Skip to content
CostLocal

Bathroom remodel cost in Colorado Springs, CO

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (45 sq ft)
$4,500 – $22,300
Per sq ft
$95.50 – $477
before permit
Versus US midpoint
−4%
US $14,000
Rank of 300 metros
#150
1 = most expensive

Local price for a bathroom remodel in the Colorado Springs area: $4,500 to $22,300 for 45 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 4% lower than the US figure. Plumbers, pipefitters and steamfitters earn a median of $29.09 an hour in the Colorado Springs area, 5% below the US median of $30.67.

Estimate your bathroom remodel cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Full remodel with new tub or shower and tile

Estimated cost for 45 sq ft in Colorado Springs, CO, standard level

$9,850 to $16,900

About $210 to $363 per sq ft before permits. Labor is about 53% of the bill.

Cost breakdown
PartLowHigh
Materials$4,300$7,400
Labor$5,150$8,950
Permits and fees$380$620
Total$9,850$16,900
Save and get a PDF report

Cost breakdown for 45 sq ft in Colorado Springs, CO

Part of the jobLowMidpointHighShare
Materials$1,950$5,850$9,75044%
Labor$2,350$7,050$11,80053%
Permits and fees$200$500$8104%
Total$4,500$13,400$22,300100%

Where the Colorado Springs price comes from

Labor is 53% of the midpoint bill here, against 53% nationally. The mix of trades behind this job is plumbers, pipefitters and steamfitters (25%), tile and stone setters (25%), carpenters (20%), electricians (10%), drywall and ceiling tile installers (10%), painters, construction and maintenance (10%). We weight each trade's local median wage by that share and compare it with the national median. In Colorado Springs the blended ratio comes out at 0.95.

Materials are scaled with BEA's regional price parity for goods. Colorado Springs is at 96.1 against 100 for the US, so a materials line of $6,100 nationally becomes $5,850 here (midpoint, 45 sq ft). Permits follow the all-items index of 100.7: $200 to $810.

Who does the work: Colorado Springs trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 6 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Colorado Springs the blend is 0.95.

Plumbers, pipefitters and steamfitters (47-2152), 25% of the weighting: a median of $29.09 an hour, 5% below the US median of $30.67. The middle half of them earn between $24.09 and $37.24 an hour. About 1,060 work in the metro. That is 33.5 per 10,000 jobs, compared with 30.0 nationally, so the supply of crews looks typical.

Tile and stone setters (47-2044), 25% of the weighting: a median of $25.10 an hour, 6% below the US median of $26.77. The middle half of them earn between $19.37 and $34.12 an hour. About 90 work in the metro. That is 2.8 per 10,000 jobs, compared with 2.3 nationally, which suggests plenty of local crews to bid.

Carpenters (47-2031), 20% of the weighting: a median of $27.61 an hour, 5% below the US median of $29.12. The middle half of them earn between $23.86 and $31.36 an hour. About 1,220 work in the metro. That is 38.6 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.

For electricians (47-2111, weighted 10%) the local median is $28.47 an hour, which is 6% below the national $30.38. The middle half of them earn between $22.99 and $35.56 an hour. BLS counts 1,290 of them working in the area, 40.8 for every 10,000 jobs (US: 48.7), so the local bench is thinner than average.

For drywall and ceiling tile installers (47-2081, weighted 10%) the local median is $27.44 an hour, which is 3% below the national $28.33. The middle half of them earn between $22.05 and $29.28 an hour. BLS counts 100 of them working in the area, 3.2 for every 10,000 jobs (US: 5.3), so the local bench is thinner than average.

Painters, construction and maintenance (47-2141), 10% of the weighting: a median of $23.31 an hour, in line with the US median of $23.75. The middle half of them earn between $22.04 and $27.04 an hour. About 360 work in the metro. That is 11.4 per 10,000 jobs, compared with 14.5 nationally, so expect fewer local crews to bid.

A quick sensitivity check: moving the lead trade (plumbers, pipefitters and steamfitters) from the median to the 75th percentile wage adds about $490 to the midpoint estimate; the 25th percentile takes off about $300. That is a swing of roughly 2.3% to 3.7% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Colorado Springs has 316,060 jobs in total (BLS, May 2025), ranking 81st by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Plumbers, pipefitters and steamfitters (47-2152)25%$24.09$29.09$37.24$30.670.95metro
Tile and stone setters (47-2044)25%$19.37$25.10$34.12$26.770.94metro
Carpenters (47-2031)20%$23.86$27.61$31.36$29.120.95metro
Electricians (47-2111)10%$22.99$28.47$35.56$30.380.94metro
Drywall and ceiling tile installers (47-2081)10%$22.05$27.44$29.28$28.330.97metro
Painters, construction and maintenance (47-2141)10%$22.04$23.31$27.04$23.750.98metro
Blended100%0.95

Colorado Springs against nearby metros and the rest of Colorado

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 45 sq ft range from $13,400 to $14,500 across Colorado Springs and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Colorado Springs, COthis page$4,500 – $22,300$13,400
Denver, CO45 miles$4,850 – $24,100$14,500+8%
Pueblo, CO50 miles$4,600 – $22,800$13,700+2%
Boulder, CO95 miles$4,700 – $23,200$14,000+4%
Greeley, CO120 miles$4,600 – $22,700$13,600+2%
Fort Collins, CO135 miles$4,600 – $22,800$13,700+2%
Colorado (statewide)$4,750 – $23,500$14,100+5%
United States$4,700 – $23,300$14,000+5%

Out of the 300 metros we cover, Colorado Springs ranks #150 for the cost of this job (#1 is the most expensive). Statewide, Colorado Springs is 5% below the Colorado figure.

