Aluminum fence cost in Santa Fe, NM
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $3,600 – $10,900
- Per linear ft
- $23.50 – $71.50
- before permit
- Versus US midpoint
- −5%
- US $7,600
- Rank of 300 metros
- #166
- 1 = most expensive
If you want to install an aluminum fence in Santa Fe, plan on $3,600 to $10,900 for 150 linear ft, all in. Per linear ft, that is $23.50 to $71.50 for materials and labor, with the permit on top. The local midpoint runs 5% lower than the national one. Building materials run about 4% below the US average here (BEA goods price index 96.1).
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Santa Fe, NM, standard level
$5,800 to $8,700
About $38 to $57 per linear ft before permits. Labor is about 34% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,700 | $5,700 |
| Labor | $2,050 | $2,850 |
| Permits and fees | $70 | $120 |
| Total | $5,800 | $8,700 |
Cost breakdown for 150 linear ft in Santa Fe, NM
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,150 | $4,700 | $7,200 | 65% |
| Labor | $1,400 | $2,450 | $3,500 | 34% |
| Permits and fees | $40 | $95 | $150 | 1% |
| Total | $3,600 | $7,250 | $10,900 | 100% |
Why Santa Fe prices look the way they do
We price the labor side from BLS wage data for 3 trades: carpenters at 40%, construction laborers at 40%, sheet metal workers at 20%. Weighted together, Santa Fe wages are 0.93 times the national level. Labor makes up about 34% of the midpoint estimate (35% at national prices).
On the materials line, the BEA goods price index for the Santa Fe metro is 96.1 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,700, compared with $4,900 at national prices. Permit and inspection fees are scaled by the broader index (98.8) and land at $40 to $150.
Data note: 20% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Santa Fe. The wage table below marks each row.
Santa Fe: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Santa Fe wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$3,600 to $6,500
Standard picket or ornamental, 4 ft
Standard
$5,800 to $8,700
Ornamental pool-code fence, 4-5 ft
Premium
$7,950 to $10,900
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,400 – $4,350 | $3,900 – $5,800 | $5,350 – $7,300 |
| 150 ft (150 linear ft) | $3,600 – $6,500 | $5,800 – $8,700 | $7,950 – $10,900 |
| 200 ft (200 linear ft) | $4,800 – $8,650 | $7,700 – $11,500 | $10,600 – $14,400 |
Santa Fe against nearby metros and the rest of New Mexico
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $6,800 to $7,250 across Santa Fe and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Santa Fe, NMthis page | $3,600 – $10,900 | $7,250 | |
| Albuquerque, NM40 miles | $3,600 – $10,800 | $7,200 | level |
| Pueblo, CO200 miles | $3,550 – $10,800 | $7,150 | −1% |
| Las Cruces, NM225 miles | $3,550 – $10,700 | $7,100 | −2% |
| Amarillo, TX230 miles | $3,350 – $10,200 | $6,800 | −6% |
| Colorado Springs, CO240 miles | $3,600 – $10,800 | $7,200 | level |
| New Mexico (statewide) | $3,550 – $10,700 | $7,150 | −1% |
| United States | $3,800 – $11,400 | $7,600 | +5% |
Across 300 US metros, Santa Fe comes in at #166 from the top. The priciest is Honolulu, HI at $9,700; the cheapest is Brownsville, TX at $6,500 (midpoints, 150 linear ft). Statewide, Santa Fe is 1% above the New Mexico figure.
Other New Mexico metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Albuquerque, NM | 404,700 jobs | $3,600 – $10,800 | $7,200 | level |
| Las Cruces, NM | 80,000 jobs | $3,550 – $10,700 | $7,100 | −2% |
Cities with a workforce like Santa Fe's
Big cities and small ones price differently, so here is Santa Fe against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Pueblo, CO | 61,780 jobs | $3,550 – $10,800 | $7,150 | −1% |
| Decatur, AL | 61,240 jobs | $3,400 – $10,400 | $6,900 | −4% |
| Hattiesburg, MS | 62,230 jobs | $3,350 – $10,300 | $6,850 | −6% |
| Dothan, AL | 60,720 jobs | $3,250 – $10,000 | $6,600 | −8% |
Optional extras in Santa Fe
Extras are quoted nationally and then scaled to Santa Fe by the average of the local wage index (0.93) and goods index (0.96), a factor of 0.95. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $190 – $850 |
Related projects, priced for Santa Fe
Because every project leans on different trades, Santa Fe's wage level does not move all prices equally. Against the US midpoint, vinyl fence runs −4% and inground pool −10%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,350 – $8,750 | −4% |
| Wood fence | 150 linear ft | $2,900 – $7,300 | −5% |
| Chain-link fence | 150 linear ft | $1,450 – $5,800 | −6% |
| Inground pool | 450 sq ft | $32,400 – $101,500 | −10% |
Santa Fe labor market for aluminum fence
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Santa Fe is 0.93 times the national level.
