Chain-link fence cost in Monroe, LA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $1,350 – $5,100
- Per linear ft
- $8.75 – $33
- before permit
- Versus US midpoint
- −16%
- US $3,850
- Rank of 300 metros
- #286
- 1 = most expensive
Local price for a chain-link fence in the Monroe area: $1,350 to $5,100 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 16% lower than the US figure. Construction laborers earn a median of $17.24 an hour in the Monroe area, 24% below the US median of $22.66.
Estimate your chain-link fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Monroe, LA, standard level
$2,450 to $3,950
About $16 to $26 per linear ft before permits. Labor is about 56% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,550 |
| Labor | $1,250 | $2,350 |
| Permits and fees | $60 | $100 |
| Total | $2,450 | $3,950 |
Cost breakdown for 150 linear ft in Monroe, LA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $840 | $1,350 | $1,850 | 41% |
| Labor | $470 | $1,800 | $3,150 | 56% |
| Permits and fees | $35 | $80 | $130 | 2% |
| Total | $1,350 | $3,200 | $5,100 | 100% |
What is behind the Monroe number
We price the labor side from BLS wage data for 2 trades: construction laborers at 60%, carpenters at 40%. Weighted together, Monroe wages are 0.78 times the national level. Labor makes up about 56% of the midpoint estimate (60% at national prices).
Materials are scaled with BEA's regional price parity for goods. Monroe is at 93.7 against 100 for the US, so a materials line of $1,450 nationally becomes $1,350 here (midpoint, 150 linear ft). Permits follow the all-items index of 83.6: $35 to $130.
Extras that change the Monroe total
Add-ons start from national price ranges and are scaled by 0.86 for Monroe, which is the average of the area's wage index (0.78) and goods price index (0.94). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $70 – $860 |
The best months for chain-link fence in Monroe
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Monroe Rgnl Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Monroe are September through May: 9 of 12. Outside them, June, July and August have an average daytime high of 90°F or more.
Monroe gets about 55 inches of precipitation in a normal year. The wettest months are March, April and December (5.8 inches in April). Inside the workable window, September and November are the driest, at 3.5 and 4.2 inches. The station averages about 97 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 57 | 37 | 5.2 | Workable |
| Feb | 61 | 40 | 4.7 | Workable |
| Mar | 69 | 47 | 5.2 | Workable |
| Apr | 77 | 54 | 5.8 | Workable |
| May | 84 | 63 | 4.4 | Workable |
| Jun | 91 | 70 | 4.5 | Hot |
| Jul | 93 | 73 | 3.9 | Hot |
| Aug | 94 | 71 | 3.6 | Hot |
| Sep | 89 | 66 | 3.5 | Workable |
| Oct | 79 | 54 | 5.0 | Workable |
| Nov | 67 | 44 | 4.2 | Workable |
| Dec | 59 | 39 | 5.2 | Workable |
Who does the work: Monroe trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Monroe the blend is 0.78.
For construction laborers (47-2061, weighted 60%) the local median is $17.24 an hour, which is 24% below the national $22.66. The middle half of them earn between $16.44 and $21.89 an hour. BLS counts 860 of them working in the area, 98.3 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
Carpenters (47-2031), 40% of the weighting: a median of $23.27 an hour, 20% below the US median of $29.12. The middle half of them earn between $18.57 and $26.63 an hour. About 360 work in the metro. That is 41.1 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.
A quick sensitivity check: moving the lead trade (construction laborers) from the median to the 75th percentile wage adds about $290 to the midpoint estimate; the 25th percentile takes off about $50. That is a swing of roughly 1.5% to 8.9% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Monroe has 87,500 jobs in total (BLS, May 2025), ranking 223rd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 60% | $16.44 | $17.24 | $21.89 | $22.66 | 0.76 | metro |
| Carpenters (47-2031) | 40% | $18.57 | $23.27 | $26.63 | $29.12 | 0.80 | metro |
| Blended | 100% | 0.78 | |||||
Related projects, priced for Monroe
Jobs that often go together with chain-link fence are priced below at their usual sizes, using the same Monroe wage and price inputs. Compared with national midpoints, vinyl fence comes out highest (−10%) and gravel driveway lowest (−15%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,600 – $6,700 | −13% |
| Vinyl fence | 150 linear ft | $4,150 – $8,200 | −10% |
| Aluminum fence | 150 linear ft | $3,300 – $10,100 | −12% |
| Gravel driveway | 1,000 sq ft | $2,100 – $8,700 | −15% |
Is Monroe cheap or dear? The local comparison
Same job, same size (150 linear ft), priced for the nearest metros. Jackson is the priciest of the group at $3,350. Texarkana is the cheapest at $3,150.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Monroe, LAthis page | $1,350 – $5,100 | $3,200 | |
| Alexandria, LA95 miles | $1,350 – $5,100 | $3,250 | level |
| Shreveport, LA100 miles | $1,350 – $5,200 | $3,300 | +2% |
| Jackson, MS115 miles | $1,400 – $5,300 | $3,350 | +4% |
| Texarkana, TX135 miles | $1,300 – $4,950 | $3,150 | −2% |
| Little Rock, AR145 miles | $1,350 – $5,150 | $3,250 | +1% |
| Louisiana (statewide) | $1,350 – $5,250 | $3,300 | +3% |
| United States | $1,550 – $6,150 | $3,850 | +19% |
Out of the 300 metros we cover, Monroe ranks #286 for the cost of this job (#1 is the most expensive). Statewide, Monroe is 3% below the Louisiana figure.
