Chain-link fence cost in Flint, MI
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $1,550 – $6,550
- Per linear ft
- $10 – $43
- before permit
- Versus US midpoint
- +6%
- US $3,850
- Rank of 300 metros
- #72
- 1 = most expensive
Local price for a chain-link fence in the Flint area: $1,550 to $6,550 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 6% higher than the US figure. Construction laborers earn a median of $27.49 an hour in the Flint area, 21% above the US median of $22.66.
Estimate your chain-link fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Flint, MI, standard level
$3,050 to $5,050
About $20 to $33 per linear ft before permits. Labor is about 65% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,550 |
| Labor | $1,850 | $3,400 |
| Permits and fees | $70 | $110 |
| Total | $3,050 | $5,050 |
Cost breakdown for 150 linear ft in Flint, MI
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $840 | $1,350 | $1,850 | 33% |
| Labor | $680 | $2,650 | $4,600 | 65% |
| Permits and fees | $35 | $90 | $140 | 2% |
| Total | $1,550 | $4,050 | $6,550 | 100% |
Why Flint prices look the way they do
Labor is 65% of the midpoint bill here, against 60% nationally. The mix of trades behind this job is construction laborers (60%), carpenters (40%). We weight each trade's local median wage by that share and compare it with the national median. In Flint the blended ratio comes out at 1.13.
Materials are scaled with BEA's regional price parity for goods. Flint is at 93.7 against 100 for the US, so a materials line of $1,450 nationally becomes $1,350 here (midpoint, 150 linear ft). Permits follow the all-items index of 93.0: $35 to $140.
The best months for chain-link fence in Flint
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Flint Bishop Intl Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Flint are April through November: 8 of 12. Outside them, January, February, March and December have an average daytime high under 45°F.
In January, February, March and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Flint gets about 32 inches of precipitation in a normal year, including roughly 52 inches of snow. The wettest months are May, July and August (3.7 inches in May). Inside the workable window, October and November are the driest, at 2.8 and 2.3 inches. The station averages about 11 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 30 | 16 | 2.0 | Cold |
| Feb | 33 | 17 | 1.7 | Cold |
| Mar | 43 | 25 | 2.0 | Cold |
| Apr | 57 | 35 | 3.1 | Workable |
| May | 69 | 46 | 3.7 | Workable |
| Jun | 78 | 56 | 3.1 | Workable |
| Jul | 82 | 60 | 3.4 | Workable |
| Aug | 80 | 58 | 3.2 | Workable |
| Sep | 73 | 50 | 2.9 | Workable |
| Oct | 60 | 40 | 2.8 | Workable |
| Nov | 47 | 31 | 2.3 | Workable |
| Dec | 35 | 23 | 1.9 | Cold |
Is Flint cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $3,750 to $4,200 across Flint and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Flint, MIthis page | $1,550 – $6,550 | $4,050 | |
| Saginaw, MI30 miles | $1,500 – $6,150 | $3,850 | −6% |
| Detroit, MI35 miles | $1,650 – $6,800 | $4,200 | +4% |
| Lansing, MI50 miles | $1,600 – $6,650 | $4,100 | +1% |
| Ann Arbor, MI55 miles | $1,550 – $6,350 | $3,950 | −3% |
| Grand Rapids, MI100 miles | $1,500 – $6,000 | $3,750 | −8% |
| Michigan (statewide) | $1,550 – $6,200 | $3,850 | −5% |
| United States | $1,550 – $6,150 | $3,850 | −5% |
Out of the 300 metros we cover, Flint ranks #72 for the cost of this job (#1 is the most expensive). Statewide, Flint is 5% above the Michigan figure.
Elsewhere in Michigan
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Detroit, MI | 1,904,530 jobs | $1,650 – $6,800 | $4,200 | +4% |
| Grand Rapids, MI | 598,260 jobs | $1,500 – $6,000 | $3,750 | −8% |
| Ann Arbor, MI | 219,730 jobs | $1,550 – $6,350 | $3,950 | −3% |
| Lansing, MI | 217,180 jobs | $1,600 – $6,650 | $4,100 | +1% |
| Kalamazoo, MI | 121,790 jobs | $1,500 – $6,250 | $3,900 | −4% |
| Saginaw, MI | 80,000 jobs | $1,500 – $6,150 | $3,850 | −6% |
Metros of a similar size
Big cities and small ones price differently, so here is Flint against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Evansville, IN | 135,250 jobs | $1,550 – $6,450 | $4,000 | −1% |
| College Station, TX | 134,040 jobs | $1,350 – $5,150 | $3,250 | −20% |
| Rockford, IL | 137,650 jobs | $1,600 – $6,900 | $4,250 | +5% |
| South Bend, IN | 131,670 jobs | $1,500 – $6,250 | $3,900 | −4% |
Planning more than one job in Flint?