For carpenters (47-2031, weighted 40%) the local median is $28.57 an hour, which is in line with the national $29.12. The middle half of them earn between $23.73 and $29.66 an hour. BLS counts 210 of them working in the area, 34.0 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Construction laborers (47-2061), 40% of the weighting: a median of $20.18 an hour, 11% below the US median of $22.66. The middle half of them earn between $17.99 and $22.67 an hour. About 530 work in the metro. That is 85.8 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
Sheet metal workers (47-2211) carry 20% of the labor weighting. BLS does not publish this trade for the Santa Fe metro, so we used the New Mexico statewide median: $27.27 an hour against $29.71 for the US. The middle half of them earn between $20.00 and $38.05 an hour.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($29.66 an hour) instead of the median, the labor line grows by about $40. At the 25th percentile ($23.73) it shrinks by about $170. The total moves by 0.5% or 2.4%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 61,770 jobs in the Santa Fe area. That makes it the 282nd largest of the 300 metros we cover, with 0.04% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $23.73 | $28.57 | $29.66 | $29.12 | 0.98 | metro |
| Construction laborers (47-2061) | 40% | $17.99 | $20.18 | $22.67 | $22.66 | 0.89 | metro |
| Sheet metal workers (47-2211) | 20% | $20.00 | $27.27 | $38.05 | $29.71 | 0.92 | state |
| Blended | 100% | 0.93 | |||||
Climate in Santa Fe: timing your aluminum fence job
We use NOAA's 1991-2020 climate normals for Santa Fe 2 (5 miles from the city center). These are 30-year monthly averages, not forecasts.
February through November is the stretch where exterior installation runs into the fewest weather problems in Santa Fe (10 of 12 months). January and December have an average daytime high under 45°F.
In January and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Santa Fe gets about 13 inches of precipitation in a normal year, including roughly 20 inches of snow. The wettest months are July, August and September (2.3 inches in July). Inside the workable window, February and April are the driest, at 0.5 and 0.6 inches. The station averages about 24 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 43 | 18 | 0.6 | Cold |
| Feb | 48 | 21 | 0.5 | Workable |
| Mar | 57 | 26 | 0.7 | Workable |
| Apr | 64 | 32 | 0.6 | Workable |
| May | 74 | 41 | 0.9 | Workable |
| Jun | 84 | 50 | 0.9 | Workable |
| Jul | 86 | 55 | 2.3 | Workable |
| Aug | 83 | 54 | 2.0 | Workable |
| Sep | 78 | 47 | 1.4 | Workable |
| Oct | 66 | 35 | 1.3 | Workable |
| Nov | 53 | 24 | 0.8 | Workable |
| Dec | 43 | 18 | 0.8 | Cold |
Aluminum fence: what moves the price in Santa Fe
Soil and slope
Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.
Pool codes
Many codes require a pool barrier with gaps under 4 inches, which influences the style you can buy.
Permit
A fence permit runs $40-$150.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,800 to $8,700 for Santa Fe, NM is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Santa Fe, NM: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in Santa Fe: your questions
+How much does it cost to install an aluminum fence in Santa Fe?
For 150 linear ft, expect $3,600 to $10,900 in the Santa Fe area. A standard-spec job lands at $5,800 to $8,700. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in Santa Fe?
About $23.50 to $71.50 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in Santa Fe or Albuquerque?
Albuquerque is 40 miles away. The midpoint for 150 linear ft there is $7,200, which is 0% less than Santa Fe ($7,250). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Santa Fe?
About 34% at the midpoint, or $2,450 out of $7,250. Materials are 65% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in Santa Fe?
$3,600 to $10,900. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in Santa Fe?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Santa Fe area (our national range of $40 to $150 scaled by the local price level).
+Is Santa Fe expensive for aluminum fence compared with the rest of New Mexico?
Santa Fe is 1% above the New Mexico statewide estimate ($7,150 at the midpoint). We cover 3 metros in New Mexico; see the state page to compare them.
+What do carpenters earn in Santa Fe?
The BLS median is $28.57 an hour in the Santa Fe area, compared with $29.12 nationally. The 25th to 75th percentile range is $23.73 to $29.66.
+What do basic and premium aluminum fence work cost in Santa Fe?
For 150 linear ft, basic work runs $3,600 to $6,500 and premium work $7,950 to $10,900. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+When is the best time to install an aluminum fence in Santa Fe?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through November. February and April are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Santa Fe?
$190 to $850, from a national range scaled by the local wage and goods indexes.
Aluminum fence near Santa Fe
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.