Skip to content
CostLocal

Composite deck cost in Harrisburg, PA

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (300 sq ft)
$11,900 – $23,800
Per sq ft
$39.50 – $79
before permit
Versus US midpoint
−1%
US $18,100
Rank of 300 metros
#120
1 = most expensive

Local price for a composite deck in the Harrisburg area: $11,900 to $23,800 for 300 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Carpenters earn a median of $27.74 an hour in the Harrisburg area, 5% below the US median of $29.12.

Estimate your composite deck cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Mid-grade capped boards with railing and stairs

Add-ons

Estimated cost for 300 sq ft in Harrisburg, PA, standard level

$15,500 to $20,200

About $51.50 to $67 per sq ft before permits. Labor is about 59% of the bill.

Cost breakdown
PartLowHigh
Materials$6,300$8,200
Labor$9,100$11,900
Permits and fees$80$120
Total$15,500$20,200
Save and get a PDF report

Cost breakdown for 300 sq ft in Harrisburg, PA

Part of the jobLowMidpointHighShare
Materials$4,850$7,250$9,65041%
Labor$7,000$10,500$14,00059%
Permits and fees$50$100$1501%
Total$11,900$17,900$23,800100%

Where the Harrisburg price comes from

The wage side of the estimate leans on carpenters, who do 80% of the hours on a typical job. Their local median is $27.74 an hour. Add the other trades involved and the blended wage index for Harrisburg is 0.97 (US = 1.00), which puts labor at 59% of the total.

Materials are scaled with BEA's regional price parity for goods. Harrisburg is at 100.7 against 100 for the US, so a materials line of $7,200 nationally becomes $7,250 here (midpoint, 300 sq ft). Permits follow the all-items index of 98.7: $50 to $150.

The best months for composite deck in Harrisburg

Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Harrisburg 1 Ne (in the city). They are 30-year averages, so any one year can run hotter, colder or wetter.

For exterior installation, the comfortable months in Harrisburg are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.

In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.

Harrisburg gets about 45 inches of precipitation in a normal year, including roughly 24 inches of snow. The wettest months are July, August and September (4.8 inches in July). Inside the workable window, October and November are the driest, at 3.8 and 2.9 inches. The station averages about 18 days a year at 90°F or above.

We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.

Monthly normals, Harrisburg 1 Ne (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan37222.9Cold
Feb40232.8Cold
Mar48303.9Workable
Apr61403.9Workable
May72514.0Workable
Jun81604.0Workable
Jul85654.8Workable
Aug83624.3Workable
Sep75554.6Workable
Oct63433.8Workable
Nov51342.9Workable
Dec41273.4Cold

Why two Harrisburg quotes can differ

  • Board grade

    Composite materials run $16-$32 per sq ft and the installed price is $40-$80 per sq ft, including the substructure (HomeGuide).

  • Labor

    Labor for composite is $24-$48 per sq ft, higher than wood because the boards need extra parts and more careful assembly.

  • Drainage

    Ground-level decks over poorly draining yards may need $1,000-$4,000 of drainage work first.

Related projects, priced for Harrisburg

Jobs that often go together with composite deck are priced below at their usual sizes, using the same Harrisburg wage and price inputs. Compared with national midpoints, paver patio comes out highest (+5%) and wood deck lowest (−1%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Wood deck300 sq ft$7,500 – $15,000−1%
Concrete patio300 sq ft$1,250 – $4,100+2%
Paver patio300 sq ft$3,150 – $5,700+5%
Gutters160 linear ft$1,300 – $4,200level

Who does the work: Harrisburg trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Harrisburg the blend is 0.97.

Carpenters (47-2031), 80% of the weighting: a median of $27.74 an hour, 5% below the US median of $29.12. The middle half of them earn between $23.14 and $34.00 an hour. About 1,320 work in the metro. That is 39.4 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.

For construction laborers (47-2061, weighted 20%) the local median is $23.88 an hour, which is 5% above the national $22.66. The middle half of them earn between $22.00 and $27.94 an hour. BLS counts 1,370 of them working in the area, 40.9 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.

A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $1,850 to the midpoint estimate; the 25th percentile takes off about $1,350. That is a swing of roughly 7.6% to 10.4% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Harrisburg-Carlisle has 335,010 jobs in total (BLS, May 2025), ranking 78th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)80%$23.14$27.74$34.00$29.120.95metro
Construction laborers (47-2061)20%$22.00$23.88$27.94$22.661.05metro
Blended100%0.97

Harrisburg against nearby metros and the rest of Pennsylvania

Same job, same size (300 sq ft), priced for the nearest metros. York is the priciest of the group at $18,300. Chambersburg is the cheapest at $16,400.

