Asphalt driveway cost in Davenport, IA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (600 sq ft)
- $3,050 – $7,550
- Per sq ft
- $5.05 – $12.50
- before permit
- Versus US midpoint
- +2%
- US $5,250
- Rank of 300 metros
- #113
- 1 = most expensive
If you want to pave a driveway in Davenport, plan on $3,050 to $7,550 for 600 sq ft, all in. Per sq ft, that is $5.05 to $12.50 for materials and labor, with the permit on top. The local midpoint lands close to the national one. Paving, surfacing and tamping equipment operators earn a median of $29.38 an hour in the Davenport area, 15% above the US median of $25.64.
Estimate your asphalt driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in Davenport, IA, standard level
$4,400 to $6,200
About $7.20 to $10 per sq ft before permits. Labor is about 45% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,400 | $3,150 |
| Labor | $1,900 | $2,900 |
| Permits and fees | $85 | $140 |
| Total | $4,400 | $6,200 |
Cost breakdown for 600 sq ft in Davenport, IA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,850 | $2,800 | $3,750 | 53% |
| Labor | $1,150 | $2,400 | $3,650 | 45% |
| Permits and fees | $45 | $110 | $180 | 2% |
| Total | $3,050 | $5,300 | $7,550 | 100% |
What is behind the Davenport number
Labor is 45% of the midpoint bill here, against 41% nationally. The mix of trades behind this job is paving, surfacing and tamping equipment operators (40%), construction laborers (30%), operating engineers and other construction equipment operators (30%). We weight each trade's local median wage by that share and compare it with the national median. In Davenport the blended ratio comes out at 1.13. BLS does not publish this trade for the metro, so we used the Iowa statewide median.
On the materials line, the BEA goods price index for the Davenport metro is 94.2 (US = 100). The midpoint materials bill for 600 sq ft comes to $2,800, compared with $2,950 at national prices. Permit and inspection fees are scaled by the broader index (89.1) and land at $45 to $180.
Data note: 40% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Davenport. The wage table below marks each row.
Climate in Davenport: timing your asphalt driveway job
We use NOAA's 1991-2020 climate normals for Davenport (5 miles from the city center). These are 30-year monthly averages, not forecasts.
April through October is the stretch where digging, grading and setting material in the ground runs into the fewest weather problems in Davenport (7 of 12 months). January, February, March, November and December have an average overnight low at or below freezing (32°F).
In January, February, March, November and December the average low is at or below freezing, which means frozen ground and slower digging, compaction and sod or stone placement. NOAA counts about 136 days a year with a low at or below 32°F at this station.
Davenport gets about 36 inches of precipitation in a normal year. The wettest months are May, June and July (4.8 inches in May). Inside the workable window, September and October are the driest, at 3.5 and 2.7 inches. The station averages about 13 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 30 | 14 | 1.1 | Cold |
| Feb | 34 | 18 | 1.4 | Cold |
| Mar | 48 | 29 | 2.3 | Cold |
| Apr | 61 | 39 | 3.6 | Workable |
| May | 73 | 51 | 4.8 | Workable |
| Jun | 81 | 61 | 4.7 | Workable |
| Jul | 84 | 64 | 4.1 | Workable |
| Aug | 82 | 62 | 4.0 | Workable |
| Sep | 76 | 53 | 3.5 | Workable |
| Oct | 63 | 42 | 2.7 | Workable |
| Nov | 48 | 30 | 2.3 | Cold |
| Dec | 35 | 20 | 1.6 | Cold |
Pick a size, pick a tier: asphalt driveway pricing in Davenport
Three bands are cut from the same cited range and localized for Davenport wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$3,050 to $4,850
New topcoat over a sound base, flat lot
Standard
$4,400 to $6,200
Full new driveway: base, 2-3 in of hot mix, edging
Premium
$5,750 to $7,550
Full tear-out and rebuild, drainage work, heavy-duty depth
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,250 – $2,000 | $1,800 – $2,550 | $2,400 – $3,150 |
| 20x20 (400 sq ft) | $2,050 – $3,300 | $2,950 – $4,200 | $3,900 – $5,100 |
| 2-car (20x30), 600 sq ft | $3,050 – $4,850 | $4,400 – $6,200 | $5,750 – $7,550 |
| long rural (10x100), 1,000 sq ft | $5,050 – $8,050 | $7,300 – $10,300 | $9,550 – $12,500 |
Specs and site conditions that change a Davenport bid
Sealcoating
Sealing is $1-$2 per sq ft and is a maintenance cost, not part of the install.