Elsewhere in Louisiana
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| New Orleans, LA | 445,550 jobs | $1,400 – $5,350 | $3,350 | +4% |
| Baton Rouge, LA | 409,690 jobs | $1,400 – $5,450 | $3,400 | +6% |
| Lafayette, LA | 179,570 jobs | $1,350 – $5,200 | $3,300 | +2% |
| Shreveport, LA | 162,750 jobs | $1,350 – $5,200 | $3,300 | +2% |
| Lake Charles, LA | 101,690 jobs | $1,400 – $5,500 | $3,450 | +8% |
| Slidell, LA | 98,240 jobs | $1,350 – $5,250 | $3,300 | +2% |
Metros of a similar size
Big cities and small ones price differently, so here is Monroe against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Bloomington, IL | 88,110 jobs | $1,650 – $7,100 | $4,400 | +36% |
| Joplin, MO | 87,190 jobs | $1,450 – $5,850 | $3,650 | +13% |
| Florence, SC | 89,060 jobs | $1,450 – $5,650 | $3,550 | +10% |
| Daphne, AL | 87,120 jobs | $1,400 – $5,250 | $3,300 | +3% |
Monroe: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Monroe. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$1,350 to $2,850
4-ft galvanized, front yard
Standard
$2,450 to $3,950
6-ft galvanized backyard fence
Premium
$3,600 to $5,100
Vinyl-coated, 8 ft, extra gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $910 – $1,900 | $1,650 – $2,700 | $2,450 – $3,450 |
| 150 ft (150 linear ft) | $1,350 – $2,850 | $2,450 – $3,950 | $3,600 – $5,100 |
| 200 ft (200 linear ft) | $1,800 – $3,750 | $3,250 – $5,250 | $4,750 – $6,750 |
| full lot (300 linear ft) | $2,650 – $5,600 | $4,900 – $7,850 | $7,100 – $10,100 |
Specs and site conditions that change a Monroe bid
Height
A 4-ft fence runs $10-$20 per linear foot; 6- to 8-ft backyard fences run $15-$40+ (HomeGuide).
Coating
Black or green vinyl-coated mesh costs more than galvanized.
Gates
Gates are $80-$1,000+ before installation. Rolling or slide gates are the expensive end.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,450 to $3,950 for Monroe, LA is attached.
A detailed PDF report of this estimate, $9
The report lays out the chain-link fence numbers for Monroe, LA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Chain-link fence in Monroe: your questions
+How much does it cost to install a chain-link fence in Monroe?
For 150 linear ft, expect $1,350 to $5,100 in the Monroe area. A standard-spec job lands at $2,450 to $3,950. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for chain-link fence in Monroe?
About $8.75 to $33 per linear ft for materials and labor, plus $35 to $130 for the permit if one is needed. The US range is $10 to $40.
+Is chain-link fence cheaper in Monroe or Alexandria?
Alexandria is 95 miles away. The midpoint for 150 linear ft there is $3,250, which is 0% more than Monroe ($3,200). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Monroe?
About 56% at the midpoint, or $1,800 out of $3,200. Materials are 41% and permits 2%. Nationally, labor is 60%.
+What would 200 ft (200 linear ft) cost in Monroe?
$1,800 to $6,750. Pick a different size in the estimator above to get your own number.
+Does chain-link fence need a permit in Monroe?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $130 for fees in the Monroe area (our national range of $40 to $150 scaled by the local price level).
+Is Monroe expensive for chain-link fence compared with the rest of Louisiana?
Monroe is 3% below the Louisiana statewide estimate ($3,300 at the midpoint). We cover 9 metros in Louisiana; see the state page to compare them.
+What do construction laborers earn in Monroe?
The BLS median is $17.24 an hour in the Monroe area, compared with $22.66 nationally. The 25th to 75th percentile range is $16.44 to $21.89.
+What do basic and premium chain-link fence work cost in Monroe?
For 150 linear ft, basic work runs $1,350 to $2,850 and premium work $3,600 to $5,100. Basic means: 4-ft galvanized, front yard. Premium means: vinyl-coated, 8 ft, extra gates.
+When is the best time to install a chain-link fence in Monroe?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. September and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Monroe?
$70 to $860, from a national range scaled by the local wage and goods indexes.
Chain-link fence near Monroe
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Chain-Link Fence Cost? (2026) (accessed November 4, 2026)
- Visual Fence Pro: Chain Link Fence Cost & Pricing Guide for Contractors (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = Visual Fence Pro's $6-$13 per foot for residential galvanized 4-6 ft fence (taller or vinyl-coated fence costs more).