Skip to content
CostLocal

Aluminum fence cost in Iowa City, IA

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (150 linear ft)
$3,550 – $10,700
Per linear ft
$23.50 – $70.50
before permit
Versus US midpoint
−6%
US $7,600
Rank of 300 metros
#183
1 = most expensive

If you want to install an aluminum fence in Iowa City, plan on $3,550 to $10,700 for 150 linear ft, all in. Per linear ft, that is $23.50 to $70.50 for materials and labor, with the permit on top. The local midpoint runs 6% lower than the national one. Building materials run about 6% below the US average here (BEA goods price index 93.7).

Estimate your aluminum fence cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Ornamental pool-code fence, 4-5 ft

Add-ons

Estimated cost for 150 linear ft in Iowa City, IA, standard level

$5,700 to $8,600

About $37.50 to $56.50 per linear ft before permits. Labor is about 35% of the bill.

Cost breakdown
PartLowHigh
Materials$3,600$5,550
Labor$2,050$2,900
Permits and fees$65$110
Total$5,700$8,600
Save and get a PDF report

Cost breakdown for 150 linear ft in Iowa City, IA

Part of the jobLowMidpointHighShare
Materials$2,100$4,550$7,05064%
Labor$1,450$2,500$3,55035%
Permits and fees$35$85$1401%
Total$3,550$7,150$10,700100%

Where the Iowa City price comes from

Labor is 35% of the midpoint bill here, against 35% nationally. The mix of trades behind this job is carpenters (40%), construction laborers (40%), sheet metal workers (20%). We weight each trade's local median wage by that share and compare it with the national median. In Iowa City the blended ratio comes out at 0.95.

On the materials line, the BEA goods price index for the Iowa City metro is 93.7 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,550, compared with $4,900 at national prices. Permit and inspection fees are scaled by the broader index (91.5) and land at $35 to $140.

Data note: 20% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Iowa City. The wage table below marks each row.

Iowa City against nearby metros and the rest of Iowa

Of the five closest metros, none is cheaper than Iowa City. Waterloo comes closest at about $7,250.

Comparison with nearby areas
AreaRangeMidpointvs. here
Iowa City, IAthis page$3,550 – $10,700$7,150
Cedar Rapids, IA40 miles$3,750 – $11,200$7,450+4%
Davenport, IA60 miles$3,800 – $11,300$7,550+6%
Dubuque, IA75 miles$3,700 – $11,000$7,350+3%
Waterloo, IA80 miles$3,650 – $10,900$7,250+2%
Des Moines, IA110 miles$3,700 – $11,100$7,400+3%
Iowa (statewide)$3,650 – $10,900$7,300+2%
United States$3,800 – $11,400$7,600+6%

Across 300 US metros, Iowa City comes in at #183 from the top. The priciest is Honolulu, HI at $9,700; the cheapest is Brownsville, TX at $6,500 (midpoints, 150 linear ft). Statewide, Iowa City is 2% below the Iowa figure.

Other Iowa metros

Iowa metros compared with Iowa City
MetroSizeRangeMidpointvs. here
Des Moines, IA404,130 jobs$3,700 – $11,100$7,400+3%
Davenport, IA180,450 jobs$3,800 – $11,300$7,550+6%
Cedar Rapids, IA139,260 jobs$3,750 – $11,200$7,450+4%
Waterloo, IA84,260 jobs$3,650 – $10,900$7,250+2%
Sioux City, IA75,010 jobs$3,600 – $10,800$7,200+1%
Dubuque, IA58,470 jobs$3,700 – $11,000$7,350+3%

Cities with a workforce like Iowa City's

Big cities and small ones price differently, so here is Iowa City against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Billings, MT93,800 jobs$3,700 – $11,100$7,400+4%
Oshkosh, WI93,750 jobs$3,950 – $11,700$7,800+9%
Barnstable, MA94,110 jobs$4,100 – $12,100$8,100+13%
Bremerton, WA93,740 jobs$4,200 – $12,500$8,300+16%

Iowa City labor market for aluminum fence

Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Iowa City is 0.95 times the national level.

For carpenters (47-2031, weighted 40%) the local median is $23.89 an hour, which is 18% below the national $29.12. The middle half of them earn between $21.98 and $29.70 an hour. BLS counts 360 of them working in the area, 38.4 for every 10,000 jobs (US: 43.1), so the local bench is about average.

Construction laborers (47-2061), 40% of the weighting: a median of $23.05 an hour, in line with the US median of $22.66. The middle half of them earn between $21.87 and $28.74 an hour. About 800 work in the metro. That is 85.3 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.

Sheet metal workers (47-2211) carry 20% of the labor weighting. BLS does not publish this trade for the Iowa City metro, so we used the Iowa statewide median: $31.95 an hour against $29.71 for the US. The middle half of them earn between $23.78 and $36.58 an hour.

Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($29.70 an hour) instead of the median, the labor line grows by about $210. At the 25th percentile ($21.98) it shrinks by about $70. The total moves by 2.9% or 1.0%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 93,760 jobs in the Iowa City area. That makes it the 214th largest of the 300 metros we cover, with 0.06% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)40%$21.98$23.89$29.70$29.120.82metro
Construction laborers (47-2061)40%$21.87$23.05$28.74$22.661.02metro
Sheet metal workers (47-2211)20%$23.78$31.95$36.58$29.711.08state
Blended100%0.95

Planning more than one job in Iowa City?

Because every project leans on different trades, Iowa City's wage level does not move all prices equally. Against the US midpoint, inground pool runs −1% and wood fence −8%.

Related projects with local prices
ProjectSizeRangevs. US
Vinyl fence150 linear ft$4,250 – $8,550−7%
Wood fence150 linear ft$2,800 – $7,050−8%
Chain-link fence150 linear ft$1,450 – $5,750−6%
Inground pool450 sq ft$35,600 – $111,000−1%

Aluminum fence: what moves the price in Iowa City

  • Pool codes

    Many codes require a pool barrier with gaps under 4 inches, which influences the style you can buy.

  • Permit

    A fence permit runs $40-$150.

  • Style

    Aluminum picket runs $25-$50 per linear foot installed, ornamental fence $40-$75, and privacy designs $75-$130 (HomeGuide).

Climate in Iowa City: timing your aluminum fence job

We use NOAA's 1991-2020 climate normals for Iowa City Muni Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.

March through November is the stretch where exterior installation runs into the fewest weather problems in Iowa City (9 of 12 months). January, February and December have an average daytime high under 45°F.

In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.

Iowa City gets about 36 inches of precipitation in a normal year. The wettest months are May, June and August (5.3 inches in June). Inside the workable window, March and November are the driest, at 2.2 and 2.2 inches. The station averages about 19 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, Iowa City Muni Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan31151.0Cold
Feb36191.2Cold
Mar50302.2Workable
Apr63403.8Workable
May73524.5Workable
Jun83625.3Workable
Jul86663.9Workable
Aug84633.9Workable
Sep78543.2Workable
Oct64423.0Workable
Nov49302.2Workable
Dec36201.4Cold

Extras that change the Iowa City total

Extras are quoted nationally and then scaled to Iowa City by the average of the local wage index (0.95) and goods index (0.94), a factor of 0.94. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.

Add-on prices
Add-onLocal range
Add one gate (flat)$190 – $850

Pick a size, pick a tier: aluminum fence pricing in Iowa City

Three bands are cut from the same cited range and localized for Iowa City wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.

Basic

$3,550 to $6,450

Standard picket or ornamental, 4 ft

Standard

$5,700 to $8,600

Ornamental pool-code fence, 4-5 ft

Premium

$7,850 to $10,700

Tall privacy slat or custom ornamental

Cost by size and quality level
SizeBasicStandardPremium
pool fence (100 linear ft)$2,400 – $4,300$3,850 – $5,750$5,300 – $7,200
150 ft (150 linear ft)$3,550 – $6,450$5,700 – $8,600$7,850 – $10,700
200 ft (200 linear ft)$4,750 – $8,550$7,600 – $11,400$10,500 – $14,300

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,700 to $8,600 for Iowa City, IA is attached.

A detailed PDF report of this estimate, $9

Multi-page report for Iowa City, IA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Aluminum fence in Iowa City: your questions

+How much does it cost to install an aluminum fence in Iowa City?

For 150 linear ft, expect $3,550 to $10,700 in the Iowa City area. A standard-spec job lands at $5,700 to $8,600. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for aluminum fence in Iowa City?

About $23.50 to $70.50 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $25 to $75.

+Is aluminum fence cheaper in Iowa City or Cedar Rapids?

Cedar Rapids is 40 miles away. The midpoint for 150 linear ft there is $7,450, which is 4% more than Iowa City ($7,150). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Iowa City?

About 35% at the midpoint, or $2,500 out of $7,150. Materials are 64% and permits 1%. Nationally, labor is 35%.

+What would 150 ft (150 linear ft) cost in Iowa City?

$3,550 to $10,700. Pick a different size in the estimator above to get your own number.

+Does aluminum fence need a permit in Iowa City?

Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Iowa City area (our national range of $40 to $150 scaled by the local price level).

+Is Iowa City expensive for aluminum fence compared with the rest of Iowa?

Iowa City is 2% below the Iowa statewide estimate ($7,300 at the midpoint). We cover 7 metros in Iowa; see the state page to compare them.

+What do carpenters earn in Iowa City?

The BLS median is $23.89 an hour in the Iowa City area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.98 to $29.70.

+What do basic and premium aluminum fence work cost in Iowa City?

For 150 linear ft, basic work runs $3,550 to $6,450 and premium work $7,850 to $10,700. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.

+When is the best time to install an aluminum fence in Iowa City?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "add one gate" add in Iowa City?

$190 to $850, from a national range scaled by the local wage and goods indexes.

Aluminum fence near Iowa City

Aluminum fence: all pricesAluminum fence in IowaAll projects in Iowa CityIowa cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.