New versus overlay
Resurfacing an existing driveway runs $3-$7 per sq ft; a full new driveway runs $5-$12+ (HomeGuide). Tearing out and replacing one is higher still.
Base work
Four to eight inches of compacted aggregate under the asphalt is where cheap quotes cut corners. Base typically runs $1-$3 per sq ft.
Davenport labor market for asphalt driveway
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Davenport is 1.13 times the national level.
Paving, surfacing and tamping equipment operators (47-2071) carry 40% of the labor weighting. BLS does not publish this trade for the Davenport metro, so we used the Iowa statewide median: $29.38 an hour against $25.64 for the US. The middle half of them earn between $27.45 and $29.39 an hour.
Construction laborers (47-2061), 30% of the weighting: a median of $26.14 an hour, 15% above the US median of $22.66. The middle half of them earn between $21.74 and $33.98 an hour. About 1,320 work in the metro. That is 73.2 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
For operating engineers and other construction equipment operators (47-2073, weighted 30%) the local median is $31.18 an hour, which is 8% above the national $28.78. The middle half of them earn between $25.71 and $40.96 an hour. BLS counts 570 of them working in the area, 31.6 for every 10,000 jobs (US: 30.7), so the local bench is about average.
Quotes come from real crews, not medians. If the paving, surfacing and tamping equipment operators on your job are paid at the 75th percentile ($29.39 an hour) instead of the median, the labor line grows by about $0. At the 25th percentile ($27.45) it shrinks by about $65. The total moves by 0.0% or 1.2%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 180,450 jobs in the Davenport-Moline-Rock Island area. That makes it the 128th largest of the 300 metros we cover, with 0.12% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Paving, surfacing and tamping equipment operators (47-2071) | 40% | $27.45 | $29.38 | $29.39 | $25.64 | 1.15 | state |
| Construction laborers (47-2061) | 30% | $21.74 | $26.14 | $33.98 | $22.66 | 1.15 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $25.71 | $31.18 | $40.96 | $28.78 | 1.08 | metro |
| Blended | 100% | 1.13 | |||||
Davenport against nearby metros and the rest of Iowa
Of the five closest metros, 3 are cheaper than Davenport. Iowa City is the lowest at about $5,150 (midpoint, 600 sq ft), 60 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Davenport, IAthis page | $3,050 – $7,550 | $5,300 | |
| Iowa City, IA60 miles | $3,000 – $7,350 | $5,150 | −3% |
| Peoria, IL65 miles | $3,300 – $8,350 | $5,850 | +10% |
| Dubuque, IA75 miles | $3,000 – $7,400 | $5,200 | −2% |
| Cedar Rapids, IA75 miles | $3,000 – $7,400 | $5,200 | −2% |
| Rockford, IL100 miles | $3,350 – $8,450 | $5,900 | +11% |
| Iowa (statewide) | $3,000 – $7,350 | $5,150 | −3% |
| United States | $3,050 – $7,400 | $5,250 | −2% |
Across 300 US metros, Davenport comes in at #113 from the top. The priciest is Kahului, HI at $7,650; the cheapest is Fort Smith, AR at $4,450 (midpoints, 600 sq ft). Statewide, Davenport is 3% above the Iowa figure.
