Bathroom remodel cost in Dalton, GA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (45 sq ft)
- $4,200 – $20,700
- Per sq ft
- $89 – $444
- before permit
- Versus US midpoint
- −11%
- US $14,000
- Rank of 300 metros
- #252
- 1 = most expensive
Local price for a bathroom remodel in the Dalton area: $4,200 to $20,700 for 45 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 11% lower than the US figure. Plumbers, pipefitters and steamfitters earn a median of $22.77 an hour in the Dalton area, 26% below the US median of $30.67.
Estimate your bathroom remodel cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 45 sq ft in Dalton, GA, standard level
$9,150 to $15,800
About $196 to $338 per sq ft before permits. Labor is about 49% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,300 | $7,400 |
| Labor | $4,500 | $7,800 |
| Permits and fees | $340 | $560 |
| Total | $9,150 | $15,800 |
Cost breakdown for 45 sq ft in Dalton, GA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,950 | $5,850 | $9,750 | 47% |
| Labor | $2,050 | $6,150 | $10,200 | 49% |
| Permits and fees | $180 | $450 | $720 | 4% |
| Total | $4,200 | $12,400 | $20,700 | 100% |
What is behind the Dalton number
We price the labor side from BLS wage data for 6 trades: plumbers, pipefitters and steamfitters at 25%, tile and stone setters at 25%, carpenters at 20%, electricians at 10%, drywall and ceiling tile installers at 10%, painters, construction and maintenance at 10%. Weighted together, Dalton wages are 0.83 times the national level. Labor makes up about 49% of the midpoint estimate (53% at national prices).
Materials are scaled with BEA's regional price parity for goods. Dalton is at 96.3 against 100 for the US, so a materials line of $6,100 nationally becomes $5,850 here (midpoint, 45 sq ft). Permits follow the all-items index of 89.8: $180 to $720.
Data note: 45% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Dalton. The wage table below marks each row.
Who does the work: Dalton trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 6 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Dalton the blend is 0.83.
Plumbers, pipefitters and steamfitters (47-2152), 25% of the weighting: a median of $22.77 an hour, 26% below the US median of $30.67. The middle half of them earn between $18.51 and $29.23 an hour. About 90 work in the metro. That is 13.8 per 10,000 jobs, compared with 30.0 nationally, so expect fewer local crews to bid.
Tile and stone setters (47-2044) carry 25% of the labor weighting. BLS does not publish this trade for the Dalton metro, so we used the Georgia statewide median: $23.00 an hour against $26.77 for the US. The middle half of them earn between $20.94 and $27.57 an hour.
Carpenters (47-2031), 20% of the weighting: a median of $20.55 an hour, 29% below the US median of $29.12. The middle half of them earn between $15.16 and $22.17 an hour. About 40 work in the metro. That is 6.1 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For electricians (47-2111, weighted 10%) the local median is $27.34 an hour, which is 10% below the national $30.38. The middle half of them earn between $21.99 and $33.74 an hour. BLS counts 180 of them working in the area, 27.6 for every 10,000 jobs (US: 48.7), so the local bench is thinner than average.
Drywall and ceiling tile installers (47-2081) carry 10% of the labor weighting. BLS does not publish this trade for the Dalton metro, so we used the Georgia statewide median: $28.01 an hour against $28.33 for the US. The middle half of them earn between $24.62 and $29.83 an hour.
Painters, construction and maintenance (47-2141) carry 10% of the labor weighting. BLS does not publish this trade for the Dalton metro, so we used the Georgia statewide median: $23.24 an hour against $23.75 for the US. The middle half of them earn between $20.26 and $27.73 an hour.
A quick sensitivity check: moving the lead trade (plumbers, pipefitters and steamfitters) from the median to the 75th percentile wage adds about $390 to the midpoint estimate; the 25th percentile takes off about $260. That is a swing of roughly 2.1% to 3.1% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Dalton has 65,300 jobs in total (BLS, May 2025), ranking 276th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Plumbers, pipefitters and steamfitters (47-2152) | 25% | $18.51 | $22.77 | $29.23 | $30.67 | 0.74 | metro |
| Tile and stone setters (47-2044) | 25% | $20.94 | $23.00 | $27.57 | $26.77 | 0.86 | state |
| Carpenters (47-2031) | 20% | $15.16 | $20.55 | $22.17 | $29.12 | 0.71 | metro |
| Electricians (47-2111) | 10% | $21.99 | $27.34 | $33.74 | $30.38 | 0.90 | metro |
| Drywall and ceiling tile installers (47-2081) | 10% | $24.62 | $28.01 | $29.83 | $28.33 | 0.99 | state |
| Painters, construction and maintenance (47-2141) | 10% | $20.26 | $23.24 | $27.73 | $23.75 | 0.98 | state |
| Blended | 100% | 0.83 | |||||
Dalton: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Dalton. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from half bath (20 sq ft) to primary bath (100 sq ft).
