+How much does it cost to install a French drain in Dothan?
For 60 linear ft, expect $510 to $1,800 in the Dothan area. A standard-spec job lands at $900 to $1,400. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for French drain in Dothan?
About $8.55 to $30 per linear ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $10 to $35.
+Is French drain cheaper in Dothan or Panama City?
Panama City is 70 miles away. The midpoint for 60 linear ft there is $1,250, which is 8% more than Dothan ($1,150). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Dothan?
About 46% at the midpoint, or $530 out of $1,150. Materials are 54% and permits 0%. Nationally, labor is 52%.
+What would side yard (60 linear ft) cost in Dothan?
$510 to $1,800. Pick a different size in the estimator above to get your own number.
+Does French drain need a permit in Dothan?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Dothan area (our national range of $0 to $0 scaled by the local price level).
+Is Dothan expensive for French drain compared with the rest of Alabama?
Dothan is 3% below the Alabama statewide estimate ($1,200 at the midpoint). We cover 9 metros in Alabama; see the state page to compare them.
+What do construction laborers earn in Dothan?
The BLS median is $15.39 an hour in the Dothan area, compared with $22.66 nationally. The 25th to 75th percentile range is $12.40 to $18.76.
+What do basic and premium French drain work cost in Dothan?
For 60 linear ft, basic work runs $510 to $1,050 and premium work $1,300 to $1,800. Basic means: shallow yard drain, easy digging. Premium means: deep or long drain, hard soil, dry well or sump discharge.
+When is the best time to install a French drain in Dothan?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. May and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
French drain near Dothan
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a French Drain Cost? (2026) (accessed November 4, 2026)
- Cost to Renovate: Renovation Labor Report 2026: Where the Money Goes (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = 48% of the installed price, from Cost to Renovate's mid-range 'Outdoor Living' category split (44% labor, 48% materials). It is a category average, not a French-drain figure, so the materials line here is a rough one.