Aluminum fence cost in Peoria, IL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,100 – $12,100
- Per linear ft
- $27 – $79.50
- before permit
- Versus US midpoint
- +7%
- US $7,600
- Rank of 300 metros
- #43
- 1 = most expensive
Local price for an aluminum fence in the Peoria area: $4,100 to $12,100 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 7% higher than the US figure. Carpenters earn a median of $36.19 an hour in the Peoria area, 24% above the US median of $29.12.
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Peoria, IL, standard level
$6,500 to $9,700
About $43 to $64 per linear ft before permits. Labor is about 43% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,600 | $5,550 |
| Labor | $2,850 | $4,050 |
| Permits and fees | $65 | $110 |
| Total | $6,500 | $9,700 |
Cost breakdown for 150 linear ft in Peoria, IL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,100 | $4,550 | $7,000 | 56% |
| Labor | $1,950 | $3,450 | $4,950 | 43% |
| Permits and fees | $35 | $85 | $140 | 1% |
| Total | $4,100 | $8,100 | $12,100 | 100% |
What is behind the Peoria number
We price the labor side from BLS wage data for 3 trades: carpenters at 40%, construction laborers at 40%, sheet metal workers at 20%. Weighted together, Peoria wages are 1.31 times the national level. Labor makes up about 43% of the midpoint estimate (35% at national prices).
Materials are scaled with BEA's regional price parity for goods. Peoria is at 93.6 against 100 for the US, so a materials line of $4,900 nationally becomes $4,550 here (midpoint, 150 linear ft). Permits follow the all-items index of 91.2: $35 to $140.
Why two Peoria quotes can differ
Pool codes
Many codes require a pool barrier with gaps under 4 inches, which influences the style you can buy.
Permit
A fence permit runs $40-$150.
Style
Aluminum picket runs $25-$50 per linear foot installed, ornamental fence $40-$75, and privacy designs $75-$130 (HomeGuide).
Planning more than one job in Peoria?
Jobs that often go together with aluminum fence are priced below at their usual sizes, using the same Peoria wage and price inputs. Compared with national midpoints, inground pool comes out highest (+17%) and vinyl fence lowest (+1%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,500 – $9,350 | +1% |
| Wood fence | 150 linear ft | $3,350 – $8,200 | +8% |
| Chain-link fence | 150 linear ft | $1,650 – $7,200 | +15% |
| Inground pool | 450 sq ft | $42,400 – $132,000 | +17% |
Optional extras in Peoria
Add-ons start from national price ranges and are scaled by 1.12 for Peoria, which is the average of the area's wage index (1.31) and goods price index (0.94). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $220 – $1,000 |
Who does the work: Peoria trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Peoria the blend is 1.31.
Carpenters (47-2031), 40% of the weighting: a median of $36.19 an hour, 24% above the US median of $29.12. The middle half of them earn between $24.14 and $48.02 an hour. About 780 work in the metro. That is 47.0 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.
For construction laborers (47-2061, weighted 40%) the local median is $30.27 an hour, which is 34% above the national $22.66. The middle half of them earn between $22.67 and $37.76 an hour. BLS counts 1,020 of them working in the area, 61.4 for every 10,000 jobs (US: 70.5), so the local bench is about average.
Sheet metal workers (47-2211), 20% of the weighting: a median of $41.89 an hour, 41% above the US median of $29.71. The middle half of them earn between $28.70 and $49.02 an hour. About 120 work in the metro. That is 7.2 per 10,000 jobs, compared with 7.7 nationally, so the supply of crews looks typical.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $430 to the midpoint estimate; the 25th percentile takes off about $430. That is a swing of roughly 5.4% to 5.3% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Peoria has 166,020 jobs in total (BLS, May 2025), ranking 141st by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $24.14 | $36.19 | $48.02 | $29.12 | 1.24 | metro |
| Construction laborers (47-2061) | 40% | $22.67 | $30.27 | $37.76 | $22.66 | 1.34 | metro |
| Sheet metal workers (47-2211) | 20% | $28.70 | $41.89 | $49.02 | $29.71 | 1.41 | metro |
| Blended | 100% | 1.31 | |||||
Is Peoria cheap or dear? The local comparison
Of the five closest metros, 4 are cheaper than Peoria. Davenport is the lowest at about $7,550 (midpoint, 150 linear ft), 65 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Peoria, ILthis page | $4,100 – $12,100 | $8,100 | |
| Bloomington, IL40 miles | $4,100 – $12,000 | $8,050 | −1% |
| Davenport, IA65 miles | $3,800 – $11,300 | $7,550 | −7% |
| Springfield, IL65 miles | $4,150 – $12,100 | $8,100 | level |
| Champaign, IL75 miles | $4,000 – $11,800 | $7,950 | −2% |
| Rockford, IL110 miles | $4,000 – $11,800 | $7,900 | −3% |
| Illinois (statewide) | $4,350 – $12,900 | $8,600 | +6% |
| United States | $3,800 – $11,400 | $7,600 | −6% |
Out of the 300 metros we cover, Peoria ranks #43 for the cost of this job (#1 is the most expensive). Statewide, Peoria is 6% below the Illinois figure.