Comparison with nearby areas
AreaRangeMidpointvs. here
Harrisburg, PAthis page$11,900 – $23,800$17,900
York, PA35 miles$12,200 – $24,500$18,300+3%
Chambersburg, PA45 miles$10,900 – $21,900$16,400−8%
Lancaster, PA45 miles$11,700 – $23,400$17,500−2%
State College, PA60 miles$11,800 – $23,700$17,700−1%
Reading, PA60 miles$11,600 – $23,200$17,400−2%
Pennsylvania (statewide)$12,000 – $24,000$18,000+1%
United States$12,100 – $24,200$18,100+1%

Out of the 300 metros we cover, Harrisburg ranks #120 for the cost of this job (#1 is the most expensive). Statewide, Harrisburg is 1% below the Pennsylvania figure.

Elsewhere in Pennsylvania

Pennsylvania metros compared with Harrisburg
MetroSizeRangeMidpointvs. here
Philadelphia, PA2,897,830 jobs$12,300 – $24,600$18,400+3%
Pittsburgh, PA1,114,490 jobs$12,200 – $24,500$18,400+3%
Allentown, PA377,180 jobs$12,000 – $24,100$18,100+1%
Scranton, PA255,620 jobs$12,100 – $24,200$18,100+2%
Lancaster, PA252,230 jobs$11,700 – $23,400$17,500−2%
York, PA183,590 jobs$12,200 – $24,500$18,300+3%

Metros of a similar size

Big cities and small ones price differently, so here is Harrisburg against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Bakersfield, CA338,230 jobs$13,100 – $26,300$19,700+10%
Oxnard, CA323,890 jobs$13,900 – $28,000$20,900+17%
El Paso, TX339,120 jobs$9,650 – $19,400$14,500−19%
Akron, OH319,560 jobs$12,100 – $24,300$18,200+2%

Optional extras in Harrisburg

Add-ons start from national price ranges and are scaled by 0.99 for Harrisburg, which is the average of the area's wage index (0.97) and goods price index (1.01). The estimator above can add them to your total.

Add-on prices
Add-onLocal range
Add a deck railing (approx. 0.3 ft per sq ft)$1,800 – $5,350

Cost by quality level and size in Harrisburg

The cited range is split into basic, standard and premium bands, then scaled to Harrisburg. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from 10x12 (120 sq ft) to 20x20 (400 sq ft).

Basic

$11,900 to $16,700

Entry-level composite boards, low deck, simple shape

Standard

$15,500 to $20,200

Mid-grade capped boards with railing and stairs

Premium

$19,000 to $23,800

Premium capped or PVC boards, multi-level, hidden fasteners

Cost by size and quality level
SizeBasicStandardPremium
10x12 (120 sq ft)$4,800 – $6,700$6,250 – $8,150$7,700 – $9,600
12x12 (144 sq ft)$5,750 – $8,050$7,450 – $9,800$9,200 – $11,500
16x20 (320 sq ft)$12,700 – $17,800$16,500 – $21,600$20,300 – $25,400
20x20 (400 sq ft)$15,800 – $22,200$20,600 – $26,900$25,400 – $31,700

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $15,500 to $20,200 for Harrisburg, PA is attached.

A detailed PDF report of this estimate, $9

Multi-page report for Harrisburg, PA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Composite deck in Harrisburg: your questions

+How much does it cost to build a composite deck in Harrisburg?

For 300 sq ft, expect $11,900 to $23,800 in the Harrisburg area. A standard-spec job lands at $15,500 to $20,200. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for composite deck in Harrisburg?

About $39.50 to $79 per sq ft for materials and labor, plus $50 to $150 for the permit if one is needed. The US range is $40 to $80.

+Is composite deck cheaper in Harrisburg or York?

York is 35 miles away. The midpoint for 300 sq ft there is $18,300, which is 3% more than Harrisburg ($17,900). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Harrisburg?

About 59% at the midpoint, or $10,500 out of $17,900. Materials are 41% and permits 1%. Nationally, labor is 60%.

+What would 16x20 (320 sq ft) cost in Harrisburg?

$12,700 to $25,400. Pick a different size in the estimator above to get your own number.

+Does composite deck need a permit in Harrisburg?

Often, but rules are set by your city or county building office, so call before you hire. Budget $50 to $150 for fees in the Harrisburg area (our national range of $50 to $150 scaled by the local price level).

+Is Harrisburg expensive for composite deck compared with the rest of Pennsylvania?

Harrisburg is 1% below the Pennsylvania statewide estimate ($18,000 at the midpoint). We cover 12 metros in Pennsylvania; see the state page to compare them.

+What do carpenters earn in Harrisburg?

The BLS median is $27.74 an hour in the Harrisburg area, compared with $29.12 nationally. The 25th to 75th percentile range is $23.14 to $34.00.

+What do basic and premium composite deck work cost in Harrisburg?

For 300 sq ft, basic work runs $11,900 to $16,700 and premium work $19,000 to $23,800. Basic means: entry-level composite boards, low deck, simple shape. Premium means: premium capped or PVC boards, multi-level, hidden fasteners.

+When is the best time to build a composite deck in Harrisburg?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. October and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "add a deck railing" add in Harrisburg?

$1,800 to $5,350 for 300 sq ft, from a national range scaled by the local wage and goods indexes.

Composite deck near Harrisburg

Composite deck: all pricesComposite deck in PennsylvaniaAll projects in HarrisburgPennsylvania cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.