Skip to content
CostLocal

Chain-link fence cost in Georgia

Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.

Statewide range (150 linear ft)
$1,400 – $5,400
Per linear ft
$9.20 – $35
before permit
Versus US midpoint
−11%
US $3,850
Metros covered
10

Across Georgia, a chain-link fence costs about $1,400 to $5,400 for 150 linear ft. Statewide, that midpoint is 11% below the US figure of $3,850. Construction laborers earn a median $18.74 an hour in Georgia (US: $22.66).

Inside Georgia, the metros we cover range from $3,100 (Albany) to $3,550 (Atlanta) at the midpoint. Pick your closest city in the table for a tighter number.

Estimate your chain-link fence cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

6-ft galvanized backyard fence

Add-ons

Estimated cost for 150 linear ft in Georgia (statewide), standard level

$2,600 to $4,200

About $17 to $27.50 per linear ft before permits. Labor is about 56% of the bill.

Cost breakdown
PartLowHigh
Materials$1,200$1,600
Labor$1,350$2,500
Permits and fees$70$110
Total$2,600$4,200
Save and get a PDF report

Cost breakdown for 150 linear ft in Georgia

Part of the jobLowMidpointHighShare
Materials$890$1,400$1,95041%
Labor$490$1,900$3,35056%
Permits and fees$40$90$1403%
Total$1,400$3,400$5,400100%

Basic, standard or premium: Georgia prices

Bands overlap on purpose, since a good standard job can cost as much as a light premium one. Below are the three bands for the default size, then a grid from backyard (100 linear ft) to full lot (300 linear ft).

Basic

$1,400 to $3,000

4-ft galvanized, front yard

Standard

$2,600 to $4,200

6-ft galvanized backyard fence

Premium

$3,800 to $5,400

Vinyl-coated, 8 ft, extra gates

Cost by size and quality level
SizeBasicStandardPremium
backyard (100 linear ft)$960 – $2,050$1,750 – $2,850$2,550 – $3,650
150 ft (150 linear ft)$1,400 – $3,000$2,600 – $4,200$3,800 – $5,400
200 ft (200 linear ft)$1,900 – $4,000$3,450 – $5,550$5,050 – $7,150
full lot (300 linear ft)$2,800 – $5,950$5,150 – $8,300$7,500 – $10,700

Why two Georgia quotes can differ

  • Height

    A 4-ft fence runs $10-$20 per linear foot; 6- to 8-ft backyard fences run $15-$40+ (HomeGuide).

  • Coating

    Black or green vinyl-coated mesh costs more than galvanized.

  • Gates

    Gates are $80-$1,000+ before installation. Rolling or slide gates are the expensive end.

  • Survey

    A land survey ($300-$900) is worth it before you put a fence near a boundary.

Add-ons priced for Georgia

Add-ons start from national price ranges and are scaled by 0.91 for Georgia, which is the average of the area's wage index (0.82) and goods price index (0.99). The estimator above can add them to your total.

Add-on prices
Add-onLocal range
Add one gate (flat)$70 – $910

Other Georgia jobs that often go with chain-link fence

Each project weights the trades differently, so Georgia's wage level does not push every price by the same amount. Compared with the US midpoint, vinyl fence is −5% and gravel driveway −10%.

Related projects with local prices
ProjectSizeRangevs. US
Wood fence150 linear ft$2,750 – $7,050−8%
Vinyl fence150 linear ft$4,350 – $8,650−5%
Aluminum fence150 linear ft$3,550 – $10,700−6%
Gravel driveway1,000 sq ft$2,250 – $9,200−10%

Wages behind the Georgia number

Georgia's labor line is priced from 2 trades, each compared with its US median wage. After weighting by each trade's share of the work, the state comes out at 0.82 times the national level.

For construction laborers (47-2061, weighted 60%) the local median is $18.74 an hour, which is 17% below the national $22.66. The middle half of them earn between $16.93 and $22.57 an hour. BLS counts 27,800 of them working in the state, 56.9 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.

Carpenters (47-2031), 40% of the weighting: a median of $23.72 an hour, 19% below the US median of $29.12. The middle half of them earn between $20.29 and $28.00 an hour. About 9,190 work in the state. That is 18.8 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.

A crew paid at the 75th percentile for construction laborers ($22.57 an hour) would add about $240 to the statewide midpoint; one at the 25th percentile ($16.93) would take off about $110. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.

