Aluminum fence cost in Macon, GA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $3,350 – $10,300
- Per linear ft
- $22 – $67.50
- before permit
- Versus US midpoint
- −10%
- US $7,600
- Rank of 300 metros
- #271
- 1 = most expensive
If you want to install an aluminum fence in Macon, plan on $3,350 to $10,300 for 150 linear ft, all in. Per linear ft, that is $22 to $67.50 for materials and labor, with the permit on top. The local midpoint runs 10% lower than the national one. Carpenters earn a median of $20.03 an hour in the Macon area, 31% below the US median of $29.12.
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Macon, GA, standard level
$5,450 to $8,200
About $36 to $54 per linear ft before permits. Labor is about 30% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,700 | $5,700 |
| Labor | $1,700 | $2,400 |
| Permits and fees | $65 | $100 |
| Total | $5,450 | $8,200 |
Cost breakdown for 150 linear ft in Macon, GA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,150 | $4,700 | $7,200 | 69% |
| Labor | $1,150 | $2,050 | $2,900 | 30% |
| Permits and fees | $35 | $85 | $130 | 1% |
| Total | $3,350 | $6,800 | $10,300 | 100% |
What is behind the Macon number
We price the labor side from BLS wage data for 3 trades: carpenters at 40%, construction laborers at 40%, sheet metal workers at 20%. Weighted together, Macon wages are 0.78 times the national level. Labor makes up about 30% of the midpoint estimate (35% at national prices).
On the materials line, the BEA goods price index for the Macon metro is 96.3 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,700, compared with $4,900 at national prices. Permit and inspection fees are scaled by the broader index (88.5) and land at $35 to $130.
Macon labor market for aluminum fence
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Macon is 0.78 times the national level.
For carpenters (47-2031, weighted 40%) the local median is $20.03 an hour, which is 31% below the national $29.12. The middle half of them earn between $16.47 and $27.05 an hour. BLS counts 70 of them working in the area, 7.4 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Construction laborers (47-2061), 40% of the weighting: a median of $19.23 an hour, 15% below the US median of $22.66. The middle half of them earn between $17.05 and $20.66 an hour. About 420 work in the metro. That is 44.2 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
For sheet metal workers (47-2211, weighted 20%) the local median is $24.03 an hour, which is 19% below the national $29.71. The middle half of them earn between $19.73 and $28.77 an hour. BLS counts 40 of them working in the area, 4.2 for every 10,000 jobs (US: 7.7), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($27.05 an hour) instead of the median, the labor line grows by about $250. At the 25th percentile ($16.47) it shrinks by about $130. The total moves by 3.7% or 1.9%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 95,030 jobs in the Macon-Bibb County area. That makes it the 211th largest of the 300 metros we cover, with 0.06% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $16.47 | $20.03 | $27.05 | $29.12 | 0.69 | metro |
| Construction laborers (47-2061) | 40% | $17.05 | $19.23 | $20.66 | $22.66 | 0.85 | metro |
| Sheet metal workers (47-2211) | 20% | $19.73 | $24.03 | $28.77 | $29.71 | 0.81 | metro |
| Blended | 100% | 0.78 | |||||
Specs and site conditions that change a Macon bid
Style
Aluminum picket runs $25-$50 per linear foot installed, ornamental fence $40-$75, and privacy designs $75-$130 (HomeGuide).
Soil and slope
Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.
Pool codes
Many codes require a pool barrier with gaps under 4 inches, which influences the style you can buy.
Cost by quality level and size in Macon
Three bands are cut from the same cited range and localized for Macon wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$3,350 to $6,150
Standard picket or ornamental, 4 ft
Standard
$5,450 to $8,200
Ornamental pool-code fence, 4-5 ft
Premium
$7,500 to $10,300
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,250 – $4,100 | $3,650 – $5,500 | $5,050 – $6,900 |
| 150 ft (150 linear ft) | $3,350 – $6,150 | $5,450 – $8,200 | $7,500 – $10,300 |
| 200 ft (200 linear ft) | $4,500 – $8,150 | $7,250 – $10,900 | $10,000 – $13,600 |
What nearby projects cost in Macon
Because every project leans on different trades, Macon's wage level does not move all prices equally. Against the US midpoint, vinyl fence runs −8% and chain-link fence −15%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,200 – $8,350 | −8% |
| Wood fence | 150 linear ft | $2,600 – $6,700 | −13% |
| Chain-link fence | 150 linear ft | $1,350 – $5,200 | −15% |
| Inground pool | 450 sq ft | $31,900 – $99,600 | −12% |
Add-ons priced for Macon
Extras are quoted nationally and then scaled to Macon by the average of the local wage index (0.78) and goods index (0.96), a factor of 0.87. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $170 – $780 |
Macon against nearby metros and the rest of Georgia
Same job, same size (150 linear ft), priced for the nearest metros. Atlanta is the priciest of the group at $7,300. Albany is the cheapest at $6,600.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Macon, GAthis page | $3,350 – $10,300 | $6,800 | |
| Warner Robins, GA25 miles | $3,500 – $10,600 | $7,050 | +4% |
| Atlanta, GA70 miles | $3,600 – $11,000 | $7,300 | +7% |
| Columbus, GA70 miles | $3,300 – $10,200 | $6,750 | −1% |
| Athens, GA80 miles | $3,350 – $10,200 | $6,800 | level |
| Albany, GA85 miles | $3,250 – $9,900 | $6,600 | −3% |
| Georgia (statewide) | $3,550 – $10,700 | $7,100 | +4% |
| United States | $3,800 – $11,400 | $7,600 | +11% |
Across 300 US metros, Macon comes in at #271 from the top. The priciest is Honolulu, HI at $9,700; the cheapest is Brownsville, TX at $6,500 (midpoints, 150 linear ft). Statewide, Macon is 4% below the Georgia figure.
