Asphalt driveway cost in Lynchburg, VA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (600 sq ft)
- $2,850 – $6,800
- Per sq ft
- $4.65 – $11
- before permit
- Versus US midpoint
- −8%
- US $5,250
- Rank of 300 metros
- #234
- 1 = most expensive
If you want to pave a driveway in Lynchburg, plan on $2,850 to $6,800 for 600 sq ft, all in. Per sq ft, that is $4.65 to $11 for materials and labor, with the permit on top. The local midpoint runs 8% lower than the national one. Paving, surfacing and tamping equipment operators earn a median of $23.10 an hour in the Lynchburg area, 10% below the US median of $25.64.
Estimate your asphalt driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in Lynchburg, VA, standard level
$4,000 to $5,600
About $6.55 to $9.10 per sq ft before permits. Labor is about 38% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,500 | $3,250 |
| Labor | $1,450 | $2,200 |
| Permits and fees | $85 | $140 |
| Total | $4,000 | $5,600 |
Cost breakdown for 600 sq ft in Lynchburg, VA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,900 | $2,850 | $3,850 | 60% |
| Labor | $870 | $1,800 | $2,750 | 38% |
| Permits and fees | $45 | $110 | $180 | 2% |
| Total | $2,850 | $4,800 | $6,800 | 100% |
What is behind the Lynchburg number
We price the labor side from BLS wage data for 3 trades: paving, surfacing and tamping equipment operators at 40%, construction laborers at 30%, operating engineers and other construction equipment operators at 30%. Weighted together, Lynchburg wages are 0.86 times the national level. Labor makes up about 38% of the midpoint estimate (41% at national prices). BLS does not publish this trade for the metro, so we used the Virginia statewide median.
On the materials line, the BEA goods price index for the Lynchburg metro is 96.8 (US = 100). The midpoint materials bill for 600 sq ft comes to $2,850, compared with $2,950 at national prices. Permit and inspection fees are scaled by the broader index (89.4) and land at $45 to $180.
Data note: 40% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Lynchburg. The wage table below marks each row.
Planning more than one job in Lynchburg?
Because every project leans on different trades, Lynchburg's wage level does not move all prices equally. Against the US midpoint, French drain runs −10% and concrete driveway −20%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete driveway | 600 sq ft | $3,000 – $7,300 | −20% |
| Gravel driveway | 1,000 sq ft | $2,250 – $9,150 | −10% |
| Paver patio | 300 sq ft | $2,650 – $4,850 | −11% |
| French drain | 60 linear ft | $540 – $1,900 | −10% |
| Concrete slab | 400 sq ft | $2,100 – $4,550 | −14% |
| Concrete patio | 300 sq ft | $1,100 – $3,300 | −16% |
How Lynchburg compares
Same job, same size (600 sq ft), priced for the nearest metros. Charlottesville is the priciest of the group at $5,000. Roanoke is the cheapest at $4,800.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Lynchburg, VAthis page | $2,850 – $6,800 | $4,800 | |
| Roanoke, VA40 miles | $2,850 – $6,750 | $4,800 | level |
| Charlottesville, VA55 miles | $2,950 – $7,100 | $5,000 | +4% |
| Blacksburg, VA75 miles | $2,850 – $6,850 | $4,850 | +1% |
| Harrisonburg, VA80 miles | $2,850 – $6,900 | $4,900 | +1% |
| Burlington, NC90 miles | $2,850 – $6,900 | $4,850 | +1% |
| Virginia (statewide) | $3,000 – $7,150 | $5,100 | +6% |
| United States | $3,050 – $7,400 | $5,250 | +9% |
Across 300 US metros, Lynchburg comes in at #234 from the top. The priciest is Kahului, HI at $7,650; the cheapest is Fort Smith, AR at $4,450 (midpoints, 600 sq ft). Statewide, Lynchburg is 5% below the Virginia figure.
