Aluminum fence cost in Charleston, SC
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $3,550 – $10,700
- Per linear ft
- $23.50 – $70.50
- before permit
- Versus US midpoint
- −6%
- US $7,600
- Rank of 300 metros
- #184
- 1 = most expensive
Local price for an aluminum fence in the Charleston area: $3,550 to $10,700 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 6% lower than the US figure. Carpenters earn a median of $24.22 an hour in the Charleston area, 17% below the US median of $29.12.
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Charleston, SC, standard level
$5,700 to $8,600
About $37.50 to $56.50 per linear ft before permits. Labor is about 33% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,700 | $5,700 |
| Labor | $1,950 | $2,750 |
| Permits and fees | $75 | $120 |
| Total | $5,700 | $8,600 |
Cost breakdown for 150 linear ft in Charleston, SC
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,150 | $4,700 | $7,250 | 66% |
| Labor | $1,350 | $2,350 | $3,350 | 33% |
| Permits and fees | $40 | $95 | $150 | 1% |
| Total | $3,550 | $7,150 | $10,700 | 100% |
What is behind the Charleston number
Labor is 33% of the midpoint bill here, against 35% nationally. The mix of trades behind this job is carpenters (40%), construction laborers (40%), sheet metal workers (20%). We weight each trade's local median wage by that share and compare it with the national median. In Charleston the blended ratio comes out at 0.90.
Materials are scaled with BEA's regional price parity for goods. Charleston is at 96.3 against 100 for the US, so a materials line of $4,900 nationally becomes $4,700 here (midpoint, 150 linear ft). Permits follow the all-items index of 101.0: $40 to $150.
Add-ons priced for Charleston
Add-ons start from national price ranges and are scaled by 0.93 for Charleston, which is the average of the area's wage index (0.90) and goods price index (0.96). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $190 – $840 |
Is Charleston cheap or dear? The local comparison
Of the five closest metros, all are cheaper than Charleston. Savannah is the lowest at about $6,850 (midpoint, 150 linear ft), 95 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Charleston, SCthis page | $3,550 – $10,700 | $7,150 | |
| Hilton Head, SC65 miles | $3,500 – $10,600 | $7,100 | −1% |
| Florence, SC80 miles | $3,500 – $10,600 | $7,050 | −1% |
| Myrtle Beach, SC85 miles | $3,400 – $10,300 | $6,850 | −4% |
| Columbia, SC95 miles | $3,450 – $10,500 | $7,000 | −2% |
| Savannah, GA95 miles | $3,350 – $10,300 | $6,850 | −4% |
| South Carolina (statewide) | $3,500 – $10,600 | $7,050 | −1% |
| United States | $3,800 – $11,400 | $7,600 | +6% |
Out of the 300 metros we cover, Charleston ranks #184 for the cost of this job (#1 is the most expensive). Statewide, Charleston is 1% above the South Carolina figure.
Elsewhere in South Carolina
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Greenville, SC | 434,900 jobs | $3,500 – $10,600 | $7,050 | −2% |
| Columbia, SC | 394,200 jobs | $3,450 – $10,500 | $7,000 | −2% |
| Spartanburg, SC | 165,150 jobs | $3,550 – $10,700 | $7,100 | level |
| Myrtle Beach, SC | 146,260 jobs | $3,400 – $10,300 | $6,850 | −4% |
| Florence, SC | 89,060 jobs | $3,500 – $10,600 | $7,050 | −1% |
| Hilton Head, SC | 81,920 jobs | $3,500 – $10,600 | $7,100 | −1% |
Metros of a similar size
Big cities and small ones price differently, so here is Charleston against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Columbia, SC | 394,200 jobs | $3,450 – $10,500 | $7,000 | −2% |
| Boise, ID | 391,790 jobs | $3,600 – $10,800 | $7,200 | +1% |
| Des Moines, IA | 404,130 jobs | $3,700 – $11,100 | $7,400 | +3% |
| Tucson, AZ | 389,630 jobs | $3,500 – $10,600 | $7,050 | −1% |
The best months for aluminum fence in Charleston
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Charleston City (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
Weather is not a serious constraint for exterior installation in Charleston: no month in the averages is cold enough (an average daytime high under 45°F) or hot enough (an average daytime high of 90°F or more) to rule it out, so the workable window is all year.