Other Georgia metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Atlanta, GA | 2,889,670 jobs | $3,600 – $11,000 | $7,300 | +7% |
| Augusta, GA | 231,930 jobs | $3,500 – $10,600 | $7,100 | +4% |
| Savannah, GA | 198,360 jobs | $3,350 – $10,300 | $6,850 | level |
| Columbus, GA | 116,380 jobs | $3,300 – $10,200 | $6,750 | −1% |
| Gainesville, GA | 103,870 jobs | $3,400 – $10,300 | $6,850 | level |
| Athens, GA | 95,800 jobs | $3,350 – $10,200 | $6,800 | level |
Cities with a workforce like Macon's
Big cities and small ones price differently, so here is Macon against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Fort Smith, AR | 95,560 jobs | $3,250 – $9,950 | $6,600 | −3% |
| Barnstable, MA | 94,110 jobs | $4,100 – $12,100 | $8,100 | +19% |
| Athens, GA | 95,800 jobs | $3,350 – $10,200 | $6,800 | level |
| Billings, MT | 93,800 jobs | $3,700 – $11,100 | $7,400 | +9% |
Climate in Macon: timing your aluminum fence job
We use NOAA's 1991-2020 climate normals for Macon Middle Ga Rgnl Ap (10 miles from the city center). These are 30-year monthly averages, not forecasts.
September through May is the stretch where exterior installation runs into the fewest weather problems in Macon (9 of 12 months). June, July and August have an average daytime high of 90°F or more.
Macon gets about 47 inches of precipitation in a normal year. The wettest months are June, July and December (4.8 inches in July). Inside the workable window, May and October are the driest, at 2.6 and 2.6 inches. The station averages about 85 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 59 | 36 | 4.3 | Workable |
| Feb | 63 | 39 | 4.2 | Workable |
| Mar | 71 | 45 | 4.3 | Workable |
| Apr | 78 | 51 | 3.6 | Workable |
| May | 86 | 60 | 2.6 | Workable |
| Jun | 91 | 68 | 4.4 | Hot |
| Jul | 94 | 72 | 4.8 | Hot |
| Aug | 92 | 71 | 4.4 | Hot |
| Sep | 88 | 65 | 3.7 | Workable |
| Oct | 79 | 53 | 2.6 | Workable |
| Nov | 69 | 43 | 3.4 | Workable |
| Dec | 61 | 38 | 4.6 | Workable |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,450 to $8,200 for Macon, GA is attached.
A detailed PDF report of this estimate, $9
The report lays out the aluminum fence numbers for Macon, GA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in Macon: your questions
+How much does it cost to install an aluminum fence in Macon?
For 150 linear ft, expect $3,350 to $10,300 in the Macon area. A standard-spec job lands at $5,450 to $8,200. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in Macon?
About $22 to $67.50 per linear ft for materials and labor, plus $35 to $130 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in Macon or Warner Robins?
Warner Robins is 25 miles away. The midpoint for 150 linear ft there is $7,050, which is 4% more than Macon ($6,800). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Macon?
About 30% at the midpoint, or $2,050 out of $6,800. Materials are 69% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in Macon?
$3,350 to $10,300. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in Macon?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $130 for fees in the Macon area (our national range of $40 to $150 scaled by the local price level).
+Is Macon expensive for aluminum fence compared with the rest of Georgia?
Macon is 4% below the Georgia statewide estimate ($7,100 at the midpoint). We cover 10 metros in Georgia; see the state page to compare them.
+What do carpenters earn in Macon?
The BLS median is $20.03 an hour in the Macon area, compared with $29.12 nationally. The 25th to 75th percentile range is $16.47 to $27.05.
+What do basic and premium aluminum fence work cost in Macon?
For 150 linear ft, basic work runs $3,350 to $6,150 and premium work $7,500 to $10,300. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+When is the best time to install an aluminum fence in Macon?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. May and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Macon?
$170 to $780, from a national range scaled by the local wage and goods indexes.
Aluminum fence near Macon
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.