Jobs that often go together with chain-link fence are priced below at their usual sizes, using the same Flint wage and price inputs. Compared with national midpoints, gravel driveway comes out highest (+8%) and vinyl fence lowest (−2%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $3,100 – $7,650 | level |
| Vinyl fence | 150 linear ft | $4,400 – $8,950 | −2% |
| Aluminum fence | 150 linear ft | $3,900 – $11,500 | +1% |
| Gravel driveway | 1,000 sq ft | $2,750 – $11,000 | +8% |
Specs and site conditions that change a Flint bid
Coating
Black or green vinyl-coated mesh costs more than galvanized.
Gates
Gates are $80-$1,000+ before installation. Rolling or slide gates are the expensive end.
Survey
A land survey ($300-$900) is worth it before you put a fence near a boundary.
Who does the work: Flint trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Flint the blend is 1.13.
For construction laborers (47-2061, weighted 60%) the local median is $27.49 an hour, which is 21% above the national $22.66. The middle half of them earn between $21.89 and $30.25 an hour. BLS counts 980 of them working in the area, 72.6 for every 10,000 jobs (US: 70.5), so the local bench is about average.
Carpenters (47-2031), 40% of the weighting: a median of $29.50 an hour, in line with the US median of $29.12. The middle half of them earn between $23.41 and $33.59 an hour. About 330 work in the metro. That is 24.4 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
A quick sensitivity check: moving the lead trade (construction laborers) from the median to the 75th percentile wage adds about $170 to the midpoint estimate; the 25th percentile takes off about $340. That is a swing of roughly 8.5% to 4.2% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Flint has 135,040 jobs in total (BLS, May 2025), ranking 163rd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 60% | $21.89 | $27.49 | $30.25 | $22.66 | 1.21 | metro |
| Carpenters (47-2031) | 40% | $23.41 | $29.50 | $33.59 | $29.12 | 1.01 | metro |
| Blended | 100% | 1.13 | |||||
Optional extras in Flint
Add-ons start from national price ranges and are scaled by 1.04 for Flint, which is the average of the area's wage index (1.13) and goods price index (0.94). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $85 – $1,050 |
Pick a size, pick a tier: chain-link fence pricing in Flint
The cited range is split into basic, standard and premium bands, then scaled to Flint. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$1,550 to $3,550
4-ft galvanized, front yard
Standard
$3,050 to $5,050
6-ft galvanized backyard fence
Premium
$4,550 to $6,550
Vinyl-coated, 8 ft, extra gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $1,050 – $2,400 | $2,050 – $3,400 | $3,050 – $4,400 |
| 150 ft (150 linear ft) | $1,550 – $3,550 | $3,050 – $5,050 | $4,550 – $6,550 |
| 200 ft (200 linear ft) | $2,050 – $4,700 | $4,050 – $6,700 | $6,050 – $8,700 |
| full lot (300 linear ft) | $3,100 – $7,050 | $6,050 – $10,000 | $9,000 – $13,000 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $3,050 to $5,050 for Flint, MI is attached.
Detailed chain-link fence report for Flint, MI, $9
The report lays out the chain-link fence numbers for Flint, MI line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Chain-link fence in Flint: your questions
+How much does it cost to install a chain-link fence in Flint?
For 150 linear ft, expect $1,550 to $6,550 in the Flint area. A standard-spec job lands at $3,050 to $5,050. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for chain-link fence in Flint?
About $10 to $43 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $10 to $40.
+Is chain-link fence cheaper in Flint or Saginaw?
Saginaw is 30 miles away. The midpoint for 150 linear ft there is $3,850, which is 6% less than Flint ($4,050). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Flint?
About 65% at the midpoint, or $2,650 out of $4,050. Materials are 33% and permits 2%. Nationally, labor is 60%.
+What would 200 ft (200 linear ft) cost in Flint?
$2,050 to $8,700. Pick a different size in the estimator above to get your own number.
+Does chain-link fence need a permit in Flint?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Flint area (our national range of $40 to $150 scaled by the local price level).
+Is Flint expensive for chain-link fence compared with the rest of Michigan?
Flint is 5% above the Michigan statewide estimate ($3,850 at the midpoint). We cover 10 metros in Michigan; see the state page to compare them.
+What do construction laborers earn in Flint?
The BLS median is $27.49 an hour in the Flint area, compared with $22.66 nationally. The 25th to 75th percentile range is $21.89 to $30.25.
+What do basic and premium chain-link fence work cost in Flint?
For 150 linear ft, basic work runs $1,550 to $3,550 and premium work $4,550 to $6,550. Basic means: 4-ft galvanized, front yard. Premium means: vinyl-coated, 8 ft, extra gates.
+When is the best time to install a chain-link fence in Flint?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through November. October and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Flint?
$85 to $1,050, from a national range scaled by the local wage and goods indexes.
Chain-link fence near Flint
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Chain-Link Fence Cost? (2026) (accessed November 4, 2026)
- Visual Fence Pro: Chain Link Fence Cost & Pricing Guide for Contractors (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = Visual Fence Pro's $6-$13 per foot for residential galvanized 4-6 ft fence (taller or vinyl-coated fence costs more).