Kitchen backsplash cost in Maryland
Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.
- Statewide range (30 sq ft)
- $280 – $1,450
- Per sq ft
- $9.35 – $47.50
- before permit
- Versus US midpoint
- −5%
- US $900
- Metros covered
- 3
Across Maryland, a kitchen backsplash costs about $280 to $1,450 for 30 sq ft. Statewide, that midpoint is 5% below the US figure of $900. Tile and stone setters earn a median $21.96 an hour in Maryland (US: $26.77).
Inside Maryland, the metros we cover range from $820 (Hagerstown) to $850 (Baltimore) at the midpoint. Pick your closest city in the table for a tighter number.
Estimate your kitchen backsplash cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 30 sq ft in Maryland (statewide), standard level
$620 to $1,100
About $21 to $36 per sq ft before permits. Labor is about 37% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $380 | $690 |
| Labor | $240 | $390 |
| Permits and fees | $0 | $0 |
| Total | $620 | $1,100 |
Cost breakdown for 30 sq ft in Maryland
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $150 | $540 | $920 | 63% |
| Labor | $130 | $320 | $510 | 37% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $280 | $850 | $1,450 | 100% |
If you are planning more than one job in Maryland
Each project weights the trades differently, so Maryland's wage level does not push every price by the same amount. Compared with the US midpoint, kitchen cabinets is +4% and tile flooring −5%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Kitchen remodel | 120 sq ft | $19,000 – $32,300 | +3% |
| Kitchen cabinets | 25 linear ft | $4,400 – $14,600 | +4% |
| Tile flooring | 200 sq ft | $2,100 – $9,700 | −5% |
| Bathroom remodel | 45 sq ft | $4,700 – $23,300 | level |
| Shower pan | 1 pan | $880 – $2,750 | −3% |
Why two Maryland quotes can differ
Material
A tile backsplash is $10-$50 per sq ft installed. A stone slab backsplash is $35-$200 and granite slabs are $50-$200.
Labor and minimums
Tile labor is $8-$20 per sq ft and many installers charge minimums for small areas.
Old backsplash removal
Removing the old one adds $2-$5 per sq ft.
Part of a remodel
A backsplash often gets bundled into a kitchen remodel and priced with it.
Maryland metro-by-metro prices
0 of the 3 metros sit above the statewide midpoint of $850, and the top-to-bottom gap is 4%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.
| Metro | Range (30 sq ft) | Midpoint | vs. state |
|---|---|---|---|
| Baltimore, MD | $280 – $1,450 | $850 | level |
| Lexington Park, MD | $280 – $1,400 | $840 | −2% |
| Hagerstown, MD | $270 – $1,350 | $820 | −4% |
What tile and stone setters and the other trades earn in Maryland
Maryland's labor line is priced from 2 trades, each compared with its US median wage. After weighting by each trade's share of the work, the state comes out at 0.84 times the national level.
Tile and stone setters (47-2044), 90% of the weighting: a median of $21.96 an hour, 18% below the US median of $26.77. The middle half of them earn between $18.57 and $25.00 an hour. About 240 work in the state. That is 0.9 per 10,000 jobs, compared with 2.3 nationally, so expect fewer local crews to bid.
Carpenters (47-2031), 10% of the weighting: a median of $30.27 an hour, 4% above the US median of $29.12. The middle half of them earn between $25.11 and $36.93 an hour. About 9,770 work in the state. That is 35.4 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
A crew paid at the 75th percentile for tile and stone setters ($25.00 an hour) would add about $40 to the statewide midpoint; one at the 25th percentile ($18.57) would take off about $45. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.
BLS counts 2,763,030 jobs across Maryland (May 2025), which is 1.8% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Tile and stone setters (47-2044) | 90% | $18.57 | $21.96 | $25.00 | $26.77 | 0.82 | state |
| Carpenters (47-2031) | 10% | $25.11 | $30.27 | $36.93 | $29.12 | 1.04 | state |
| Blended | 100% | 0.84 | |||||
Maryland versus the states around it
Maryland ranks 28 of 51 (the 50 states plus DC) for kitchen backsplash, where 1 is the most expensive. The costliest is Hawaii at $1,100 and the cheapest Arkansas at $760, both for 30 sq ft at the midpoint. Maryland sits at $850. The five states closest by workforce center are listed below.
| State | Distance | Range | Midpoint | vs. here |
|---|---|---|---|---|
| District of Columbia | 50 miles away | $310 – $1,550 | $930 | +9% |
| Delaware | 60 miles away | $290 – $1,450 | $880 | +3% |
| Pennsylvania | 70 miles away | $330 – $1,650 | $980 | +15% |
| New Jersey | 110 miles away | $330 – $1,650 | $980 | +15% |
| Virginia | 150 miles away | $280 – $1,450 | $860 | level |
Basic, standard or premium: Maryland prices
Bands overlap on purpose, since a good standard job can cost as much as a light premium one. Below are the three bands for the default size, then a grid from small kitchen (25 sq ft) to full-height (50 sq ft).
Basic
$280 to $740
Basic ceramic subway tile
Standard
$620 to $1,100
Mid-grade tile in a pattern
Premium
$970 to $1,450
Slab or natural stone
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small kitchen (25 sq ft) | $230 – $620 | $520 – $900 | $810 – $1,200 |
| average kitchen (30 sq ft) | $280 – $740 | $620 – $1,100 | $970 – $1,450 |
| full-height (50 sq ft) | $470 – $1,250 | $1,050 – $1,800 | $1,600 – $2,400 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $620 to $1,100 for Maryland is attached.
Detailed kitchen backsplash report for Maryland, $9
Multi-page report for Maryland: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Kitchen backsplash in Maryland: your questions
+How much does it cost to install a backsplash in Maryland?
$280 to $1,450 for 30 sq ft, using statewide wages and prices. Metro areas inside Maryland can sit above or below that.
+Which city in Maryland is cheapest for kitchen backsplash?
Hagerstown at about $820 (midpoint, 30 sq ft). The priciest is Baltimore at $850.
+Is kitchen backsplash cheaper in Maryland than the US average?
It is 5% cheaper: $850 against $900 for 30 sq ft at the midpoint.
+What share of the price is labor in Maryland?
About 37% ($320). Materials are 63%. Statewide labor for this job is weighted 0.84x the national wage level.
+What do tile and stone setters earn in Maryland?
The BLS statewide median is $21.96 an hour, against $26.77 for the US. The 25th to 75th percentile range is $18.57 to $25.00.
+Where does Maryland rank for kitchen backsplash costs?
28th most expensive of 51 (the 50 states plus DC) at the midpoint, $850 for 30 sq ft. Rank 1 is the costliest.
+What do basic and premium kitchen backsplash work cost in Maryland?
For 30 sq ft, basic work runs $280 to $740 and premium work $970 to $1,450. Basic means: basic ceramic subway tile. Premium means: slab or natural stone.
Kitchen backsplash by city in Maryland
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: 2026 Backsplash Installation Cost (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
Note on derived figures: Materials = installed price minus HomeGuide's $5-$20 per sq ft labor figure, matched low-to-low and high-to-high.