Aluminum fence cost in Utica, NY
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $3,800 – $11,400
- Per linear ft
- $25 – $75
- before permit
- Versus US midpoint
- Level
- US $7,600
- Rank of 300 metros
- #110
- 1 = most expensive
Local price for an aluminum fence in the Utica area: $3,800 to $11,400 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Building materials run about 0% below the US average here (BEA goods price index 99.7).
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Utica, NY, standard level
$6,050 to $9,100
About $40 to $60 per linear ft before permits. Labor is about 35% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,800 | $5,900 |
| Labor | $2,150 | $3,050 |
| Permits and fees | $70 | $110 |
| Total | $6,050 | $9,100 |
Cost breakdown for 150 linear ft in Utica, NY
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,250 | $4,850 | $7,500 | 64% |
| Labor | $1,500 | $2,600 | $3,750 | 35% |
| Permits and fees | $35 | $90 | $140 | 1% |
| Total | $3,800 | $7,550 | $11,400 | 100% |
Where the Utica price comes from
The wage side of the estimate leans on carpenters, who do 40% of the hours on a typical job. Their local median is $28.62 an hour. Add the other trades involved and the blended wage index for Utica is 1.00 (US = 1.00), which puts labor at 35% of the total.
Materials are scaled with BEA's regional price parity for goods. Utica is at 99.7 against 100 for the US, so a materials line of $4,900 nationally becomes $4,850 here (midpoint, 150 linear ft). Permits follow the all-items index of 92.7: $35 to $140.
How Utica compares
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $7,550 to $7,750 across Utica and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Utica, NYthis page | $3,800 – $11,400 | $7,550 | |
| Syracuse, NY55 miles | $3,850 – $11,500 | $7,650 | +1% |
| Albany, NY75 miles | $3,900 – $11,600 | $7,750 | +2% |
| Binghamton, NY90 miles | $3,850 – $11,500 | $7,700 | +2% |
| Kingston, NY105 miles | $3,850 – $11,500 | $7,700 | +2% |
| Pittsfield, MA120 miles | $3,800 – $11,400 | $7,600 | level |
| New York (statewide) | $4,250 – $12,700 | $8,450 | +12% |
| United States | $3,800 – $11,400 | $7,600 | level |
Out of the 300 metros we cover, Utica ranks #110 for the cost of this job (#1 is the most expensive). Statewide, Utica is 11% below the New York figure.
Elsewhere in New York
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| New York, NY | 9,492,000 jobs | $4,400 – $13,200 | $8,800 | +16% |
| Buffalo, NY | 534,550 jobs | $3,900 – $11,700 | $7,800 | +3% |
| Rochester, NY | 494,280 jobs | $3,800 – $11,400 | $7,600 | +1% |
| Albany, NY | 449,410 jobs | $3,900 – $11,600 | $7,750 | +2% |
| Syracuse, NY | 300,130 jobs | $3,850 – $11,500 | $7,650 | +1% |
| Poughkeepsie, NY | 268,970 jobs | $4,150 – $12,500 | $8,300 | +10% |
Metros of a similar size
Big cities and small ones price differently, so here is Utica against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Greeley, CO | 119,540 jobs | $3,600 – $10,900 | $7,250 | −4% |
| Longview, TX | 118,060 jobs | $3,300 – $10,000 | $6,650 | −12% |
| Kingsport, TN | 119,560 jobs | $3,550 – $10,700 | $7,100 | −6% |
| Columbus, GA | 116,380 jobs | $3,300 – $10,200 | $6,750 | −11% |
The best months for aluminum fence in Utica
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Utica Oneida Co Ap (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Utica are April through November: 8 of 12. Outside them, January, February, March and December have an average daytime high under 45°F.
In January, February, March and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Utica gets about 44 inches of precipitation in a normal year. The wettest months are June, August and October (4.7 inches in August). Inside the workable window, September and November are the driest, at 3.5 and 3.6 inches. The station averages about 5 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 30 | 14 | 2.6 | Cold |
| Feb | 32 | 15 | 2.3 | Cold |
| Mar | 41 | 23 | 3.0 | Cold |
| Apr | 55 | 35 | 3.9 | Workable |
| May | 68 | 46 | 3.9 | Workable |
| Jun | 76 | 55 | 4.5 | Workable |
| Jul | 81 | 60 | 4.2 | Workable |
| Aug | 79 | 58 | 4.7 | Workable |
| Sep | 72 | 51 | 3.5 | Workable |
| Oct | 59 | 41 | 4.3 | Workable |
| Nov | 46 | 31 | 3.6 | Workable |
| Dec | 35 | 21 | 3.6 | Cold |
Utica: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Utica. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from pool fence (100 linear ft) to 200 ft (200 linear ft).