Elsewhere in Colorado

Colorado metros compared with Colorado Springs
MetroSizeRangeMidpointvs. here
Denver, CO1,609,350 jobs$4,850 – $24,100$14,500+8%
Boulder, CO192,390 jobs$4,700 – $23,200$14,000+4%
Fort Collins, CO169,430 jobs$4,600 – $22,800$13,700+2%
Greeley, CO119,540 jobs$4,600 – $22,700$13,600+2%
Grand Junction, CO67,170 jobs$4,600 – $22,700$13,600+2%
Pueblo, CO61,780 jobs$4,600 – $22,800$13,700+2%

Metros of a similar size

Big cities and small ones price differently, so here is Colorado Springs against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Akron, OH319,560 jobs$4,600 – $22,700$13,700+2%
Wichita, KS308,570 jobs$4,300 – $21,400$12,900−4%
Oxnard, CA323,890 jobs$4,950 – $24,600$14,800+10%
Cape Coral, FL304,790 jobs$4,250 – $21,000$12,600−6%

Cost by quality level and size in Colorado Springs

The cited range is split into basic, standard and premium bands, then scaled to Colorado Springs. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from half bath (20 sq ft) to primary bath (100 sq ft).

Basic

$4,500 to $11,600

Cosmetic refresh: vanity, fixtures, paint, flooring

Standard

$9,850 to $16,900

Full remodel with new tub or shower and tile

Premium

$15,200 to $22,300

Primary bath, custom tile, layout change

Cost by size and quality level
SizeBasicStandardPremium
half bath (20 sq ft)$2,100 – $5,400$4,600 – $7,900$7,050 – $10,400
small full bath (40 sq ft)$4,000 – $10,400$8,800 – $15,100$13,500 – $19,900
average bath (60 sq ft)$5,950 – $15,300$13,000 – $22,400$20,000 – $29,400
primary bath (100 sq ft)$9,750 – $25,300$21,400 – $36,900$33,000 – $48,500

Why two Colorado Springs quotes can differ

  • Contractor fee

    A general contractor charges $50-$150 an hour or 10-20% of the project cost.

  • Permit

    A bathroom remodel permit is $200-$800, more if you move walls (HomeGuide).

  • Size

    HomeGuide's average-size bathroom comes to $3,500-$25,000+; per square foot it's $100-$500.

Planning more than one job in Colorado Springs?

Jobs that often go together with bathroom remodel are priced below at their usual sizes, using the same Colorado Springs wage and price inputs. Compared with national midpoints, window replacement comes out highest (−3%) and kitchen backsplash lowest (−5%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Shower pan1 pan$880 – $2,700−4%
Kitchen remodel120 sq ft$17,800 – $30,300−4%
Kitchen cabinets25 linear ft$4,100 – $13,400−4%
Window replacement10 windows$4,400 – $14,600−3%
Kitchen backsplash30 sq ft$280 – $1,450−5%

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $9,850 to $16,900 for Colorado Springs, CO is attached.

Take this estimate with you: PDF report, $9

The report lays out the bathroom remodel numbers for Colorado Springs, CO line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Bathroom remodel in Colorado Springs: your questions

+How much does it cost to remodel a bathroom in Colorado Springs?

For 45 sq ft, expect $4,500 to $22,300 in the Colorado Springs area. A standard-spec job lands at $9,850 to $16,900. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for bathroom remodel in Colorado Springs?

About $95.50 to $477 per sq ft for materials and labor, plus $200 to $810 for the permit if one is needed. The US range is $100 to $500.

+Is bathroom remodel cheaper in Colorado Springs or Denver?

Denver is 45 miles away. The midpoint for 45 sq ft there is $14,500, which is 8% more than Colorado Springs ($13,400). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Colorado Springs?

About 53% at the midpoint, or $7,050 out of $13,400. Materials are 44% and permits 4%. Nationally, labor is 53%.

+What would average bath (60 sq ft) cost in Colorado Springs?

$5,950 to $29,400. Pick a different size in the estimator above to get your own number.

+Does bathroom remodel need a permit in Colorado Springs?

Often, but rules are set by your city or county building office, so call before you hire. Budget $200 to $810 for fees in the Colorado Springs area (our national range of $200 to $800 scaled by the local price level).

+Is Colorado Springs expensive for bathroom remodel compared with the rest of Colorado?

Colorado Springs is 5% below the Colorado statewide estimate ($14,100 at the midpoint). We cover 7 metros in Colorado; see the state page to compare them.

+What do plumbers, pipefitters and steamfitters earn in Colorado Springs?

The BLS median is $29.09 an hour in the Colorado Springs area, compared with $30.67 nationally. The 25th to 75th percentile range is $24.09 to $37.24.

+What do basic and premium bathroom remodel work cost in Colorado Springs?

For 45 sq ft, basic work runs $4,500 to $11,600 and premium work $15,200 to $22,300. Basic means: cosmetic refresh: vanity, fixtures, paint, flooring. Premium means: primary bath, custom tile, layout change.

Bathroom remodel near Colorado Springs

Bathroom remodel: all pricesBathroom remodel in ColoradoAll projects in Colorado SpringsColorado cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = 45% of the installed price, from Cost to Renovate's mid-range split for bathroom projects (50% labor, 45% materials, 5% permits and design). Their sample is their own guides, not a survey of contractors, so treat the split as approximate.