Kitchen backsplash cost in Greenville, NC
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (30 sq ft)
- $260 – $1,350
- Per sq ft
- $8.85 – $45
- before permit
- Versus US midpoint
- −10%
- US $900
- Rank of 300 metros
- #243
- 1 = most expensive
If you want to install a backsplash in Greenville, plan on $260 to $1,350 for 30 sq ft, all in. Per sq ft, that is $8.85 to $45 for materials and labor, with the permit on top. The local midpoint runs 10% lower than the national one. Tile and stone setters earn a median of $21.47 an hour in the Greenville area, 20% below the US median of $26.77.
Estimate your kitchen backsplash cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 30 sq ft in Greenville, NC, standard level
$590 to $1,000
About $19.50 to $34 per sq ft before permits. Labor is about 37% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $360 | $650 |
| Labor | $230 | $370 |
| Permits and fees | $0 | $0 |
| Total | $590 | $1,000 |
Cost breakdown for 30 sq ft in Greenville, NC
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $140 | $510 | $870 | 63% |
| Labor | $120 | $300 | $480 | 37% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $260 | $810 | $1,350 | 100% |
What is behind the Greenville number
We price the labor side from BLS wage data for 2 trades: tile and stone setters at 90%, carpenters at 10%. Weighted together, Greenville wages are 0.80 times the national level. Labor makes up about 37% of the midpoint estimate (42% at national prices). BLS does not publish this trade for the metro, so we used the North Carolina statewide median.
On the materials line, the BEA goods price index for the Greenville metro is 96.6 (US = 100). The midpoint materials bill for 30 sq ft comes to $510, compared with $530 at national prices. Permit and inspection fees are scaled by the broader index (88.4) and land at $0 to $0.
Data note: 90% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Greenville. The wage table below marks each row.
Cost by quality level and size in Greenville
Three bands are cut from the same cited range and localized for Greenville wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$260 to $700
Basic ceramic subway tile
Standard
$590 to $1,000
Mid-grade tile in a pattern
Premium
$920 to $1,350
Slab or natural stone
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small kitchen (25 sq ft) | $220 – $580 | $490 – $850 | $760 – $1,100 |
| average kitchen (30 sq ft) | $260 – $700 | $590 – $1,000 | $920 – $1,350 |
| full-height (50 sq ft) | $440 – $1,150 | $980 – $1,700 | $1,550 – $2,250 |
Kitchen backsplash: what moves the price in Greenville
Part of a remodel
A backsplash often gets bundled into a kitchen remodel and priced with it.
Material
A tile backsplash is $10-$50 per sq ft installed. A stone slab backsplash is $35-$200 and granite slabs are $50-$200.
Labor and minimums
Tile labor is $8-$20 per sq ft and many installers charge minimums for small areas.
Greenville labor market for kitchen backsplash
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Greenville is 0.80 times the national level.
Tile and stone setters (47-2044) carry 90% of the labor weighting. BLS does not publish this trade for the Greenville metro, so we used the North Carolina statewide median: $21.47 an hour against $26.77 for the US. The middle half of them earn between $19.02 and $24.36 an hour.