Other Virginia metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Virginia Beach, VA | 763,060 jobs | $2,850 – $6,800 | $4,800 | level |
| Richmond, VA | 660,350 jobs | $2,900 – $7,000 | $4,950 | +3% |
| Roanoke, VA | 153,980 jobs | $2,850 – $6,750 | $4,800 | level |
| Charlottesville, VA | 114,780 jobs | $2,950 – $7,100 | $5,000 | +4% |
| Blacksburg, VA | 74,070 jobs | $2,850 – $6,850 | $4,850 | +1% |
| Winchester, VA | 67,740 jobs | $2,850 – $6,850 | $4,850 | +1% |
Cities with a workforce like Lynchburg's
Big cities and small ones price differently, so here is Lynchburg against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Slidell, LA | 98,240 jobs | $2,800 – $6,700 | $4,750 | −2% |
| Binghamton, NY | 97,030 jobs | $3,050 – $7,450 | $5,250 | +9% |
| Santa Cruz, CA | 98,500 jobs | $3,550 – $8,850 | $6,200 | +29% |
| Yakima, WA | 97,010 jobs | $3,300 – $8,050 | $5,700 | +18% |
Specs and site conditions that change a Lynchburg bid
Small jobs cost more per foot
Paving crews move a paver, roller and trucks to your address, so a 400 sq ft driveway carries more mobilization per square foot than a 1,000 sq ft one.
Hot-mix price
Hot-mix asphalt is $100-$200 per ton delivered and moves with oil prices (PaveGauge).
Sealcoating
Sealing is $1-$2 per sq ft and is a maintenance cost, not part of the install.
Pick a size, pick a tier: asphalt driveway pricing in Lynchburg
Three bands are cut from the same cited range and localized for Lynchburg wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$2,850 to $4,400
New topcoat over a sound base, flat lot
Standard
$4,000 to $5,600
Full new driveway: base, 2-3 in of hot mix, edging
Premium
$5,200 to $6,800
Full tear-out and rebuild, drainage work, heavy-duty depth
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,150 – $1,800 | $1,650 – $2,300 | $2,150 – $2,800 |
| 20x20 (400 sq ft) | $1,900 – $3,000 | $2,700 – $3,800 | $3,500 – $4,600 |
| 2-car (20x30), 600 sq ft | $2,850 – $4,400 | $4,000 – $5,600 | $5,200 – $6,800 |
| long rural (10x100), 1,000 sq ft | $4,700 – $7,300 | $6,650 – $9,250 | $8,600 – $11,200 |
Climate in Lynchburg: timing your asphalt driveway job
We use NOAA's 1991-2020 climate normals for Lynchburg #2 (5 miles from the city center). These are 30-year monthly averages, not forecasts.
March through November is the stretch where digging, grading and setting material in the ground runs into the fewest weather problems in Lynchburg (9 of 12 months). January, February and December have an average overnight low at or below freezing (32°F).
In January, February and December the average low is at or below freezing, which means frozen ground and slower digging, compaction and sod or stone placement. NOAA counts about 119 days a year with a low at or below 32°F at this station.
Lynchburg gets about 44 inches of precipitation in a normal year, including roughly 12 inches of snow. The wettest months are May, June and July (4.2 inches in May). Inside the workable window, October and November are the driest, at 3.4 and 3.2 inches. The station averages about 20 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 46 | 25 | 3.4 | Cold |
| Feb | 50 | 26 | 2.9 | Cold |
| Mar | 58 | 33 | 3.7 | Workable |
| Apr | 68 | 41 | 3.6 | Workable |
| May | 75 | 51 | 4.2 | Workable |
| Jun | 82 | 60 | 4.0 | Workable |
| Jul | 85 | 65 | 4.1 | Workable |
| Aug | 84 | 63 | 3.6 | Workable |
| Sep | 78 | 56 | 3.9 | Workable |
| Oct | 69 | 44 | 3.4 | Workable |
| Nov | 59 | 33 | 3.2 | Workable |
| Dec | 49 | 28 | 3.8 | Cold |
Extras that change the Lynchburg total
Extras are quoted nationally and then scaled to Lynchburg by the average of the local wage index (0.86) and goods index (0.97), a factor of 0.91. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add a sealcoat | $550 – $1,100 |
Lynchburg labor market for asphalt driveway
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Lynchburg is 0.86 times the national level.