Other Iowa metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Des Moines, IA | 404,130 jobs | $3,000 – $7,450 | $5,200 | −2% |
| Cedar Rapids, IA | 139,260 jobs | $3,000 – $7,400 | $5,200 | −2% |
| Iowa City, IA | 93,760 jobs | $3,000 – $7,350 | $5,150 | −3% |
| Waterloo, IA | 84,260 jobs | $3,200 – $8,000 | $5,600 | +5% |
| Sioux City, IA | 75,010 jobs | $3,000 – $7,350 | $5,150 | −3% |
| Dubuque, IA | 58,470 jobs | $3,000 – $7,400 | $5,200 | −2% |
Cities with a workforce like Davenport's
Big cities and small ones price differently, so here is Davenport against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Asheville, NC | 180,620 jobs | $2,900 – $7,000 | $4,950 | −7% |
| Lafayette, LA | 179,570 jobs | $2,750 – $6,650 | $4,700 | −11% |
| Lincoln, NE | 182,620 jobs | $2,950 – $7,150 | $5,050 | −5% |
| Sioux Falls, SD | 178,590 jobs | $3,000 – $7,350 | $5,150 | −3% |
Extras that change the Davenport total
Extras are quoted nationally and then scaled to Davenport by the average of the local wage index (1.13) and goods index (0.94), a factor of 1.04. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add a sealcoat | $620 – $1,250 |
Planning more than one job in Davenport?
Because every project leans on different trades, Davenport's wage level does not move all prices equally. Against the US midpoint, concrete driveway runs +4% and concrete slab level.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete driveway | 600 sq ft | $3,750 – $9,600 | +4% |
| Gravel driveway | 1,000 sq ft | $2,600 – $10,500 | +3% |
| Paver patio | 300 sq ft | $3,100 – $5,650 | +4% |
| French drain | 60 linear ft | $620 – $2,150 | +4% |
| Concrete slab | 400 sq ft | $2,500 – $5,150 | level |
| Concrete patio | 300 sq ft | $1,250 – $4,050 | +1% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,400 to $6,200 for Davenport, IA is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Davenport, IA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Asphalt driveway in Davenport: your questions
+How much does it cost to pave a driveway in Davenport?
For 600 sq ft, expect $3,050 to $7,550 in the Davenport area. A standard-spec job lands at $4,400 to $6,200. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for asphalt driveway in Davenport?
About $5.05 to $12.50 per sq ft for materials and labor, plus $45 to $180 for the permit if one is needed. The US range is $5 to $12.
+Is asphalt driveway cheaper in Davenport or Iowa City?
Iowa City is 60 miles away. The midpoint for 600 sq ft there is $5,150, which is 3% less than Davenport ($5,300). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Davenport?
About 45% at the midpoint, or $2,400 out of $5,300. Materials are 53% and permits 2%. Nationally, labor is 41%.
+What would 2-car (20x30), 600 sq ft cost in Davenport?
$3,050 to $7,550. Pick a different size in the estimator above to get your own number.
+Does asphalt driveway need a permit in Davenport?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $180 for fees in the Davenport area (our national range of $50 to $200 scaled by the local price level).
+Is Davenport expensive for asphalt driveway compared with the rest of Iowa?
Davenport is 3% above the Iowa statewide estimate ($5,150 at the midpoint). We cover 7 metros in Iowa; see the state page to compare them.
+What do paving, surfacing and tamping equipment operators earn in Davenport?
BLS has no published metro figure here, so we use the statewide median of $29.38 an hour, compared with $25.64 nationally. The 25th to 75th percentile range is $27.45 to $29.39.
+What do basic and premium asphalt driveway work cost in Davenport?
For 600 sq ft, basic work runs $3,050 to $4,850 and premium work $5,750 to $7,550. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.
+When is the best time to pave a driveway in Davenport?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through October. September and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add a sealcoat" add in Davenport?
$620 to $1,250 for 600 sq ft, from a national range scaled by the local wage and goods indexes.
Asphalt driveway near Davenport
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Paving an Asphalt Driveway Cost? (2026) (accessed November 4, 2026)
- PaveGauge: Asphalt Driveway Cost (2026): Price by Size (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.