Basic
$4,200 to $10,800
Cosmetic refresh: vanity, fixtures, paint, flooring
Standard
$9,150 to $15,800
Full remodel with new tub or shower and tile
Premium
$14,100 to $20,700
Primary bath, custom tile, layout change
| Size | Basic | Standard | Premium |
|---|---|---|---|
| half bath (20 sq ft) | $1,950 – $5,000 | $4,250 – $7,300 | $6,550 – $9,600 |
| small full bath (40 sq ft) | $3,750 – $9,650 | $8,150 – $14,100 | $12,600 – $18,500 |
| average bath (60 sq ft) | $5,500 – $14,300 | $12,100 – $20,800 | $18,600 – $27,400 |
| primary bath (100 sq ft) | $9,050 – $23,500 | $19,900 – $34,300 | $30,700 – $45,200 |
Is Dalton cheap or dear? The local comparison
Of the five closest metros, none is cheaper than Dalton. Chattanooga comes closest at about $12,600.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Dalton, GAthis page | $4,200 – $20,700 | $12,400 | |
| Chattanooga, TN35 miles | $4,250 – $21,000 | $12,600 | +1% |
| Gainesville, GA70 miles | $4,250 – $21,100 | $12,700 | +2% |
| Atlanta, GA80 miles | $4,450 – $22,200 | $13,300 | +7% |
| Knoxville, TN95 miles | $4,250 – $21,000 | $12,600 | +2% |
| Huntsville, AL105 miles | $4,250 – $21,100 | $12,700 | +2% |
| Georgia (statewide) | $4,400 – $21,800 | $13,100 | +5% |
| United States | $4,700 – $23,300 | $14,000 | +12% |
Out of the 300 metros we cover, Dalton ranks #252 for the cost of this job (#1 is the most expensive). Statewide, Dalton is 5% below the Georgia figure.
Elsewhere in Georgia
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Atlanta, GA | 2,889,670 jobs | $4,450 – $22,200 | $13,300 | +7% |
| Augusta, GA | 231,930 jobs | $4,350 – $21,600 | $13,000 | +4% |
| Savannah, GA | 198,360 jobs | $4,350 – $21,500 | $12,900 | +4% |
| Columbus, GA | 116,380 jobs | $4,150 – $20,500 | $12,300 | −1% |
| Gainesville, GA | 103,870 jobs | $4,250 – $21,100 | $12,700 | +2% |
| Athens, GA | 95,800 jobs | $4,250 – $21,000 | $12,600 | +1% |
Metros of a similar size
Big cities and small ones price differently, so here is Dalton against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| El Centro, CA | 65,430 jobs | $5,100 – $25,300 | $15,200 | +22% |
| Terre Haute, IN | 65,120 jobs | $4,750 – $23,500 | $14,100 | +13% |
| Harrisonburg, VA | 65,460 jobs | $4,250 – $21,100 | $12,700 | +2% |
| Muskegon, MI | 62,340 jobs | $4,550 – $22,500 | $13,500 | +9% |
What nearby projects cost in Dalton
Jobs that often go together with bathroom remodel are priced below at their usual sizes, using the same Dalton wage and price inputs. Compared with national midpoints, kitchen remodel comes out highest (−7%) and kitchen cabinets lowest (−16%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Shower pan | 1 pan | $770 – $2,450 | −14% |
| Kitchen remodel | 120 sq ft | $17,200 – $29,200 | −7% |
| Kitchen cabinets | 25 linear ft | $3,750 – $11,600 | −16% |
| Window replacement | 10 windows | $4,000 – $13,700 | −9% |
| Kitchen backsplash | 30 sq ft | $270 – $1,350 | −9% |
Specs and site conditions that change a Dalton bid
Size
HomeGuide's average-size bathroom comes to $3,500-$25,000+; per square foot it's $100-$500.
Tile
New tile costs $10-$50 per square foot installed, and regrouting runs $7-$28 per square foot.
Moving plumbing
Keeping the toilet, tub and vanity in place keeps plumbing costs down. Moving them does not.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $9,150 to $15,800 for Dalton, GA is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Dalton, GA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Bathroom remodel in Dalton: your questions
+How much does it cost to remodel a bathroom in Dalton?
For 45 sq ft, expect $4,200 to $20,700 in the Dalton area. A standard-spec job lands at $9,150 to $15,800. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for bathroom remodel in Dalton?
About $89 to $444 per sq ft for materials and labor, plus $180 to $720 for the permit if one is needed. The US range is $100 to $500.
+Is bathroom remodel cheaper in Dalton or Chattanooga?
Chattanooga is 35 miles away. The midpoint for 45 sq ft there is $12,600, which is 1% more than Dalton ($12,400). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Dalton?
About 49% at the midpoint, or $6,150 out of $12,400. Materials are 47% and permits 4%. Nationally, labor is 53%.
+What would average bath (60 sq ft) cost in Dalton?
$5,500 to $27,400. Pick a different size in the estimator above to get your own number.
+Does bathroom remodel need a permit in Dalton?
Often, but rules are set by your city or county building office, so call before you hire. Budget $180 to $720 for fees in the Dalton area (our national range of $200 to $800 scaled by the local price level).
+Is Dalton expensive for bathroom remodel compared with the rest of Georgia?
Dalton is 5% below the Georgia statewide estimate ($13,100 at the midpoint). We cover 10 metros in Georgia; see the state page to compare them.
+What do plumbers, pipefitters and steamfitters earn in Dalton?
The BLS median is $22.77 an hour in the Dalton area, compared with $30.67 nationally. The 25th to 75th percentile range is $18.51 to $29.23.
+What do basic and premium bathroom remodel work cost in Dalton?
For 45 sq ft, basic work runs $4,200 to $10,800 and premium work $14,100 to $20,700. Basic means: cosmetic refresh: vanity, fixtures, paint, flooring. Premium means: primary bath, custom tile, layout change.
Bathroom remodel near Dalton
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Bathroom Remodel Cost? (2026) (accessed November 4, 2026)
- Cost to Renovate: Renovation Labor Report 2026: Where the Money Goes (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
Note on derived figures: Materials = 45% of the installed price, from Cost to Renovate's mid-range split for bathroom projects (50% labor, 45% materials, 5% permits and design). Their sample is their own guides, not a survey of contractors, so treat the split as approximate.