Paving, surfacing and tamping equipment operators (47-2071) carry 40% of the labor weighting. BLS does not publish this trade for the Lynchburg metro, so we used the Virginia statewide median: $23.10 an hour against $25.64 for the US. The middle half of them earn between $20.96 and $27.70 an hour.
Construction laborers (47-2061), 30% of the weighting: a median of $18.46 an hour, 19% below the US median of $22.66. The middle half of them earn between $17.48 and $21.81 an hour. About 600 work in the metro. That is 61.7 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
For operating engineers and other construction equipment operators (47-2073, weighted 30%) the local median is $24.09 an hour, which is 16% below the national $28.78. The middle half of them earn between $21.90 and $28.17 an hour. BLS counts 230 of them working in the area, 23.7 for every 10,000 jobs (US: 30.7), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the paving, surfacing and tamping equipment operators on your job are paid at the 75th percentile ($27.70 an hour) instead of the median, the labor line grows by about $150. At the 25th percentile ($20.96) it shrinks by about $70. The total moves by 3.2% or 1.5%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 97,190 jobs in the Lynchburg area. That makes it the 206th largest of the 300 metros we cover, with 0.06% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Paving, surfacing and tamping equipment operators (47-2071) | 40% | $20.96 | $23.10 | $27.70 | $25.64 | 0.90 | state |
| Construction laborers (47-2061) | 30% | $17.48 | $18.46 | $21.81 | $22.66 | 0.81 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $21.90 | $24.09 | $28.17 | $28.78 | 0.84 | metro |
| Blended | 100% | 0.86 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,000 to $5,600 for Lynchburg, VA is attached.
Detailed asphalt driveway report for Lynchburg, VA, $9
Multi-page report for Lynchburg, VA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Asphalt driveway in Lynchburg: your questions
+How much does it cost to pave a driveway in Lynchburg?
For 600 sq ft, expect $2,850 to $6,800 in the Lynchburg area. A standard-spec job lands at $4,000 to $5,600. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for asphalt driveway in Lynchburg?
About $4.65 to $11 per sq ft for materials and labor, plus $45 to $180 for the permit if one is needed. The US range is $5 to $12.
+Is asphalt driveway cheaper in Lynchburg or Roanoke?
Roanoke is 40 miles away. The midpoint for 600 sq ft there is $4,800, which is 0% less than Lynchburg ($4,800). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Lynchburg?
About 38% at the midpoint, or $1,800 out of $4,800. Materials are 60% and permits 2%. Nationally, labor is 41%.
+What would 2-car (20x30), 600 sq ft cost in Lynchburg?
$2,850 to $6,800. Pick a different size in the estimator above to get your own number.
+Does asphalt driveway need a permit in Lynchburg?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $180 for fees in the Lynchburg area (our national range of $50 to $200 scaled by the local price level).
+Is Lynchburg expensive for asphalt driveway compared with the rest of Virginia?
Lynchburg is 5% below the Virginia statewide estimate ($5,100 at the midpoint). We cover 8 metros in Virginia; see the state page to compare them.
+What do paving, surfacing and tamping equipment operators earn in Lynchburg?
BLS has no published metro figure here, so we use the statewide median of $23.10 an hour, compared with $25.64 nationally. The 25th to 75th percentile range is $20.96 to $27.70.
+What do basic and premium asphalt driveway work cost in Lynchburg?
For 600 sq ft, basic work runs $2,850 to $4,400 and premium work $5,200 to $6,800. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.
+When is the best time to pave a driveway in Lynchburg?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. October and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add a sealcoat" add in Lynchburg?
$550 to $1,100 for 600 sq ft, from a national range scaled by the local wage and goods indexes.
Asphalt driveway near Lynchburg
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Paving an Asphalt Driveway Cost? (2026) (accessed November 4, 2026)
- PaveGauge: Asphalt Driveway Cost (2026): Price by Size (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.