Aluminum fence cost in Dayton, OH
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $3,750 – $11,200
- Per linear ft
- $24.50 – $73.50
- before permit
- Versus US midpoint
- −2%
- US $7,600
- Rank of 300 metros
- #123
- 1 = most expensive
If you want to install an aluminum fence in Dayton, plan on $3,750 to $11,200 for 150 linear ft, all in. Per linear ft, that is $24.50 to $73.50 for materials and labor, with the permit on top. The local midpoint lands close to the national one. Building materials run about 6% below the US average here (BEA goods price index 93.6).
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Dayton, OH, standard level
$5,950 to $8,950
About $39.50 to $59 per linear ft before permits. Labor is about 38% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,600 | $5,550 |
| Labor | $2,350 | $3,300 |
| Permits and fees | $70 | $110 |
| Total | $5,950 | $8,950 |
Cost breakdown for 150 linear ft in Dayton, OH
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,100 | $4,550 | $7,000 | 61% |
| Labor | $1,600 | $2,800 | $4,000 | 38% |
| Permits and fees | $35 | $90 | $140 | 1% |
| Total | $3,750 | $7,450 | $11,200 | 100% |
Where the Dayton price comes from
Labor is 38% of the midpoint bill here, against 35% nationally. The mix of trades behind this job is carpenters (40%), construction laborers (40%), sheet metal workers (20%). We weight each trade's local median wage by that share and compare it with the national median. In Dayton the blended ratio comes out at 1.07.
On the materials line, the BEA goods price index for the Dayton metro is 93.6 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,550, compared with $4,900 at national prices. Permit and inspection fees are scaled by the broader index (92.7) and land at $35 to $140.
Optional extras in Dayton
Extras are quoted nationally and then scaled to Dayton by the average of the local wage index (1.07) and goods index (0.94), a factor of 1.00. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $200 – $900 |
Why two Dayton quotes can differ
Permit
A fence permit runs $40-$150.
Style
Aluminum picket runs $25-$50 per linear foot installed, ornamental fence $40-$75, and privacy designs $75-$130 (HomeGuide).
Soil and slope
Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.
How Dayton compares
Of the five closest metros, 2 are cheaper than Dayton. Lexington is the lowest at about $7,250 (midpoint, 150 linear ft), 120 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Dayton, OHthis page | $3,750 – $11,200 | $7,450 | |
| Cincinnati, OH55 miles | $3,800 – $11,300 | $7,550 | +1% |
| Columbus, OH70 miles | $3,950 – $11,700 | $7,800 | +5% |
| Fort Wayne, IN100 miles | $3,650 – $11,000 | $7,300 | −2% |
| Indianapolis, IN105 miles | $3,750 – $11,300 | $7,500 | +1% |
| Lexington, KY120 miles | $3,600 – $10,900 | $7,250 | −3% |
| Ohio (statewide) | $3,800 – $11,400 | $7,600 | +2% |
| United States | $3,800 – $11,400 | $7,600 | +2% |
Across 300 US metros, Dayton comes in at #123 from the top. The priciest is Honolulu, HI at $9,700; the cheapest is Brownsville, TX at $6,500 (midpoints, 150 linear ft). Statewide, Dayton is 2% below the Ohio figure.
Other Ohio metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Columbus, OH | 1,105,580 jobs | $3,950 – $11,700 | $7,800 | +5% |
| Cincinnati, OH | 1,101,030 jobs | $3,800 – $11,300 | $7,550 | +1% |
| Cleveland, OH | 1,031,130 jobs | $3,850 – $11,400 | $7,650 | +2% |
| Akron, OH | 319,560 jobs | $3,850 – $11,500 | $7,650 | +3% |
| Toledo, OH | 291,530 jobs | $3,800 – $11,300 | $7,550 | +1% |
| Canton, OH | 163,080 jobs | $3,750 – $11,200 | $7,450 | level |
Cities with a workforce like Dayton's
Big cities and small ones price differently, so here is Dayton against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Allentown, PA | 377,180 jobs | $3,850 – $11,500 | $7,700 | +3% |
| Greensboro, NC | 365,410 jobs | $3,500 – $10,600 | $7,050 | −6% |
| Tucson, AZ | 389,630 jobs | $3,500 – $10,600 | $7,050 | −5% |
| Little Rock, AR | 358,210 jobs | $3,300 – $10,100 | $6,700 | −10% |
Planning more than one job in Dayton?