For carpenters (47-2031, weighted 10%) the local median is $22.47 an hour, which is 23% below the national $29.12. The middle half of them earn between $18.46 and $27.01 an hour. BLS counts 180 of them working in the area, 22.3 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the tile and stone setters on your job are paid at the 75th percentile ($24.36 an hour) instead of the median, the labor line grows by about $35. At the 25th percentile ($19.02) it shrinks by about $30. The total moves by 4.5% or 3.8%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 80,770 jobs in the Greenville area. That makes it the 236th largest of the 300 metros we cover, with 0.05% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Tile and stone setters (47-2044) | 90% | $19.02 | $21.47 | $24.36 | $26.77 | 0.80 | state |
| Carpenters (47-2031) | 10% | $18.46 | $22.47 | $27.01 | $29.12 | 0.77 | metro |
| Blended | 100% | 0.80 | |||||
Related projects, priced for Greenville
Because every project leans on different trades, Greenville's wage level does not move all prices equally. Against the US midpoint, kitchen remodel runs −7% and kitchen cabinets −13%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Kitchen remodel | 120 sq ft | $17,200 – $29,300 | −7% |
| Kitchen cabinets | 25 linear ft | $3,850 – $12,100 | −13% |
| Tile flooring | 200 sq ft | $2,000 – $9,200 | −9% |
| Bathroom remodel | 45 sq ft | $4,150 – $20,600 | −11% |
| Shower pan | 1 pan | $810 – $2,500 | −11% |
How Greenville compares
Of the five closest metros, none is cheaper than Greenville. Fayetteville comes closest at about $810.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Greenville, NCthis page | $260 – $1,350 | $810 | |
| Raleigh, NC60 miles | $270 – $1,350 | $810 | level |
| Fayetteville, NC100 miles | $260 – $1,350 | $810 | level |
| Wilmington, NC100 miles | $270 – $1,350 | $810 | level |
| Durham, NC100 miles | $270 – $1,350 | $810 | level |
| Virginia Beach, VA100 miles | $270 – $1,350 | $810 | +1% |
| North Carolina (statewide) | $270 – $1,350 | $810 | level |
| United States | $300 – $1,500 | $900 | +12% |
Across 300 US metros, Greenville comes in at #243 from the top. The priciest is Honolulu, HI at $1,150; the cheapest is Little Rock, AR at $750 (midpoints, 30 sq ft). Statewide, Greenville is 0% below the North Carolina figure.
Other North Carolina metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Charlotte, NC | 1,358,370 jobs | $270 – $1,350 | $810 | level |
| Raleigh, NC | 743,120 jobs | $270 – $1,350 | $810 | level |
| Greensboro, NC | 365,410 jobs | $280 – $1,400 | $840 | +4% |
| Durham, NC | 344,020 jobs | $270 – $1,350 | $810 | level |
| Winston, NC | 271,980 jobs | $270 – $1,350 | $820 | +1% |
| Wilmington, NC | 191,280 jobs | $270 – $1,350 | $810 | level |
Cities with a workforce like Greenville's
Big cities and small ones price differently, so here is Greenville against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Odessa, TX | 80,910 jobs | $270 – $1,350 | $810 | level |
| Jefferson City, MO | 80,220 jobs | $300 – $1,500 | $900 | +11% |
| Johnson City, TN | 81,690 jobs | $260 – $1,350 | $800 | −1% |
| Las Cruces, NM | 80,000 jobs | $240 – $1,250 | $750 | −7% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $590 to $1,000 for Greenville, NC is attached.
Take this estimate with you: PDF report, $9
The report lays out the kitchen backsplash numbers for Greenville, NC line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Kitchen backsplash in Greenville: your questions
+How much does it cost to install a backsplash in Greenville?
For 30 sq ft, expect $260 to $1,350 in the Greenville area. A standard-spec job lands at $590 to $1,000. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for kitchen backsplash in Greenville?
About $8.85 to $45 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $10 to $50.
+Is kitchen backsplash cheaper in Greenville or Raleigh?
Raleigh is 60 miles away. The midpoint for 30 sq ft there is $810, which is 0% more than Greenville ($810). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Greenville?
About 37% at the midpoint, or $300 out of $810. Materials are 63% and permits 0%. Nationally, labor is 42%.
+What would average kitchen (30 sq ft) cost in Greenville?
$260 to $1,350. Pick a different size in the estimator above to get your own number.
+Does kitchen backsplash need a permit in Greenville?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Greenville area (our national range of $0 to $0 scaled by the local price level).
+Is Greenville expensive for kitchen backsplash compared with the rest of North Carolina?
Greenville is 0% below the North Carolina statewide estimate ($810 at the midpoint). We cover 11 metros in North Carolina; see the state page to compare them.
+What do tile and stone setters earn in Greenville?
BLS has no published metro figure here, so we use the statewide median of $21.47 an hour, compared with $26.77 nationally. The 25th to 75th percentile range is $19.02 to $24.36.
+What do basic and premium kitchen backsplash work cost in Greenville?
For 30 sq ft, basic work runs $260 to $700 and premium work $920 to $1,350. Basic means: basic ceramic subway tile. Premium means: slab or natural stone.
Kitchen backsplash near Greenville
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: 2026 Backsplash Installation Cost (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
Note on derived figures: Materials = installed price minus HomeGuide's $5-$20 per sq ft labor figure, matched low-to-low and high-to-high.