Basic
$3,800 to $6,800
Standard picket or ornamental, 4 ft
Standard
$6,050 to $9,100
Ornamental pool-code fence, 4-5 ft
Premium
$8,350 to $11,400
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,550 – $4,550 | $4,050 – $6,100 | $5,600 – $7,600 |
| 150 ft (150 linear ft) | $3,800 – $6,800 | $6,050 – $9,100 | $8,350 – $11,400 |
| 200 ft (200 linear ft) | $5,000 – $9,050 | $8,050 – $12,100 | $11,100 – $15,100 |
Optional extras in Utica
Add-ons start from national price ranges and are scaled by 1.00 for Utica, which is the average of the area's wage index (1.00) and goods price index (1.00). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $200 – $900 |
Who does the work: Utica trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Utica the blend is 1.00.
Carpenters (47-2031), 40% of the weighting: a median of $28.62 an hour, in line with the US median of $29.12. The middle half of them earn between $24.07 and $34.34 an hour. About 380 work in the metro. That is 32.1 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 40%) the local median is $23.90 an hour, which is 5% above the national $22.66. The middle half of them earn between $21.66 and $30.48 an hour. BLS counts 550 of them working in the area, 46.5 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
Sheet metal workers (47-2211), 20% of the weighting: a median of $27.16 an hour, 9% below the US median of $29.71. The middle half of them earn between $23.10 and $36.50 an hour. About 40 work in the metro. That is 3.4 per 10,000 jobs, compared with 7.7 nationally, so expect fewer local crews to bid.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $210 to the midpoint estimate; the 25th percentile takes off about $160. That is a swing of roughly 2.2% to 2.7% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Utica-Rome has 118,390 jobs in total (BLS, May 2025), ranking 185th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $24.07 | $28.62 | $34.34 | $29.12 | 0.98 | metro |
| Construction laborers (47-2061) | 40% | $21.66 | $23.90 | $30.48 | $22.66 | 1.05 | metro |
| Sheet metal workers (47-2211) | 20% | $23.10 | $27.16 | $36.50 | $29.71 | 0.91 | metro |
| Blended | 100% | 1.00 | |||||
Related projects, priced for Utica
Jobs that often go together with aluminum fence are priced below at their usual sizes, using the same Utica wage and price inputs. Compared with national midpoints, inground pool comes out highest (+6%) and vinyl fence lowest (level); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,550 – $9,150 | level |
| Wood fence | 150 linear ft | $3,050 – $7,650 | level |
| Chain-link fence | 150 linear ft | $1,550 – $6,250 | +1% |
| Inground pool | 450 sq ft | $38,300 – $119,500 | +6% |
Why two Utica quotes can differ
Pool codes
Many codes require a pool barrier with gaps under 4 inches, which influences the style you can buy.
Permit
A fence permit runs $40-$150.
Style
Aluminum picket runs $25-$50 per linear foot installed, ornamental fence $40-$75, and privacy designs $75-$130 (HomeGuide).
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,050 to $9,100 for Utica, NY is attached.
Take this estimate with you: PDF report, $9
The report lays out the aluminum fence numbers for Utica, NY line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in Utica: your questions
+How much does it cost to install an aluminum fence in Utica?
For 150 linear ft, expect $3,800 to $11,400 in the Utica area. A standard-spec job lands at $6,050 to $9,100. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in Utica?
About $25 to $75 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in Utica or Syracuse?
Syracuse is 55 miles away. The midpoint for 150 linear ft there is $7,650, which is 1% more than Utica ($7,550). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Utica?
About 35% at the midpoint, or $2,600 out of $7,550. Materials are 64% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in Utica?
$3,800 to $11,400. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in Utica?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Utica area (our national range of $40 to $150 scaled by the local price level).
+Is Utica expensive for aluminum fence compared with the rest of New York?
Utica is 11% below the New York statewide estimate ($8,450 at the midpoint). We cover 9 metros in New York; see the state page to compare them.
+What do carpenters earn in Utica?
The BLS median is $28.62 an hour in the Utica area, compared with $29.12 nationally. The 25th to 75th percentile range is $24.07 to $34.34.
+What do basic and premium aluminum fence work cost in Utica?
For 150 linear ft, basic work runs $3,800 to $6,800 and premium work $8,350 to $11,400. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+When is the best time to install an aluminum fence in Utica?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through November. September and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Utica?
$200 to $900, from a national range scaled by the local wage and goods indexes.
Aluminum fence near Utica
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.