Elsewhere in Illinois
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Chicago, IL | 4,513,280 jobs | $4,500 – $13,300 | $8,900 | +10% |
| Rockford, IL | 137,650 jobs | $4,000 – $11,800 | $7,900 | −3% |
| Champaign, IL | 105,500 jobs | $4,000 – $11,800 | $7,950 | −2% |
| Springfield, IL | 100,810 jobs | $4,150 – $12,100 | $8,100 | level |
| Bloomington, IL | 88,110 jobs | $4,100 – $12,000 | $8,050 | −1% |
Metros of a similar size
Big cities and small ones price differently, so here is Peoria against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Lubbock, TX | 166,780 jobs | $3,250 – $10,000 | $6,650 | −18% |
| Montgomery, AL | 165,550 jobs | $3,400 – $10,300 | $6,850 | −15% |
| Atlantic City, NJ | 168,700 jobs | $4,100 – $12,100 | $8,100 | level |
| Spartanburg, SC | 165,150 jobs | $3,550 – $10,700 | $7,100 | −12% |
The best months for aluminum fence in Peoria
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Peoria Gtr Peoria Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Peoria are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Peoria gets about 38 inches of precipitation in a normal year, including roughly 26 inches of snow. The wettest months are April, May and June (4.7 inches in May). Inside the workable window, March and November are the driest, at 2.7 and 2.7 inches. The station averages about 23 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 34 | 18 | 2.1 | Cold |
| Feb | 39 | 21 | 2.0 | Cold |
| Mar | 51 | 32 | 2.7 | Workable |
| Apr | 64 | 42 | 4.0 | Workable |
| May | 74 | 53 | 4.7 | Workable |
| Jun | 83 | 62 | 3.7 | Workable |
| Jul | 86 | 66 | 3.5 | Workable |
| Aug | 85 | 64 | 3.3 | Workable |
| Sep | 78 | 56 | 3.5 | Workable |
| Oct | 65 | 44 | 3.2 | Workable |
| Nov | 51 | 33 | 2.7 | Workable |
| Dec | 39 | 23 | 2.2 | Cold |
Pick a size, pick a tier: aluminum fence pricing in Peoria
The cited range is split into basic, standard and premium bands, then scaled to Peoria. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from pool fence (100 linear ft) to 200 ft (200 linear ft).
Basic
$4,100 to $7,300
Standard picket or ornamental, 4 ft
Standard
$6,500 to $9,700
Ornamental pool-code fence, 4-5 ft
Premium
$8,900 to $12,100
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,750 – $4,900 | $4,350 – $6,500 | $5,950 – $8,100 |
| 150 ft (150 linear ft) | $4,100 – $7,300 | $6,500 – $9,700 | $8,900 – $12,100 |
| 200 ft (200 linear ft) | $5,450 – $9,700 | $8,650 – $12,900 | $11,800 – $16,100 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,500 to $9,700 for Peoria, IL is attached.
Detailed aluminum fence report for Peoria, IL, $9
The report lays out the aluminum fence numbers for Peoria, IL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in Peoria: your questions
+How much does it cost to install an aluminum fence in Peoria?
For 150 linear ft, expect $4,100 to $12,100 in the Peoria area. A standard-spec job lands at $6,500 to $9,700. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in Peoria?
About $27 to $79.50 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in Peoria or Bloomington?
Bloomington is 40 miles away. The midpoint for 150 linear ft there is $8,050, which is 1% less than Peoria ($8,100). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Peoria?
About 43% at the midpoint, or $3,450 out of $8,100. Materials are 56% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in Peoria?
$4,100 to $12,100. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in Peoria?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Peoria area (our national range of $40 to $150 scaled by the local price level).
+Is Peoria expensive for aluminum fence compared with the rest of Illinois?
Peoria is 6% below the Illinois statewide estimate ($8,600 at the midpoint). We cover 6 metros in Illinois; see the state page to compare them.
+What do carpenters earn in Peoria?
The BLS median is $36.19 an hour in the Peoria area, compared with $29.12 nationally. The 25th to 75th percentile range is $24.14 to $48.02.
+What do basic and premium aluminum fence work cost in Peoria?
For 150 linear ft, basic work runs $4,100 to $7,300 and premium work $8,900 to $12,100. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+When is the best time to install an aluminum fence in Peoria?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Peoria?
$220 to $1,000, from a national range scaled by the local wage and goods indexes.
Aluminum fence near Peoria
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.