Because every project leans on different trades, Dayton's wage level does not move all prices equally. Against the US midpoint, inground pool runs +1% and vinyl fence −4%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,350 – $8,800 | −4% |
| Wood fence | 150 linear ft | $3,000 – $7,450 | −3% |
| Chain-link fence | 150 linear ft | $1,500 – $6,250 | +1% |
| Inground pool | 450 sq ft | $36,600 – $114,000 | +1% |
Dayton: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Dayton wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$3,750 to $6,700
Standard picket or ornamental, 4 ft
Standard
$5,950 to $8,950
Ornamental pool-code fence, 4-5 ft
Premium
$8,200 to $11,200
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,500 – $4,500 | $4,000 – $6,000 | $5,500 – $7,500 |
| 150 ft (150 linear ft) | $3,750 – $6,700 | $5,950 – $8,950 | $8,200 – $11,200 |
| 200 ft (200 linear ft) | $5,000 – $8,950 | $7,950 – $11,900 | $10,900 – $14,800 |
Climate in Dayton: timing your aluminum fence job
We use NOAA's 1991-2020 climate normals for Dayton Mcd (5 miles from the city center). These are 30-year monthly averages, not forecasts.
March through November is the stretch where exterior installation runs into the fewest weather problems in Dayton (9 of 12 months). January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Dayton gets about 42 inches of precipitation in a normal year, including roughly 12 inches of snow. The wettest months are April, May and June (4.5 inches in April). Inside the workable window, September and October are the driest, at 3.0 and 3.0 inches. The station averages about 39 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 36 | 20 | 3.2 | Cold |
| Feb | 40 | 23 | 2.4 | Cold |
| Mar | 51 | 31 | 3.5 | Workable |
| Apr | 64 | 41 | 4.5 | Workable |
| May | 75 | 53 | 4.4 | Workable |
| Jun | 84 | 62 | 4.4 | Workable |
| Jul | 87 | 66 | 4.0 | Workable |
| Aug | 86 | 64 | 3.1 | Workable |
| Sep | 79 | 56 | 3.0 | Workable |
| Oct | 66 | 44 | 3.0 | Workable |
| Nov | 52 | 33 | 3.0 | Workable |
| Dec | 41 | 26 | 3.1 | Cold |
Dayton labor market for aluminum fence
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Dayton is 1.07 times the national level.
For carpenters (47-2031, weighted 40%) the local median is $28.04 an hour, which is 4% below the national $29.12. The middle half of them earn between $23.03 and $31.60 an hour. BLS counts 950 of them working in the area, 25.5 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Construction laborers (47-2061), 40% of the weighting: a median of $25.48 an hour, 12% above the US median of $22.66. The middle half of them earn between $22.00 and $35.00 an hour. About 1,390 work in the metro. That is 37.3 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
For sheet metal workers (47-2211, weighted 20%) the local median is $34.77 an hour, which is 17% above the national $29.71. The middle half of them earn between $28.65 and $39.18 an hour. BLS counts 220 of them working in the area, 5.9 for every 10,000 jobs (US: 7.7), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($31.60 an hour) instead of the median, the labor line grows by about $130. At the 25th percentile ($23.03) it shrinks by about $180. The total moves by 1.7% or 2.4%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 372,660 jobs in the Dayton-Kettering-Beavercreek area. That makes it the 70th largest of the 300 metros we cover, with 0.24% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $23.03 | $28.04 | $31.60 | $29.12 | 0.96 | metro |
| Construction laborers (47-2061) | 40% | $22.00 | $25.48 | $35.00 | $22.66 | 1.12 | metro |
| Sheet metal workers (47-2211) | 20% | $28.65 | $34.77 | $39.18 | $29.71 | 1.17 | metro |
| Blended | 100% | 1.07 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,950 to $8,950 for Dayton, OH is attached.
A detailed PDF report of this estimate, $9
The report lays out the aluminum fence numbers for Dayton, OH line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in Dayton: your questions
+How much does it cost to install an aluminum fence in Dayton?
For 150 linear ft, expect $3,750 to $11,200 in the Dayton area. A standard-spec job lands at $5,950 to $8,950. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in Dayton?
About $24.50 to $73.50 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in Dayton or Cincinnati?
Cincinnati is 55 miles away. The midpoint for 150 linear ft there is $7,550, which is 1% more than Dayton ($7,450). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Dayton?
About 38% at the midpoint, or $2,800 out of $7,450. Materials are 61% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in Dayton?
$3,750 to $11,200. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in Dayton?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Dayton area (our national range of $40 to $150 scaled by the local price level).
+Is Dayton expensive for aluminum fence compared with the rest of Ohio?
Dayton is 2% below the Ohio statewide estimate ($7,600 at the midpoint). We cover 8 metros in Ohio; see the state page to compare them.
+What do carpenters earn in Dayton?
The BLS median is $28.04 an hour in the Dayton area, compared with $29.12 nationally. The 25th to 75th percentile range is $23.03 to $31.60.
+What do basic and premium aluminum fence work cost in Dayton?
For 150 linear ft, basic work runs $3,750 to $6,700 and premium work $8,200 to $11,200. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+When is the best time to install an aluminum fence in Dayton?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. September and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Dayton?
$200 to $900, from a national range scaled by the local wage and goods indexes.
Aluminum fence near Dayton
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.