BLS counts 4,889,170 jobs across Georgia (May 2025), which is 3.1% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Construction laborers (47-2061)60%$16.93$18.74$22.57$22.660.83state
Carpenters (47-2031)40%$20.29$23.72$28.00$29.120.81state
Blended100%0.82

Chain-link fence cost by metro in Georgia

2 of the 10 metros sit above the statewide midpoint of $3,400, and the top-to-bottom gap is 14%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.

MetroRange (150 linear ft)Midpointvs. state
Atlanta, GA$1,450 – $5,650$3,550+4%
Augusta, GA$1,450 – $5,600$3,500+3%
Warner Robins, GA$1,400 – $5,300$3,350−2%
Gainesville, GA$1,400 – $5,250$3,300−3%
Macon, GA$1,350 – $5,200$3,300−4%
Savannah, GA$1,350 – $5,150$3,250−4%
Athens, GA$1,350 – $5,150$3,250−5%
Columbus, GA$1,350 – $5,050$3,200−6%
Dalton, GA$1,350 – $5,000$3,150−7%
Albany, GA$1,350 – $4,900$3,100−9%

Georgia versus the states around it

Georgia ranks 46 of 51 (the 50 states plus DC) for chain-link fence, where 1 is the most expensive. The costliest is Hawaii at $5,300 and the cheapest Arkansas at $3,250, both for 150 linear ft at the midpoint. Georgia sits at $3,400. The five states closest by workforce center are listed below.

States near Georgia, same project and size
StateDistanceRangeMidpointvs. here
Alabama170 miles away$1,400 – $5,200$3,300−4%
South Carolina180 miles away$1,450 – $5,600$3,500+3%
Tennessee210 miles away$1,450 – $5,700$3,550+5%
North Carolina270 miles away$1,450 – $5,650$3,550+4%
Kentucky320 miles away$1,450 – $5,750$3,600+6%

When Georgia weather lets you install

Weather decides when exterior installation can happen, and Georgia is not uniform. The table uses NOAA's 1991-2020 climate normals from the weather station nearest each metro we cover, and counts the months that are neither cold nor hot enough to complicate the job.

Gainesville has the longest comfortable season of the metros we cover in Georgia at 12 months; Albany has the shortest at 9 (September through May). Rainfall runs from 45 inches a year in Augusta to 55 inches in Dalton.

We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.

Climate by metro (NOAA 1991-2020 normals)
MetroJan avg low °FJul avg high °FPrecip (in/yr)Comfortable months
Atlanta34904811: August through June
Augusta4094459: September through May
Savannah4092489: September through May
Columbus3893499: September through May
Gainesville34885212: all year
Athens34924910: September through June
Macon3694479: September through May
Warner Robins36915210: September through June
Dalton32915510: September through June
Albany3993479: September through May

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,600 to $4,200 for Georgia is attached.

Detailed chain-link fence report for Georgia, $9

Multi-page report for Georgia: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Chain-link fence in Georgia: your questions

+How much does it cost to install a chain-link fence in Georgia?

$1,400 to $5,400 for 150 linear ft, using statewide wages and prices. Metro areas inside Georgia can sit above or below that.

+Which city in Georgia is cheapest for chain-link fence?

Albany at about $3,100 (midpoint, 150 linear ft). The priciest is Atlanta at $3,550.

+Is chain-link fence cheaper in Georgia than the US average?

It is 11% cheaper: $3,400 against $3,850 for 150 linear ft at the midpoint.

+What share of the price is labor in Georgia?

About 56% ($1,900). Materials are 41%. Statewide labor for this job is weighted 0.82x the national wage level.

+What do construction laborers earn in Georgia?

The BLS statewide median is $18.74 an hour, against $22.66 for the US. The 25th to 75th percentile range is $16.93 to $22.57.

+Where does Georgia rank for chain-link fence costs?

46th most expensive of 51 (the 50 states plus DC) at the midpoint, $3,400 for 150 linear ft. Rank 1 is the costliest.

+What do basic and premium chain-link fence work cost in Georgia?

For 150 linear ft, basic work runs $1,400 to $3,000 and premium work $3,800 to $5,400. Basic means: 4-ft galvanized, front yard. Premium means: vinyl-coated, 8 ft, extra gates.

+Does the season matter for chain-link fence in Georgia?

Yes where winters or summers are hard. Of the Georgia metros we cover, Gainesville has the most comfortable months (12 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.

+What does "add one gate" add in Georgia?

$70 to $910, from a national range scaled by the statewide wage and goods indexes.

Chain-link fence by city in Georgia

Chain-link fence: all pricesGeorgia cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = Visual Fence Pro's $6-$13 per foot for residential galvanized 4-6 ft fence (taller or vinyl-coated fence costs more).