Charleston gets about 44 inches of precipitation in a normal year. The wettest months are July, August and September (6.1 inches in August). The station averages about 25 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 58 | 44 | 2.6 | Workable |
| Feb | 60 | 46 | 2.6 | Workable |
| Mar | 66 | 52 | 3.0 | Workable |
| Apr | 72 | 60 | 3.0 | Workable |
| May | 79 | 68 | 2.6 | Workable |
| Jun | 84 | 74 | 4.8 | Workable |
| Jul | 88 | 77 | 5.1 | Workable |
| Aug | 86 | 77 | 6.1 | Workable |
| Sep | 83 | 73 | 5.3 | Workable |
| Oct | 76 | 63 | 4.1 | Workable |
| Nov | 67 | 53 | 2.3 | Workable |
| Dec | 61 | 47 | 2.9 | Workable |
What nearby projects cost in Charleston
Jobs that often go together with aluminum fence are priced below at their usual sizes, using the same Charleston wage and price inputs. Compared with national midpoints, vinyl fence comes out highest (−5%) and inground pool lowest (−8%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,300 – $8,650 | −5% |
| Wood fence | 150 linear ft | $2,800 – $7,100 | −8% |
| Chain-link fence | 150 linear ft | $1,450 – $5,650 | −8% |
| Inground pool | 450 sq ft | $33,000 – $103,500 | −8% |
Aluminum fence: what moves the price in Charleston
Soil and slope
Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.
Pool codes
Many codes require a pool barrier with gaps under 4 inches, which influences the style you can buy.
Permit
A fence permit runs $40-$150.
Charleston: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Charleston. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from pool fence (100 linear ft) to 200 ft (200 linear ft).
Basic
$3,550 to $6,450
Standard picket or ornamental, 4 ft
Standard
$5,700 to $8,600
Ornamental pool-code fence, 4-5 ft
Premium
$7,850 to $10,700
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,400 – $4,300 | $3,850 – $5,750 | $5,300 – $7,200 |
| 150 ft (150 linear ft) | $3,550 – $6,450 | $5,700 – $8,600 | $7,850 – $10,700 |
| 200 ft (200 linear ft) | $4,700 – $8,550 | $7,600 – $11,400 | $10,400 – $14,300 |
Who does the work: Charleston trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Charleston the blend is 0.90.
Carpenters (47-2031), 40% of the weighting: a median of $24.22 an hour, 17% below the US median of $29.12. The middle half of them earn between $21.37 and $29.52 an hour. About 1,240 work in the metro. That is 31.5 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 40%) the local median is $20.98 an hour, which is 7% below the national $22.66. The middle half of them earn between $18.00 and $24.49 an hour. BLS counts 3,710 of them working in the area, 94.1 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
Sheet metal workers (47-2211), 20% of the weighting: a median of $28.68 an hour, 3% below the US median of $29.71. The middle half of them earn between $24.01 and $31.82 an hour. About 270 work in the metro. That is 6.8 per 10,000 jobs, compared with 7.7 nationally, so the supply of crews looks typical.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $190 to the midpoint estimate; the 25th percentile takes off about $100. That is a swing of roughly 1.4% to 2.7% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Charleston-North Charleston has 394,170 jobs in total (BLS, May 2025), ranking 66th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $21.37 | $24.22 | $29.52 | $29.12 | 0.83 | metro |
| Construction laborers (47-2061) | 40% | $18.00 | $20.98 | $24.49 | $22.66 | 0.93 | metro |
| Sheet metal workers (47-2211) | 20% | $24.01 | $28.68 | $31.82 | $29.71 | 0.97 | metro |
| Blended | 100% | 0.90 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,700 to $8,600 for Charleston, SC is attached.
Take this estimate with you: PDF report, $9
The report lays out the aluminum fence numbers for Charleston, SC line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in Charleston: your questions
+How much does it cost to install an aluminum fence in Charleston?
For 150 linear ft, expect $3,550 to $10,700 in the Charleston area. A standard-spec job lands at $5,700 to $8,600. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in Charleston?
About $23.50 to $70.50 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in Charleston or Hilton Head?
Hilton Head is 65 miles away. The midpoint for 150 linear ft there is $7,100, which is 1% less than Charleston ($7,150). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Charleston?
About 33% at the midpoint, or $2,350 out of $7,150. Materials are 66% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in Charleston?
$3,550 to $10,700. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in Charleston?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Charleston area (our national range of $40 to $150 scaled by the local price level).
+Is Charleston expensive for aluminum fence compared with the rest of South Carolina?
Charleston is 1% above the South Carolina statewide estimate ($7,050 at the midpoint). We cover 7 metros in South Carolina; see the state page to compare them.
+What do carpenters earn in Charleston?
The BLS median is $24.22 an hour in the Charleston area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.37 to $29.52.
+What do basic and premium aluminum fence work cost in Charleston?
For 150 linear ft, basic work runs $3,550 to $6,450 and premium work $7,850 to $10,700. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+Is there a bad season to install an aluminum fence in Charleston?
Not from a temperature point of view. NOAA's 1991-2020 normals show no month with a freezing-level overnight low or a 90°F-plus average high, so timing is mostly about contractor availability and rain.
+What does "add one gate" add in Charleston?
$190 to $840, from a national range scaled by the local wage and goods indexes.
Aluminum fence near Charleston
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.